Grundig AMIRA32HDBLK User Manual

COLOUR  
TELEVISION  
AMIRA32HDBLK  
ENGLISH  
Important Information  
The LCD display panels are manufactured using an extremely high level of precision technology,  
however sometimes some parts of the screen may be missing picture elements or have luminous  
spots. This is not a sign of a malfunction.  
Cleaning the screen and the cabinet...  
After turning off the power, clean the screen and the cabinet with a soft, dry cloth. We recommend  
that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause  
damage.  
Disposal...  
The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury, when the  
set reaches the end of its useful life please dispose of it in accordance with Local Government  
Regulations or at a recycling centre.  
-3-  
Your Television  
We would like this product, which has been manufactured in modern facilities in accordance with  
total quality principles, to offer you the best performance.  
Therefore, we would like you to read this entire manual carefully before you use your product and  
keep it for future reference.  
Special Features  
• Available for cable broadcasts  
• PIP (Picture in Picture) Feature from AV  
• Wide angle of vision  
• Scart socket, AV Socket and external sound system connection  
• S-VHS and Cinch inputs for S-Video connection  
• PC connection  
• Low energy consumption  
• AVL  
• ATS  
• Programmable power off  
• Graphic equalizer  
• The feature of sharpness in Colour Transitions (CTI)  
• Sharpness feature and picture resolution (LTI) in the black-white transitions  
• A clear Picture made possible by the Digital Comb Filter  
• On screen viewing of all settings, program numbers and all the processes  
• Manual Fine Tuning  
• 100 Program memory  
• Infrared Remote Control equipped all the functions  
• Child Lock  
• Feature of viewing the NTSC broadcast to be entered via Scart  
• Easy performance of the processes via the advanced menu system.  
• Ability to choose 26 different menu languages.  
• HDMI feature  
• HDCP feature  
• HD-Ready  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC.  
-4-  
For your security  
This device was designed and manufactured in line with international standards of security. However,  
it is required to be careful for obtaining the best results and ensuring security as in every electrical  
appliance. Hence, please read the following information for your own security. This information is  
for general purposes, it has been prepared to provide you with assistance concerning all the electrical  
products and some of them might not be related to the products you have purchased.  
DO NOT COVER the ventilation openings of the device  
with items such as newspapers, table-clothes, curtains,  
etc. Overheating causes damage and shortens then  
physical life of the device.  
Air Circulation…  
To ensure adequate ventilation, please leave a  
clearance area of at least 10 cm. around the television.  
This clearance prevents the TV from being overheated  
and consequently incurring damage. Using the device  
in dusty environments should also be avoided.  
DO NOT ALLOW any dripping, sprinkling of fluids or  
placing of any objects filled with water such as vases  
on the electrical devices.  
Heat Damage…  
DO NOT PLACE on or near the device any hot objects  
or items with exposed fire such as candles or any night  
lamps. The high temperature might melt plastic parts  
and cause fire.  
Your TV might be subjected to damage under direct  
sunshine or when you leave it beside a heater. Please  
abstain from using the product in very hot or humid  
settings or in the places where there is the possibility  
for the temperature to decrease to the degrees that  
are lower than 5°C (41°F).  
DO NOT USE makeshift stands and NEVER EVER  
attach the legs using wooden screws. To ensure full  
security, always set up the stands or stand legs  
approved by the manufacturer, using the connection  
elements supplied by the manufacturer in accordance  
with the instructios.  
Network Supply…  
The required network supply for this device is 230V~50  
Hz AC. Your television set was manufactured to operate  
with the power cable provided in the accompaniment.  
Never ever connect it to a DC source or to another  
source of power. MAKE SURE that the electric cable  
is not clamped under the TV. DO NOT DISCONNECT  
the network connection plug of this device; since this  
plug is fitted with a special Radio Interference Filter,  
the product performance might decline when there is  
no plug. IF YOU SUSPECT ANYTHING, PLEASE  
REFER TO A SPECIALIZED ELECTRICIAN.  
Since that might lead to enduring loss of hearing, DO  
NOT USE the headphones at very high rates of volume.  
DO NOT LEAVE the device powered on when there  
is no one around if it is not clearly indicated that it can  
be used with no one in presence or if does not have  
a standby mode.  
Power off the device using the switch on it and make  
sure that the other people in your family are also aware  
of this. It might be necessary to make special  
arrangements for the weak and disabled people in the  
family.  
Things to be Done...  
Please READ the operation instructions before  
attempting to use the device.  
If you have any doubts as to whether the operation of  
the device is normal or not or if the device has been  
damaged in any way, DO NOT RESUME THE  
OPERATION. Power off the device, pull the plug and  
refer to the vendor.  
MAKE SURE that all the power connections (network  
communication, extension cables and the connections  
among the device components) have been made  
properly and in connection with the manufacturer's  
instructions. Before making or changing the  
connections, firstly power off the device and take off  
the power network connection plug.  
MOST IMPORTANT OF ALL – NEVER EVER allow  
anybody, especially the children to insert anything  
into the holes on the case or into any other  
openings. In such cases, deadly electric shocks  
might occur.  
