July 2010
VE278Q/VK278Q Series
LED Monitor
User Guide
VE278Q
VK278Q
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extention cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
•
•
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
•
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
iv
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the LED. Never spray cleaner directly on the screen, as it may drip
inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the fluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when
trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1.
2.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
vi
1.1
Welcome!
Thank you for purchasing the ASUS® VE278Q/VK278Q Series LED monitor!
The latest widescreen LED monitor from ASUS provides a crisper, broader, and
brighter display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the VE278Q/VK278Q Series brings you!
1.2
Package contents
Check your VE278Q/VK278Q Series LED monitor package for the following items:
LED monitor
Monitor base
1 x CD (Only available for model VK278Q)
Quick start guide
Warranty card
1 x Power cord
1 x VGA cable
1 x WebCam USB cable (Only available for model VK278Q)
1 x DVI cable
1 x Audio cable
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LED Monitor VE278Q/VK278Q Series
1-1
1.3
Assembling the monitor base
To assemble the monitor base:
1.
2.
Attach the base to the arm and fix with the screw to join them tightly. You can
easily tighten the screw by fingers.
Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2
1
Make sure to screw the base to the arm tightly.
1.4
Connect cables
To connect cables:
Connect the cables you need based on chapter 1.5.2, page1-5.
1-2
Chapter 1: Product Introduction
1.5
Monitor introduction
1.5.1
Front of the LED monitor
1
2
3
4
5
6
7
1.
Button:
•
Automatically adjust the image to its optimized position, clock, and
phase by long pressing this button for 2-4 seconds (for VGA mode only).
•
•
Use this hot key to switch from six video preset modes (Scenery Mode,
Standard Mode, Theater Mode, Game Mode, Night View Mode, and
sRGB Mode) with SPLENDID™ Video Enhancement Technology.
Exit the OSD menu or go back to the previous menu as the OSD menu
is active.
2.
Button:
•
Press this button to activate the Picture-in-picture function.
•
Both the DVI and HDMI input source should not be selected as both the
Main and PIP source simultaneously.
3.
Button:
•
Press this button to decrease the value of the function selected or move
to the next function.
•
This is also a hot key for Volume adjustment.
4.
MENU Button:
•
•
Press this button to enter the OSD menu.
Press this button to enter/select the icon (function) highlighted while the
OSD is activated.
ASUS LED Monitor VE278Q/VK278Q Series
1-3
5.
6.
Button:
•
•
Press this button to increase the value of the function selected or move
right/up to the next function.
This is also a hot key for Brightness adjustment.
Input Select Button:
•
Use this hot key to switch from VGA, DVI, HDMI and DisplayPort input
signal.
Press
(Input Select button) to display HDMI signals
after you connect HDMI cable with the monitor.
7.
Power Button/Power Indicator:
•
•
Press this button to turn the monitor on/off.
The color definition of the power indicator is as the below table.
Status
Blue
Description
ON
Amber
OFF
Standby mode
OFF
1-4
Chapter 1: Product Introduction
1.5.2
Rear of the LED monitor
Screw Holes for
VESA Wall Mount
7
1
2
3
4
5
6
8
Rear connectors
1
2
3
4
5
6
7
8
AC-IN port
DisplayPort
HDMI-IN port
DVI port
VGA port
Audio Line-in port
Earphone-out port
USB-IN port (Only available for model VK278Q)
ASUS LED Monitor VE278Q/VK278Q Series
1-5
2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VE278Q/VK278Q Series LED monitor is specially
designed for VESA wall mount.
To detach the arm/stand:
1.
2.
3.
Disconnect power and signal cables. Carefully put the front of the monitor
face down on a clean table.
Use a screwdriver to remove the two screws that secure the stand to the
monitor.
Detach the stand from the monitor.
•
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the stand of the monitor while removing the screws.
•
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.8
Kg (Screw size: 4 x 12 mm).
2-1
Chapter 2: Setup
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
•
•
Hold the stand to prevent the monitor from falling while changing its angle.
You can adjust the monitor’s angle from -5˚ to 20˚.
-5 ~ 20
2.3
Install LifeFrame 2 software
ASUS VK278Q series provides the easy-to-use LifeFrame 2 software that can work
with the webcam, allowing users to create their own photos or video clips.
•
•
The LifeFrame 2 software currently supports Microsoft® Windows® 7/Vista/
XP Service Pack 2 operating systems.
The LifeFrame 2 software is bundled in the support CD.
Installation instructions
1.
2.
3.
Close all other applications.
Insert the support CD into the optical drive and run the LifeFrame 2 program.
Follow the on-screen instructions to complete the installation.
