Induction cooktop
CI302DTB, CI603DTB, CI604DTB,
CI754DTB & CI905DTB models
User guide
NZ AU GB IE
1
Contents
Safety and warnings
Introduction
2
8
Choosing the right cookware
Using your induction cooktop
Using your cooktop’s special features
Cooking guidelines
Care and cleaning
Troubleshooting
9
10
16
29
32
33
35
Warranty and service
Important!
SAVE THESE INSTRUCTIONS
The models shown in this user guide may not be available in all markets and are
subject to change at any time. For current details about model and specification
availability in your country, please visit our local website listed on the back cover
or contact your local Fisher & Paykel dealer.
2
Safety and warnings
Operation and maintenance
WARNING!
Electrical Shock Hazard
Do not cook on a broken or cracked
cooktop. If the cooktop surface should
break or crack, switch the appliance off
immediately at the mains power
supply (wall switch) and contact a
qualified technician.
Switch the cooktop off at the wall before
cleaning or maintenance.
Failure to follow this advice may result
in electrical shock or death.
WARNING!
Fire Hazard
Unattended cooking on a hob with fat
or oil can be dangerous and may result
in fire.
NEVER try to extinguish a fire with
water, but switch off the appliance and
cover flame, eg with a lid or fire blanket.
Do not store items on cooking surfaces.
Failure to follow this advice may result
in serious burns or death.
3
Safety and warnings
WARNING!
Health Hazard
This appliance complies with
electromagnetic safety standards.
However, persons with cardiac
pacemakers or other electrical
implants (such as insulin pumps)
must consult with their doctor or
implant manufacturer before using
this appliance to make sure that their
implants will not be affected by the
electromagnetic field.
Failure to follow this advice may result
in death.
4
Safety and warnings
Operation and maintenance
WARNING!
Hot Surface Hazard
During use, accessible parts of this
appliance will become hot enough to
cause burns.
Do not let body, clothing or any item
other than suitable cookware contact
with the ceramic glass until the surface
is cool.
Never leave metal objects (such as
kitchen utensils) or empty pans on the
cooktop as they can become hot very
quickly.
Beware: magnetisable metal objects
worn on the body may become hot in
the vicinity of the cooktop. Gold or silver
jewellery will not be affected.
Keep children away.
Handles of saucepans may be hot to
touch. Check saucepan handles do not
overhang other cooking zones that are
on. Keep handles out of reach of
children.
Failure to follow this advice could result
in burns and scalds.
5
Safety and warnings
Important safety instructions
Never leave the appliance unattended when
in use. Boilover causes smoking and greasy
spillovers that may ignite.
Never use your appliance as a work or storage
surface.
Never leave any objects or utensils on the
appliance.
Do not place or leave any magnetisable objects
(eg credit cards, memory cards) or electronic
devices (eg computers, MP3 players) near
the appliance, as they may be affected by its
electromagnetic field.
We recommend using plastic or wooden
kitchen utensils for cooking with your induction
cooktop.
Never use your appliance for warming or
heating the room.
After use, always turn off the cooking zones and
the cooktop as described in this manual (ie by
using the touch controls). Do not rely on the pan
detection feature to turn off the cooking zones
when you remove the pans.
6
Safety and warnings
Important safety instructions
Do not allow children to play with the appliance
or sit, stand, or climb on it.
Do not store items of interest to children in
cabinets above the appliance. Children climbing
on the cooktop could be seriously injured.
Do not leave children alone or unattended in the
area where the appliance is in use.
Children of less than 8 years old must be kept
away from the appliance unless continuously
supervised. This appliance can be used by
children aged from 8 years and above, and
persons with reduced physical, sensory or
mental capabilities or lack of experience and
knowledge, if they have been given supervision
or instruction concerning the use of the
appliance in a safe way and they understand
the hazards involved. Cleaning and user
maintenance shall not be done by children
without supervision.
Do not repair or replace any part of the
appliance unless specifically recommended in
the manual. All other servicing should be done
by a qualified technician.
Do not use a steam cleaner to clean your
cooktop.
