Cisco 7920 Wireless IP Phone Quick Start Guide
Quick Start Guide - Cisco 7920 Wireless IP Handset
What Is In This Document?
This document contains basic user information for the Cisco 7920 Wireless IP
phones.
The document is not intended as an exhaustive technical guide, rather is user
orientated and covers common tasks and questions.
Cisco 7920 Wireless IP Phone
Cisco IP 7920 Wireless User Guide
Version 1.0
Page 1
Cisco 7920 Wireless IP Phone Quick Start Guide
Basic Call Functions
Feature
Function
Placing a Call
Dial ‘0’ to get a line out
1. Dial the phone number
2. Press the (green key) to place your call
Note: there is no dial tone
Answer a Call
1. Press and release
incoming call
(green key) to connect to the
Place a call while another 1. Press Hold
call is active (using the
same line)
2. Press
or
to display New Call
3. Dial, Redial or Speed Dial a number
End a call
Choose End Call or
(red key) to hang up
Other Call Functions
Feature
Function
Speed Dial
1. Choose Menu > Directory > Corporate Directory
2. Scroll to a Listing: choose Dial or
1. Press PhBook
Dial a number from your
local phone book
2. Scroll to the desired entry
3. Press to dial the number
Use your phone to
answer a call ringing
elsewhere
Use call Pickup
Cisco IP 7920 Wireless User Guide
Version 1.0
Page 3
Cisco 7920 Wireless IP Phone Quick Start Guide
Feature
Function
1. Make sure the call you want to put on hold is
Put a call on hold
highlighted.
2. Press Hold
Remove a call from on
hold
1. Make sure the appropriate call is highlighted
2. Press Resume
Move a call on a shared
line between your
wireless phone and your
desk phone
1. From your phone with the active call, press Hold
2. From your other phone with the shared line, press
Resume
Additional Call Functions
Feature
Function
Transfer a call without
talking to the transfer
recipient
1. From an active call, press
to see Transfer
2. Press Transfer and enter target number
3. Press Transfer again to complete the transfer or End
Call to cancel.
Talk to the transfer
recipient before
transferring a call
(consultative transfer)
1. From an active call, press
to see Transfer
2. Press Transfer and enter the target number
3. Wait for the transfer recipient to answer
4. Press Transfer again to complete the transfer of End
Call to cancel
Set up Call Forwarding
on your primary line
1. Press
to see CFwdALL
2. Press CFwdALL
3. Enter a target number
Cancel Call Forwarding
on your primary line
1. Press
to see CFwdALL
2. Press CFwdALL
Verify that call forwarding Look for the call forward target number in the status
is enabled on your
primary line
line and the
icon next to the primary line
Cisco IP 7920 Wireless User Guide
Version 1.0
Page 4
Cisco 7920 Wireless IP Phone Quick Start Guide
Adjusting Phone Settings
Feature
Function
Adjusting the Speaker
Volume
1. Choose Menu > Profiles > User Profile, then select
the active profile
2. Scroll to Speaker Volume and select it
3. Press
to increase the volume or
to
decrease the volume
4. Press back to make the change
Change the ring volume
Changing the Ring Tone
1. Choose Menu > Profiles > User Profile, then select
the active profile
2. Scroll to and select Ring Volume
3. Press
to increase the volume or
to
decrease the volume
4. Press back to make the change
1. Choose Menu > Phone Settings > Ring Tones >
Select Ring Tone
2. Choose a phone line or the default ring setting
3. Choose a ring tone to play a sample of it
The chosen ring tone plays and a √ appears next to it
4. Press Back to return to Phone Settings
Cisco IP 7920 Wireless User Guide
Version 1.0
Page 5
|