NEVER EVER make any estimations concerning  
any electrical device and do not take risks. It is  
better to be on the safe side rather than falling in  
sadness in the aftermath.  
If you have any doubts as regards the installation,  
operation or safety of the device, please REFER to  
the vendor.  
BE CAREFUL about the glass panels and covers on  
the device.  
AFTER TURNING OFF THE POWER SWITCH TO  
TURN OFF THE TELEVISION COMPLETELY,  
DISCONNECT THE POWER CABLE FROM THE  
PLUG.  
Things not to be Done...  
Since that will expose the components loaded with  
dangerous voltage, DO NOT REMOVE any fixed  
covers.  
-5-  
Start  
Remove your television carefully out of its box.  
You can keep the package of your television to  
use it later on.  
3. Press the Main power on/off button  
located on the LCD TV..  
4. To power on your television, press  
any numerical key on the remote control  
Contents of the box  
• Accessory box  
• Power cable  
• Remote Control  
• 2 batteries  
7
or the key “  
“/”  
“.  
For this process, you can also use the  
TV. buttons found on the panel of your  
television. The picture will be visualized  
on the screen after a while.  
Note: The Scart, , HDMI, VGA and RCA cables  
are not supplied with the device.  
Note: If you are not going to use your television  
for a long period of time, make sure to switch it  
off from the power on/off button.  
Antenna connection  
Initial power on and settings performance  
To set up your television, read the parts on the  
TV controls and performance of the broadcast  
settings.  
Batteries  
Open the lid of the battery compartment and  
make sure you have placed the batteries in the  
correct direction.  
For this remote control, the battery types UM-4,  
IEC R03 or AAA 1.5 V are suitable.  
If you use a coaxial cable (round cable) of 75  
Ohms as an antenna cable, connect the antenna  
plug directly to the antenna input located on the  
TV.  
The motorized vehicles, energy and  
telecommunication lines affect your antenna.  
Therefore, be careful about installing your  
antenna away from these and metal surface in  
such a way that it shall not swing.  
Do not throw your old batteries into the fire,  
discard then in the waste areas dedicated to this  
purpose.  
Do not have your antenna cable longer than  
required and do not shape it in a roll. Make sure  
that it is not cramped while passing through a  
window or door.  
Do not use the used, old batteries with new ones  
and different types of batteries together.  
Your antenna and cable might be affected by  
natural phenomena such as rain, wind, smoke  
and humidity over time. Check periodically your  
antenna and equipment.  
The performance of the remote control will be  
reduced at a distance of 8 meters from or at an  
angle of 30 degrees beyond the centre of the  
TV.  
Powering on your set and the  
initial use  
1. Insert the power cable plug supplied with the  
device into the socket.  
2. Insert the power cable into the power supply  
input located on the back panel of the LCD TV.  
Note 1: Your TV will go to stand-by mode in five  
mimutes if there is no broadcast signal  
Note 2: YourTV is equiped to oparate with TV  
buttons in case your R/C is broken or the batteriesare  
exhauseted.  
-6-  
Control Unit  
TV Control Panel  
Menu button.  
MENU  
Program Down/Up button  
P-  
P+  
SOURCE  
TV/AV  
Source selection button.  
Main Power on/off button  
Volume Down/Up button.  
Stand by indicator  
V-  
V+  
External Connections  
Component video input (Y)  
Component video input (Pb)  
Component video input (Pr)  
Main Power Input  
AV1 scart  
Or  
Component sound input (L)  
Component sound input (R)  
R
AV2 scart  
HDMI input  
Antena Input  
HDMI  
VGA (PC connection input)  
PC sound input  
S-VHS Input  
SPDIF Digital audio output  
PC  
AUDIO-IN  
Sound input CINCH connector (Left/L)  
Sound input CINCH connector (Right/R)  
Stereo Headphone socket  
Video output CINCH connector  
Sound output (Right/R)  
Sound output (Left/L)  
Note:  
Please do not use the video RCA and S-Video connection simultaneously, in that case, these  
two devices might influence the picture quality of one another.  
RGB offers the best picture quality over the Scart.  
-7-  
32”  
Panel Size  
32” 16:9 TFT-LCD  
WXGA  
PanelType  
STD.  
STD.  
STD.  
Scart 1  
Scart 2  
Headphone socket  
Audio/Video RCA  
(In/Out)  
STD.  
S-Video socket  
STD.  
STD.  
YUV (Video/Audio)  
Component Input  
HDMI  
STD.  
STD.  
VGA Input  
STD.  
STD.  
PC Sound Input  
SPDIF Digital audio output  
STD: STANDART  
Remote Control  
Picture Format selection button  
Stand-by On/Off button  
Temporary sound mute (Mute) button  
Picture Mode selection button  
PAT (Picture and Teletext)  
Mode Power On-Off button  
PIP size selection button  
PC mode access button  
PC mode access button  
PAT  
Equalizer selection button  
PIP position selection button  
PIP/PAP On-Off button  
PIP SEL.  
AV  
PIP POS.  