Do not place or drop heavy objects on your
cooktop.
7
Safety and warnings
Important safety instructions
Do not stand on your cooktop.
Do not use pans with jagged edges or drag pans
across the ceramic glass surface as this can
scratch the glass.
Do not use scourers or any other harsh/abrasive
cleaning agents to clean your cooktop, as these
can scratch the ceramic glass.
If the power supply cable is damaged, it must
only be replaced by a qualified technician.
Do not operate your cooktop by means of an
external timer or separate remote-control
system.
8
Introduction
Introducing your cooktop
Congratulations on your new purchase. Your Fisher & Paykel induction cooktop is the ultimate in
induction cooking, giving you the speed, precision, and simplicity of electronic control, and the
easy-care elegance of a ceramic glass surface. For more information, visit our local website listed
on the back cover.
A word on induction cooking
Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by
electromagnetic vibrations generating heat directly in the pan, rather than indirectly through
heating the glass surface. The glass becomes hot only because the pan eventually warms it up.
This technology has a number of advantages over traditional radiant energy cooking:
Heat-up times are much faster.
Use is safer as no heating takes place unless a suitable pan is placed on the cooking zone.
As heat is transferred without loss, you save energy.
Before using your new cooktop
Read this guide, taking special note of the ‘Safety and warnings’ section.
Remove any protective film that may still be on your cooktop.
Using the touch controls
The controls respond to touch, so you don’t need to apply any pressure.
Use the ball of your finger, not its tip.
Make sure the controls are always clean, dry, and there is no object (eg a utensil or a cloth)
covering them. Even a thin film of water may make the controls difficult to operate.
9
Choosing the right cookware
Important!
Only use cookware with a base suitable for induction cooking.
Look for the induction symbol on the packaging or the bottom of
the pan.
You can check whether your cookware is suitable by carrying out
a magnet test. Move a magnet towards the base of the pan. If it is
attracted, the pan is suitable for induction.
If you do not have a magnet:
1
2
3
Put some water in the pan you want to check.
Follow the steps under ‘To start cooking’ opposite.
If
does not flash in the display and the water is heating, the pan is suitable.
Cookware made from the following materials is not suitable: pure stainless steel, aluminium or
copper without a magnetic base, glass, wood, porcelain, ceramic, earthenware.
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is similar in size as
the cooking zone. A small pot on a large cooking zone may not be detected. Always centre your
pan on the cooking zone.
Always lift pans off the cooktop– do not slide, or they may scratch the glass.
10
Using your induction cooktop
5
5
5
1
1
4
5
5
5
CI603DTB model
CI604DTB model
CI302DTB model
2
1
1
2
1
2
4
3
2
CI905DTB model
CI754DTB model
Cooking
Zone
Zone
Diameter
Power
PowerBoost
Recommended
minimum pan size
1
2
3
4
145 mm
180 mm
1400 W
1850 W
2200 W *
3000 W *
120 mm
145 mm
145 mm
210 mm
2300 W
3700 W *
180/260 mm
1850/2600 W
3000/5500 W *
125 mm (inner zone)
250mm (dual zone)
5
SmartZone
2100 W
3700 W **
120mm (un-bridged)
250mm (bridged)
*
Maximum output when set on PowerBoost.
** PowerBoost is not available when cooking zones are bridged.
See ‘Using your cooktop’s special features.’
11
Using your induction cooktop
Control panel
Zone timer
indicator
if brightly lit:
GentleHeat
Timer Control
timer is selected
and ready to be set
if dimly lit:
indicators
if on:
timer is active
if off:
if one is lit:
gentle heat is
activated
Heat
Setting
Display
Cooking
Zone
identifier
Bridging
timer is
Timer
Display
Zone
indicator counting down
timer is off
if on:
cooktop is on
if off:
if on:
controls
(except
ON/OFF) are
locked and
unresponsive
if off:
controls are
responsive
ON/OFF
control
Turns the
cooktop on
and off
Keylock
control:
Locks the
controls
(except
ON/OFF)
to prevent
unintended
use
GentleHeat
control
Setting selector:
Touch this area or
slide your finger
along it to select
the heat setting.