ASUS LED Monitor VE278Q/VK278Q Series
2-2
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
VE278
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Sound
PIP Settings
Input Select
System Setup
Night View Mode
sRGB
Move
Menu
Exit
1.
2.
Press the MENU button to activate the OSD menu.
Press and to navigate through the functions. Highlight and activate
the desired function by pressing the MENU button. If the function selected
has a sub-menu, press and again to navigate through the sub-menu
functions. Highlight and activate the desired sub-menu function by pressing
the MENU button.
3.
4.
Press and to change the settings of the selected function.
To exit the OSD menu, press the
button. Repeat step 2 and step 3 to
adjust any other function.
3.1.2
OSD Function Introduction
1.
Splendid
This function contains six sub-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to maintain
your setting or return to the preset mode.
VE278
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Sound
PIP Settings
Input Select
System Setup
Night View Mode
sRGB
Move
Menu
Exit
•
Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™ Video Enhancement.
3-1
Chapter 3: General Instruction
•
•
•
•
Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Enhancement.
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Enhancement.
Game Mode: This is the best choice for game playing with SPLENDID™
Video Enhancement.
Night View Mode: This is the best choice for playing dark-scene game or
watching movie with SPLENDID™ Video Enhancement.
•
In the Standard Mode and sRGB, the Saturation, Color Temp., Skin
Tone, Sharpness, and ASCR functions are not user-configurable.
2.
Color
Select the image color you like from this function.
VE278
Splendid
Color
Brightness
Contrast
90
80
Image
Sound
Saturation
Color Temp
User Mode
PIP Settings
Input Select
System Setup
Skin Tone
Move
Menu
Exit
•
Brightness: The adjusting range is from 0 to 100. The
button is also a
hot key to activate this function.
•
•
•
Contrast: The adjusting range is from 0 to 100.
Saturation: The adjusting range is from 0 to 100.
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and one User Mode.
•
Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
In the User Mode, colors of R (Red), G (Green), and B (Blue) are
userconfigurable; the adjusting range is from 0 ~ 100.
ASUS LED Monitor VE278Q/VK278Q Series
3-2
3.
Image
You can adjust the image Sharpness, Trace Free, Aspect Control, Position
(VGA only), and Focus (VGA only) from this main function.
VE278
Splendid
Color
Sharpness
Trace Free
Aspect Control
ASCR
50
0
Image
Sound
Full
PIP Settings
Input Select
System Setup
Position
Focus
Move
Menu
Exit
•
•
•
•
•
Sharpness: Adjusts the picture sharpness. The adjusting range is from 0
to 100.
Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, “1:1”, or “Over
Scan” (Only available for HDMI input).
ASCR: Select YES or NO to enable or disable dynamic contrast ratio
function.
Position: Adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(Only available for VGA input).
•
Focus: Reduces Horizontal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (Only available for VGA input).
4.
Sound
Adjusts the sound settings to your preference.
VE278
Splendid
Color
Volume
Bass
50
50
50
50
Image
Sound
Treble
Balance
PIP Settings
Input Select
System Setup
Mute
OFF
Move
Menu
Exit
3-3
Chapter 3: General Instruction
•
Volume: Adjusts the output volume level. The
button is also a hot
key to activate this function.
•
•
•
•
Bass: Adjusts the output bass level.
Treble: Adjusts the output treble level.
Balance: Adjusts the balance between the left and right front speakers.
Mute: Mutes the output volume.
5.
PIP Settings
The PIP Settings allows you to open up another sub-window connected
from another video source besides the main-window from your original
video source. By activating this function, you can have two pictures from two
different video sources displayed by one monitor.
VE278
Splendid
Color
PIP Mode
PIP Source
Size
OFF
Image
Sound
Position
PIP Settings
Input Select
System Setup
Swap
Move
Menu
Exit
•
•
PIP Mode: Turns the PIP function on or off.
PIP Source: Selects the video input source from VGA, DVI, HDMI, or
DisplayPort connector.
•
•
Size: Adjusts the PIP size. The options are: Small, Middle, or Large.
Position: Adjusts the PIP position in the main-window. The options are:
Right-Top, Left-Top, Right-Bottom, or Left-Bottom.
•
SWAP: Swaps the source of the main and sub-window.
Both the DVI and HDMI input sources should not be selected each for
the Main and PIP source simultaneously.
Main-Channel
VGA
DVI
HDMI DisplayPort
VGA
DVI
HDMI
•
•
X
•
•
•
Sub-Channel
•
•
•
X
•
DisplayPort
•
ASUS LED Monitor VE278Q/VK278Q Series
3-4
6.
Input Select
Select the input source from VGA, DVI, HDMI, or DisplayPort.