The display lights
above the selector
correspond to the
setting levels (0-9)
cooktop is off
To select a setting on the selector:
Touch at one point to “jump” to a
specific setting
OR
slide your finger along the selector.
12
Using your induction cooktop
To start cooking
1
Touch and hold the ON/OFF
control for 2 seconds.
2
0 will appear in the cooking zone displays.
A white indicator light will glow.
3
Place a suitable pan on the
cooking zone you wish to use.
Make sure the bottom of the pan
and the surface of the cooking
zone are clean and dry.
4
Select a heat setting by touching or sliding
the setting selector with your finger.
If you don’t choose a heat setting within 20
seconds, the cooktop will automatically
turn off. Start with step 1 again.
You can modify the heat setting at any time
during cooking.
Important!
Always place small pans in the centre
of the cooking zone.
13
Using your induction cooktop
If a display flashes
alternately with the heat setting
This means that:
you have not placed a pan on the correct cooking zone or
the pan you’re using is not suitable for induction cooking or
the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.
Dual zone cooking (CI905DTB & CI603DTB models only)
When using a small pot on the dual cooking zone, be sure to centre it so that the inner zone will
detect the pan. If the pan covers the outer zone, then the outer zone will automatically switch
on.
SmartZones (CI604DTB & CI302DBT models only)
The SmartZones are large. You may place several small pots on the SmartZone and they will be
detected as if they were one large pot.
Important!
The whole of the SmartZone is activated when a pot is detected. This means that other magnetisable items
(such as cutlery) sitting in the cooking zone will heat up.
Never leave cutlery or other magnestisable items on your cooktop.
14
Using your induction cooktop
When you have finished cooking
1a Turn the cooking zone off by touching or
sliding down to 0.
1b Turn the whole cooktop off by
touching the ON/OFF control.
Make sure the display shows 0.
2
Beware of hot surfaces
will flash in the window of any cooking zone that is too hot to touch. It will remain on and
H
steadily lit even when the cooktop is turned off. It will disappear when the surface has cooled
down to a safe temperature.
15
Using your induction cooktop
Locking the controls
You can lock the controls to prevent unintended use
(for example children accidentally turning cooking zones on).
When the controls are locked, all controls except the ON/OFF control are disabled.
To lock the controls
1
2
Make sure that the cooktop is turned on but no cooking zone is in use.
Touch and hold the keylock control
for 5 seconds. The white indicator light above the
control comes on, indicating that the controls are locked.
Note: the cooktop will automatically turn off after 20 seconds, but the controls will still be locked
when you turn the cooktop on again.
If any controls are accidentally touched while the cooktop is locked the white ‘lock’ indicator
light will flash and the cooktop will remain locked.
To unlock the controls
1
2
Make sure the cooktop is turned on.
Touch and hold the keylock control
control goes out.
for 3 seconds. The white indicator light above the
3
You can now start using your cooktop.
16
Using your cooktop’s special features
Using the PowerBoost feature
This feature enables you to sear meat or bring liquid to the boil very quickly. When a cooking
zone is set for PowerBoost, it uses more than 100% of the power of that particular cooking zone,
resulting in a boost of intense heat.
Important!
PowerBoost heats food and liquids very quickly. Do not leave the cooktop unattended when using this
feature.
To set a cooking zone for PowerBoost
1
With the cooktop turned on, touch or slide the setting selector up to the last setting on the right
until
P
is displayed.
When PowerBoost is set
10 mins
The cooking zone will be on PowerBoost (more than 100%) for 10 minutes,
P
will then flash for
(100%).
a few seconds before the cooking zone automatically reduces the heat to setting
9
To quit the PowerBoost setting
Either touch or slide the setting selector to a new setting or to 0 to turn the cooking zone off.
17
Using your cooktop’s special features
Note:
You can set two (CI603DTB, CI604DTB and CI754DT) or three (CI905DTB) cooking zones for
PowerBoost, as long as one is not behind the other. For example:
CI754DTB model shown as an example
If one cooking zone is set to PowerBoost and you accidentally select a second cooking zone
immediately in front or behind it also setting it to PowerBoost, the first cooking zone will warn
you that the configuration is not possible, flash and then automatically reduce its power level.
P
When a cooking zone is set for PowerBoost, the cooking zone immediately in front of or behind
may automatically reduce its power level.
PowerBoost is not available if cooking zones are bridged.
18
Using your cooktop’s special features
Using the GentleHeat feature
There are two Gentle heat settings.
The Low setting
is ideal for the most delicate cooking tasks (such as melting chocolate), as
the cooking zone will provide a very low continuous gentle heat.
The Medium setting
delicate foods.
is ideal for keeping cooked food warm and the gentle warming of
To set a cooking zone for GentleHeat
1a With the cooktop turned on, touch the
GentleHeat control.
1b If you want the Medium setting, touch
the GentleHeat control again to select
the Medium setting.
The Low setting indicator above will
glow and U will show in the display.
The Medium setting indicator above
will glow and the Low setting indicator
goes out.
Touching the control a third time will
switch off the cooking zone altogether.
To quit the GentleHeat setting
Either touch or slide the setting selector to a new setting or to 0 to turn the cooking zone off.
19
Using your cooktop’s special features
Using the Auto Heat-reduce feature
Cooking zones set for this feature will:
first quickly heat up food or liquid at the highest setting
then automatically reduce the heat to a pre-selected lower setting to cook the food through.
To set a cooking zone for Auto Heat-reduce
1
With the cooktop turned on, touch or
slide the setting selector to the level
that you wish the cooking zone to
automatically reduce to.
2
Hold your finger on the control for 3
seconds until the letter starts to flash,
alternately with the temperature you have
selected.
A
Do not lift your finger.
The control is now set and you can move
your finger away.
20
Using your cooktop’s special features
When Auto Heat-reduce is set
Initially, while the cooking zone is
at the highest setting, A will flash
alternately with your selected lower
setting. The length of time at the
highest setting depends on the lower
heat setting selected. See chart below.
Then, when the period of highest setting
is over, A will stop flashing and the
cooking zone will automatically reduce
the heat to your pre-selected lower
setting.
If you would like a lower or higher heat setting than you originally selected, simply slide to the
new setting and hold until the A starts flashing. Alternatively, wait until A stops flashing and
then modify the heat setting.
Pre-selected lower heat setting
Approx. length of time at highest setting
1
2
3
4
5
6
7
8
40 seconds
1 minute
2 minutes
3 minutes
4 minutes
7 minutes
2 minutes
3 minutes
To quit the Auto Heat-reduce setting while A is flashing
Either touch or slide the setting selector to a new setting or to 0 to turn the cooking zone off.
Note:
The Auto Heat-reduce and PowerBoost features cannot be used together. If you turn
PowerBoost on when Auto Heat-reduce is already set, the Auto Heat-reduce will cancel and
PowerBoost will stay on.
21
Using your cooktop’s special features
Using the timer
You may use the timer in two different ways:
You can use it as a minute minder, even when not using the cooktop.
When used as a minute minder, the timer will not turn any cooking zone off when
the set time is up.
You can set it to turn one or more cooking zones off after the set time is up.
You can set the timer for up to 1 hour and 59 minutes.
The time will be displayed in hours and minutes when the timer is set for longer than 10
minutes.
Using the timer as a minute minder
If you are not using any cooking zones
You can set the minute minder when you are not using any cooking zones. The cooktop will turn
itself off after 20 seconds after you have set the time, but the timer will continue to count down.
To change or cancel the minute minder setting, you will have to turn the cooktop back on. See
‘To change or cancel a timer setting’.
.
2
Set the time.
Hint: the minutes will scroll faster if you
touch and hold – or + continuously.
1a Make sure the cooktop is turned ON.
Touch the – and + controls of the timer
together. 0.00 will show in the minute
display.
1b The egg timer
will glow.
When the set time is up
3
A few seconds after the time is set it will
0.00 will flash and the timer will beep.
Touch the – or + controls to stop the
beeping.