VE278
Splendid
Color
VGA
DVI
Image
Sound
HDMI
DisplayPort
PIP Settings
Input Select
System Setup
Move
Menu
Exit
7.
System Setup
Adjusts the system configuration.
VE278
Splendid
Color
Splendid Demo Mode
AI Light
OFF
OFF
Image
Sound
OSD Setup
Information
PIP Settings
Input Select
System Setup
Language
All Reset
English
Move
Menu
Exit
•
•
Splendid Demo Mode: Activate the demo mode for the Splendid
function.
AI Light: Automatically adjust the screen backlight according to
the surroundings. The monitor backlight will turn brighter in a bright
surroundings, or turn darker in a dark surroundings. As the light sensor is
located on the top of the monitor, do not block the sensing area.
•
OSD Setup: Adjusts the horizontal position (H-Position), vertical position
(V-Position), OSD Timeout, DDD/CI, and Transparency of the OSD
screen.
•
•
Information: Displays the monitor information.
Language: Selects OSD language. The selections are English, French,
German, Spanish, Italian, Dutch, Russian, Traditional Chinese, Simplified
Chinese, and Japanese.
•
All Reset: Set to “Yes” to revert all settings to the factory default mode.
3-5
Chapter 3: General Instruction
3.2
Specifications
Model
VE278Q
VK278Q
27.0”W (68.6cm)
1920x1080
300cd/m2
Panel Size
27.0”W (68.6cm)
1920x1080
300cd/m2
Max. Resolution
Brightness (Typ.)
Intrinsic Contrast Ratio (Typ.)
Viewing Angle (CR=10)
Display Colors
1000:1
1000:1
160°(V) /170°(H)
16.7 M(6bit Hi FRC)
2ms (Gray to Gray)
-
160°(V) /170°(H)
16.7 M(6bit Hi FRC)
2ms (Gray to Gray)
2.0M
Response Time
Webcam (built-in)
Satellite Speaker
Earphone Output
Sound from HDMI
HDMI input
3W x 2 stereo
Yes
3W x 2 stereo
Yes
Yes
Yes
Yes
Yes
DVI input
DVI with HDCP
Yes
DVI with HDCP
Yes
D-Sub input
DisplayPort input
Audio Line-in
Yes
Yes
Yes
Yes
Power ON Consumption
Tilt
45W
45W
-5° ~ +20°
Yes (100mm x 100mm)
643x445.6x220
732x560x176
6.5 kg
-5° ~ +20°
Yes (100mm x 100mm)
643x459.6x220
732x560x176
6.5 kg
VESA Wall Mounting
Phys. Dimension (WxHxD)
Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
9.8 kg
9.8 kg
AC 100~240V(Built-in)
AC 100~240V(Built-in)
*Specifications are subject to change without notice.
ASUS LED Monitor VE278Q/VK278Q Series
3-6
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
Press the
ON mode.
Check if the power cord is properly connected to the
monitor and the power outlet.
The power LED lights amber and
there is no screen image
•
•
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly
•
•
Press the
button for two seconds to
automatically adjust the image.
Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
•
Perform Reset via OSD.
Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
No sound or sound is low
•
Press the
button for two seconds to
automatically adjust the image (for VGA mode only).
Adjust the Phase and Clock settings via OSD.
•
•
Ensure that the audio cable is properly connected to
the monitor and the computer.
•
•
Adjust the volume settings of both your monitor and
computer.
Ensure that the computer sound card driver is
properly installed and activated.
Webcam is not working
(for VK278Q only)
•
•
Make sure that you have connected the USB 2.0
cable securely to both the LED monitor and your
computer.
Make sure that you use the Microsoft Windows
Vista/XP Service Pack 2 operation systems.