Remember, touching the ON/OFF control
will turn the whole cooktop off!
begin to countdown. The display will
show the remaining time in hours and
minutes or if less than 10 minutes, in
minutes and seconds.
22
Using your cooktop’s special features
Using the cooking zone after you have a set the minute minder
If you start using a cooking zone after you have set the minute minder, the minute minder will
continue to count down.
You may also set cooking timer to turn a zone off (see opposite).
Setting the minute minder when you are using one or more cooking zones.
.
1
To set the minute minder when the cooking
zone(s) are already being used, repeatedly
tap the – and + controls of the timer
2
Set the time.
Hint: the minutes will scroll faster if you
touch and hold – or + continuously.
together to cycle through the individual
timers
for the cooking zones until the
egg timer
glows. 0.00 will steadily
show in the minute display.
(eg if you have 5 cooking zones, you will
need to tap the – and + controls of the timer
3
A few seconds after the time is set it will begin to countdown. The display will show the
remaining time in hours and minutes, or if less than 10 minutes, in minutes and seconds.
When the set time is up
0.00 will flash and the timer will beep. Touch the – or + controls to stop the beeping.
Remember, touching the ON/OFF control will turn the whole cooktop off!
23
Using your cooktop’s special features
Setting the timer to turn one or more cooking zones off
.
1
Make sure the cooking zone(s) you want
to set the timer for are in use.
2
Tap the
–
and
+
controls of the timer
together until the indicator of the desired
cooking zone comes on.
Note: only indicators of cooking zones in
use will show as you scroll through.
3
Set the time.
You may now continue to set the timer for additional cooking zones:
.
4
Cycle through the zones, by tapping the – and + controls of the timer together until the timer
indicator of the required cooking zone comes on.
Note: the indicator of the cooking zone previously set will be dimly lit, showing you that the
timer is set and counting down for that cooking zone.
24
Using your cooktop’s special features
5
Set the time.
You can set different times for each of the cooking zones.
Setting the minute minder when other timers are set
1
2
Repeatedly tap the – and + controls of the timer together as you cycle through the individual
timers
for the cooking zones until the egg timer
glows. 0.00 will steadily show in the
minute display.
Touch the – and + controls to set the timer. It will then countdown.
Note the indicator lights of the previously set cooking zones will be dimly lit, showing you that
the timers are set and counting down.
When the timer is set
If more than one timer is set (including the minute minder), the indicator belonging to the
cooking zone or minute minder with the shortest remaining time setting will glow brightly.
Other timer indicators will be dimly lit.
To check the remaining time for another cooking zone:
Touch the
–
and
+
controls of the timer together and repeat until the indicator in the desired
cooking zone window glows brightly.
When the set time is up
The cooking zone whose set time is up will automatically turn off.
0.00will flash in the minute display.
The timer will beep.
Touch the
–
or
+
control to stop the beeping.
The timer indicator of the relevant cooking zone will go out. The display will show
0.
If the timer is still set and counting down for another cooking zone
The cooking time for the timer with the shortest remaining time left will be displayed and the
corresponding timer indicator will glow brightly.
25
Using your cooktop’s special features
To change or cancel a timer setting
1
With the cooktop turned on, repeatedly tap the – and + timer controls together until the
indicator light in the desired cooking zone window glows brightly.
2
To change:
2
To cancel:
Set the new time.
OR
Touch the
–
control of the timer and hold
until the minute display shows
0.
Important!
Scrolling down the time to
the cooking zone.
0
will not turn off
When you have finished cooking, either touch
or slide the setting selector to a new setting or
to 0to turn the cooking zone off.
26
Using your cooktop’s special features
Using Bridging Zones (CI302DTB & CI604DTB SmartZone models only)
The bridging zone function allows you to use two SmartZones together giving you a
larger cooking area. Your pan(s) will need to cover both cooking zones.
There may be a cooler area in the centre of the cooktop between the cooking zones. You
may need to move food around the pan to ensure even cooking.
When using bridging zones it is not possible to use the PowerBoost function.
Important!
You can only bridge a cooking zone with the one directly behind it. It is not possible to bridge
cooking zones that are side by side.
CI302DTB model
CI604DTB model
Bridging zone
Bridging zone
Bridging zone
cooler area
cooler area
cooler area
setting selector
for bridged zone
setting selector for
left bridged zone
setting selector for
right bridged zone
To select the bridging function
1
Place the pan on the cooktop over the two zones you wish to use, covering both cooking zones
(as shown above).
2
Touch the setting selectors (anywhere) of both cooking zones at the same time. The bridging
zone indicator light will show in both control windows.
in the right hand display.
Owill show in the left hand display,
27
Using your cooktop’s special features
3
Use the left hand setting selector to set the heat setting for the combined zone.
The heat setting will be displayed in the left hand cooking zone control window only, but the
setting indicator lights will glow on both cooking zones. The right hand selector will show
.
If no pan is detected
If no pan is detected on either cooking zone the left hand zone display will alternate between
the selected setting and
. The right hand selector will show
.
28
Using your cooktop’s special features
If no pan is detected on one cooking zone:
The left hand display will still show the selected temperature and the right hand display will still
show
.
If after 10 minutes no pan is detected:
the bridging function will switch off.
the cooking zone without a detectable pan will turn off.
the remaining cooking zone will continue cooking at the selected heat setting.
Using Automatic Cooking in bridged mode
1
2
3
Bridge the cooking zones by touching both setting slectors (anywhere) simultaneously.
Using the left hand setting selector, select the heat setting.
Hold your finger on the control at the selected heat setting until
selected setting.
A
flashes alternately with the
To cancel bridging
At the same time, touch the setting selectors of both bridged cooking zones.
The bridging indicator lights will go out.
Note: Sliding the scale down to 0 will not turn off bridging.
Note: Cancelling bridging will also cancel the timer for those cooking zones.
Using the timer in bridged mode:
You may only set one timer for the bridged cooking zone. See ‘Setting the timer’.
The timer indicator
will show in both displays.
29
Cooking guidelines
Important!
Take care when frying: oil and fat heat up very quickly, particularly if you’re using PowerBoost. At
extremely high termperatures oil and fat will ignite spontaneously and this presents a serious fire
risk.
Cooking tips
When food comes to the boil, reduce the temperature setting.
Using a lid will reduce cooking times and save energy by retaining the heat.
Minimise the amount of liquid or fat to reduce cooking times.
Start cooking on a high setting and reduce the setting when the food has heated through.
Simmering, cooking rice
Simmering occurs below boiling point, at around 85 OC, when bubbles are just rising occasionally
to the surface of the cooking liquid. It is the key to delicious soups and tender stews because
the flavours develop without overcooking the food. You should also cook egg-based and flour-
thickened sauces below boiling point.
Some tasks, including cooking rice by the absorption method, may require a setting higher than
the lowest setting to ensure the food is cooked properly in the time recommended.
Searing steak
To cook juicy flavoursome steaks:
1
2
3
Stand the meat at room temperature for about 20 minutes before cooking.
Heat up a heavy-based frying pan.
Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot pan and then
lower the meat onto the hot pan.
4
5
Turn the steak only once during cooking. The exact cooking time will depend on the thickness of
the steak and how cooked you want it. Times may vary from about 2 – 8 minutes per side. Press
the steak to gauge how cooked it is – the firmer it feels the more ‘well done’ it will be.
Leave the steak to rest on a warm plate for a few minutes to allow it to relax and become tender
before serving.
For stir-frying
When stir-frying be careful to lift the pan clear of the surface if tossing the ingredients. Sliding
the pan across the cooktop surface may scratch it.
1
2
Choose an induction compatible flat-based wok or a large frying pan.
Have all the ingredients and equipment ready. Stir-frying should be quick. If cooking large
quantities, cook the food in several smaller batches.
3
4
5
Preheat the pan briefly and add two tablespoons of oil.
Cook any meat first, put it aside and keep warm.
Stir-fry the vegetables. When they are hot but still crisp, turn the cooking zone to a lower setting,
return the meat to the pan and add your sauce.