3-7
Chapter 3: General Instruction
3.4
Supported Timing List
PC Supported Primary Timing
Input
Mode
Aspect
Ratio
Resolution
H(KHz)
V(Hz)
Pixel (MHz)
640x480, 60Hz
640x480, 72Hz
640x480, 75Hz
640x480, 85Hz
800x600, 56Hz
800x600, 60Hz
800x600, 72Hz
800x600, 75Hz
800x600, 85Hz
1024x768, 60Hz
1024x768, 70Hz
1024x768, 75Hz
1024x768, 85Hz
1152x864, 75Hz
1280x960, 60Hz
1280x1024, 60Hz
31.469
37.861
37.5
59.94
72.809
75
25.175
31.5
31.5
36
VGA
4:3
4:3
43.269
35.156
37.879
48.077
46.875
53.674
48.363
56.476
60.023
68.677
67.5
85.008
56.25
60.317
72.188
75
36
40
SVGA
XGA
50
49.5
56.25
65
85.061
60.004
70.069
75.029
84.997
75
75
4:3
4:3
78.75
94.5
108
108
108
60
60
SXGA
63.981
60.02
5:4
1280x1024, 75Hz
1440x900, 60Hz
1440x900, 75Hz
1680x1050, 60Hz
1920x1080, 60Hz
79.976, P
55.935
70.635
65.29
75.025
59.887
79.984
59.954
60
135
106.5
136.75
146.25
148.5
WXGA+
16:10
WSXGA+
1080P
16:10
16:9
67.5
IBM Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
Input
Mode
Aspect
Ratio
Resolution
H(KHz)
V(Hz)
Pixel (MHz)
640x350, 70Hz
640x350, 85Hz
720x400, 70Hz
720x400, 85Hz
31.469
37.861
31.469
37.927
70.087
85.08
25.175
31.5
DOS
DOS
70.087
85.039
28.322
35.5
MAC Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
Input
Mode
Aspect
Resolution
H(KHz)
V(Hz)
Pixel (MHz)
Ratio
VGA
SVGA
4:3
640x480, 67Hz
832x624, 75Hz
35
49.725
66.667
74.551
30.24
57.2832
4:3
ASUS LED Monitor VE278Q/VK278Q Series
3-8
VESA Modes, User Available Timing
Input
Mode
Aspect
Resolution
H(KHz)
V(Hz)
Pixel (MHz)
Ratio
16:9
16:9
16:9
1280x720, 60Hz(RB)
1280x720, 60Hz
1280x720, 75Hz
1280x768, 60Hz(RB)
1280x800, 60Hz(RB)
1280x800, 60Hz
1280x800, 75Hz
1440x900, 60Hz(RB)
1440x900, 75Hz
1680x1050, 60Hz(RB) 64.674
1920x1080, 60Hz
44.444
44.772
56.456
47.396
49.306
49.702
62.795
55.469
70.635
59.979
59.855
74.777
59.995
59.91
64
74.5
95.75
68.25
71
720P
16:10
16:10
16:10
16:10
16:10
WXGA
59.81
83.5
74.934
59.901
79.984
59.883
59.934
106.5
88.75
136.75
119
WSXGA+
WSXGA+
1080P
16:9
66.587
138.5
HDMI Supported Primary Timing
VESA Modes, Factory Preset Timing
Input
Mode
Aspect
Ratio
Resolution
H(KHz)
V(Hz)
Pixel (MHz)
720(1440)x480i, 59.94 /
60Hz
720(1440)x480i, 59.94 /
60Hz
15.734 /
15.75
15.734 /
15.75
31.469 /
31.5
31.469 /
31.5
4:3
16:9
4:3
59.94 / 60
59.94 / 60
59.94 / 60
59.94 / 60
59.94 / 60
27 / 27.027
27 / 27.027
25.175 / 25.2
27 / 27.027
27 / 27.027
480i
640x480P, 59.94 / 60Hz
720x480P, 59.94 / 60Hz
720x480P, 59.94 / 60Hz
480P
4:3
31.469 /
31.5
16:9
4:3
16:9
4:3
16:9
16:9
16:9
16:9
1440x576i, 50Hz
1440x576i, 50Hz
720x576P, 50Hz
720x576P, 50Hz
1280x720P, 50Hz
15.625
15.625
31.25
31.25
37.5
50
50
50
50
50
27
27
27
27
74.25
576i
576P
720P
1280x720P, 59.94 / 60Hz 44.955 /45 59.94 / 60
74.176 / 74.25
74.25
1920x1080i, 50Hz
28.125
33.716 /
33.75
50
1080i
16:9
1920x1080i, 59.94 / 60Hz
59.94 / 60
74.176 / 74.25
HDMI Supported Optional Timing
Input
Mode
Aspect
Ratio
Resolution
H(KHz)
V(Hz)
Pixel (MHz)
31.469 /
31.5
31.469 /
31.5
4:3
1440x480P, 59.94 / 60Hz
1440x480P, 59.94 / 60Hz
59.94 / 60
59.94/60
54 / 54.054
54 / 54.054
480P
16:9
4:3
16:9
16:9
1440x576P, 50Hz
1440x576P, 50Hz
1920x1080P, 50Hz
31.25
31.25
56.25
67.433 /
67.5
56.25
50
50
54
54
148.5
576P
1080P
16:9
1920x1080P, 59.94 /60Hz
59.94 / 60
148.352 / 148.5
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
3-9
Chapter 3: General Instruction
ASUS LED Monitor VE278Q/VK278Q Series
3-10
|