6
7
Stir the ingredients gently to make sure they are heated through.
Serve immediately.
30
Cooking guidelines
Heat settings
The settings below are guidelines only. The exact setting will depend on several factors,
including your cookware and the amount you are cooking. Experiment with the cooktop to find
the settings that best suit you.
100
80
60
40
20
0
u
1
2
3
4
5
6
7
8
9
P
Heat setting
31
Cooking guidelines
Heat setting
Suitability
melting chocolate, butter, and foods that burn quickly
u
delicate warming for small amounts of food
gentle simmering
slow warming
1
-
2
4
reheating
rapid simmering
cooking rice
3
-
pancakes
5
7
-
-
6
8
sautéing
cooking pasta
stir-frying
searing
bringing soup to the boil
9
P
boiling water
32
Care and cleaning
What?
How?
Important!
Everyday soiling
on glass
(fingerprints, marks,
stains left by food or
non-sugary spillovers
on the glass)
1
Switch the power to the
When the power to the cooktop
cooktop off at the wall.
Apply cooktop cleaner while
the glass is still warm (but not
hot!)
Rinse and wipe dry with a
clean cloth or paper towel.
Switch the power to the
cooktop back on at the wall.
is switched off, there will be no
‘hot surface’ indication but the
cooking zone may still be hot!
Take extreme care.
Heavy-duty scourers, some nylon
scourers and harsh/abrasive
cleaning agents may scratch the
glass. Always read the label to
check if your cleaner or scourer is
suitable.
2
3
4
Never leave cleaning residue
on the cooktop: the glass may
become stained.
Boilovers, melts, and
hot sugary spills on
the glass
Remove these immediately
with a fish slice, palette knife
or razor blade scraper suitable
for ceramic glass cooktops, but
beware of hot cooking zone
surfaces:
Switch the power to the
cooktop off at the wall.
Hold the blade or utensil at
a 30o angle and scrape the
soiling or spill to a cool area of
the cooktop.
Remove stains left by melts and
sugary food or spillovers as soon
as possible. If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
Cut hazard: when the safety
cover is retracted, the blade in
a scraper is razor-sharp. Use
with extreme care and always
store safely and out of reach of
children.
1
2
3
4
Clean the soiling or spill up
with a dish cloth or paper
towel.
Follow steps 2 to 4 for
‘Everyday soiling on glass’
above.
Spillover on the touch
controls and stainless
steel strip
1
Switch the power to the
cooktop off at the wall.
Soak up the spill
Wipe the touch control area
with a clean damp sponge or
cloth.
Wipe the area completely dry
with a paper towel.
Switch the power to the
cooktop back on at the wall.
The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them. Make sure you
wipe the touch control area dry
before turning the cooktop back
on.
2
3
4
5
33
Troubleshooting
Troubleshooting chart
Problem
Possible causes
What to do
The cooktop cannot be
turned on.
No power.
Make sure the cooktop is
connected to the power supply
and that it is switched on at the
wall. Check whether there is
a power outage in your home
or area. If you’ve checked
everything and the problem
persists, call your Authorised
Service Centre or Customer
Care.
The touch controls are
unresponsive.
The controls are locked.
Unlock the controls. See section
‘Using your induction cooktop’
for instructions.
The touch controls are
difficult to operate.
There may be a slight film of water Make sure the touch control
over the controls or you may be
using the tip of your finger when
touching the controls.
area is dry and use the ball of
your finger when touching the
controls.
The glass is being
scratched.
Rough-edged cookware.
Use cookware with flat and
smooth bases. See ‘Choosing
the right cookware’.
Unsuitable, abrasive scourer or
cleaning products being used.
See ‘Care and cleaning’.
Some or all displays flash Liquid has spilled onto the touch
Switch the power to the
cooktop off at the wall and
see ‘Care and cleaning’ for
instructions.
and there is a
control area.
continuous beep.
There are objects (eg utensils) on
the touch control area.
Remove the objects from the
touch control area.
Several touch controls are
registering continuous contact
(eg due to someone resting their
hand or arm on the touch control
area).
Remove the cause of
continuous contact.
Pans do not become hot. The cooktop is in ‘Display mode’
The heat setting display
comes on, but the
Contact Customer Care or your
Authorised Service Centre.
does not flash when I
remove a pan.
-0- shows in the timer
display when I turn on
the cooktop.
34
Troubleshooting
Troubleshooting chart
Problem
Possible causes
What to do
Some pans make
crackling or clicking
noises.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
This is normal for induction
cookware and does not indicate
a fault.
The cooktop makes a low This is caused by the technology
This is normal, but the
noise should quieten down
or disappear completely
when you decrease the
heat setting.
humming noise when
used on a high heat
setting (especially
PowerBoost).
of induction cooking.
Fan noise coming from
the cooktop.
A cooling fan built into
your cooktop has come on
to prevent the electronics
from overheating. It may
continue to run even after
you’ve turned the cooktop
off.
This is normal and needs
no action. Do not switch
the power to the cooktop
off at the wall while the
fan is running.
Pans do not become hot
The cooktop cannot detect the
pan because it is not suitable for
induction cooking.
Use cookware suitable for
induction cooking. See
section ‘Choosing the right
cookware’.
and
appears in the
display.
The cooktop cannot detect the
pan because it is too small for
the cooking zone or not
Centre the pan and make
sure that its base matches
the size of the cooking
zone.
properly centred on it.
I have locked the control This is normal. The cooking zones Unlock the controls, deactivate
panel while two cooking
zones are bridged and
the cooktop has not
turned off.
will remain inactive, but the
indicator lights will remain on.
the bridging zones (by touching
the two setting selectors
simultaneously) and then lock
the cooktop again.
PowerBoost is temporarily
unavailable because the
cooktop needs to protect
itself from overheating.
Allow the cooktop to cool
down.
P flashes in the display
when you are trying to
set PowerBoost.
The cooktop or a cooking Technical fault.
zone has turned itself off
unexpectedly, a tone
Please note down the error
letters and numbers, switch
the power to the cooktop off
at the wall, and contact your
Authorised Service Centre or
Customer Care with the
sounds and an error code
is displayed (typically
E or Er alternating with
one or two digits in the
cooking zone displays).
error code information.
35
Warranty and service
Before you call for service or assistance ...
Check the things you can do yourself. Refer to the installation instructions and your user guide
and check that:
1
2
your product is correctly installed
you are familiar with its normal operation.
If after checking these points you still need assistance, please refer to the Service & Warranty
book for warranty details and your nearest Authorised Service Centre, or contact us through our
local website listed on the back cover.
36
Warranty and service
This cooktop has been designed and constructed in accordance with the following
codes and specifications:
In New Zealand and Australia:
AS/NZS 60335-1 General Requirements for Domestic electrical appliances
AS/NZS 60335-2-6 Particular Requirements for Domestic electrical cooking appliances
AS/NZS CISPR 14.1.2010 Electromagnetic Compatibility Requirements.
In Europe:
Safety requirements of EEC Directive “Low voltage” 2006/95:
- EN 60335-1 General Requirements for Domestic electrical appliances
- EN 60335-2-6 Particular Requirements for Domestic electrical cooking appliances
Safety requirements of EEC Directive “EMC” 2004/108:
- EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3 Electromagnetic Compatibility
Requirements
Requirements of EEC Directive 93/68.
European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE)
(for European Union countries only)
GB This appliance is marked according to the European directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
The symbol
on the product, or on the documents accompanying the product, indicates that
this appliance may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment. Disposal
must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
Product details
Fisher & Paykel Ltd
Model
Serial No.
Purchaser
Suburb
Date of Purchase
Dealer
Town
Country
Copyright © Fisher & Paykel 2013. All rights reserved.
The product specifications in this booklet apply to the specific products
and models described at the date of issue. Under our policy of continuous
product improvement, these specifications may change at any time. You
should therefore check with your Dealer to ensure this booklet correctly
describes the product currently available.
NZ AU GB IE
F&P PN - 590487 A
05.2013
|