PC  
PIP SIZE  
TV  
AV modes selection menu button  
1
4
2
5
8
0
3
6
Numeric buttons  
7
ZOOM  
9
SWAP  
Final program selection button (SWAP)  
Program forward selection button  
ZOOM mode selection button  
PR-  
PR+  
Program down button  
Upward movement button (Menus)  
VOL+  
VOL-  
Volume enhancement button  
Volume turn-down button  
OK/  
FREEZE  
Left movement button (Menu)  
Right movement button (Menus)  
MENU button  
Confirmation(OK) and Temporary  
picture freeze button (Freeze)  
Info / Txt index page button  
MENU  
i
?
Txt Question/Answer button (Reveal)  
Txt Stop button (Hold)  
Downward movement button  
Teletext page enlarge button (Double)  
Red teletext button  
Blue Teletext button  
TEXT/  
MIX  
Green teletext button  
Teletext / Mix selection buttons  
Sub page button (SUB PAGE)  
Yellow teletext button  
UPDATE Button/Teletext time  
-8-  
Performing the initial power-on settings  
TV controls:  
Temporary On-Off (STAND-BY)  
Return to Selected Button Program (SWAP)  
When you press the red ( ) stand-by  
If you would like to return to the program  
you watch by pressing a single button  
while in any program, press the button  
button (Temporary power on-off function)  
located on the upper right hand side of  
your remote control of your television  
when it is switched on; the sound and  
the picture will go off. In the stand-by  
function, the power indicator of your  
television will glow more. To switch your  
PR+  
PR-  
(
). When you press the button (  
)
while in any program or AV, it directly  
switches to the program you selected. If you  
press the same button again, it switches to the  
program you last viewed. If you press the button  
television back on, either press the same button,  
any of the digital buttons or the (  
buttons.  
)/(  
)
(
) while the PIP window is open, the main  
screen and the PIP screen swap places.  
Caution!  
PR 11  
PR 01  
PR 01  
If you are not going to use your television for a  
long period of time, make sure to switch it off  
from the main power button.  
Main Menu  
Press the ( ) button. The Menu including  
all the setting menus will be visualized  
on the screen. Navigating through the  
Menu titles with the up / down movement direction  
buttons ( )/( ) and pressing the up / down  
direction button ( )/( ), you may select the  
menu you would like.  
Program selection  
PR+  
You may enter whichever program  
number you would like by pressing the  
PR-  
buttons (  
)/(  
) located on your  
television and your remote control. To  
select the programs that are over 9, you  
can use the Numerical buttons. You may  
enter the number of the program you  
would like to select using the numerical  
buttons. For example, to switch to the  
program number 12, press relatively the  
buttons number 1 and 2 found on your  
In the event that you wish to exit the application  
at any given stage, simply press the ( ) button.  
Tuning and storing the programs on  
your television  
You can either tune the programs  
automatically or manually storing them in  
your television.  
remote control.  
Note:  
PROGRAMTABLE  
If your television does not receive any  
broadcast for a period of 5 minutes, it  
automatically switches to the stand-by  
position.  
P 00  
P05TRT1  
P06SHOW  
P 07  
P10  
P11  
P12  
P13  
P14  
P 01  
P02TRT1  
P03TRT1  
P04TRT1  
P 08  
P 09  
ODS is displayed on the screen.  
SKIP  
MOVE  
NAME  
DELETE  
OK  
MENU  
SELECT  
BACK  
Temporary sound mute (MUTE)  
To temporarily mute the sound of your  
television, press the ( ) button. In that  
case, the sign ( ) will appear on the  
screen. When you press the same button  
for the second time, the sound will be  
on again. If you press the button ( ) while in  
the Mute mode, the sound level is increased  
and the Mute position is aborted.  
-9-  
Automatic tuning and storing in the  
memory the TV channels via Autoprogram  
COUNTRY SELECTION  
BELGIUM  
HUNGARY  
IRELAND  
ITALIA  
PORTUGAL  
SCHWEIZ  
SUOMI  
CZECH REP.  
DANMARK  
DEUTSCHLAND NETHERLANDS SVERIGE  
The channels located via the  
autoprogram (Automatic Tuning System)  
feature of your television are  
automatically lined up.  
ELLADA  
ESPA  
FRANCE  
NORGE  
TÜRK‹YE  
U. K.  
Ñ
A
ÖSTERREICH  
POLSKA  
. . . . .  
OK  
START AUTOPROGRAMMING  
MENU  
BACK  
is done as the selected country channels  
with teletext and transmitting the channel  
name information ranking the first,  
followed by all the channels not  
transmitting the name information with  
teletext and the ones without teletext  
and finally the foreign channels that do  
not transmit the name information in the  
teletext.  
AUTOPROGRAM  
SEARCHING  
2%  
MENU  
STOP  
Manual tuning and storing of the  
television channels:  
If you already know the Channel  
number:  
Press the ( ) button. Move onto the channel  
settings menu by pressing the down movement  
button ( ). When you select the autoprogram  
Press the ( ) button. Move onto the  
c h a n n e l settings menu by pressing  
the down movement button. Go onto the  
menu with the ( ) button. Select the  
system in which you would like to make  
the search from among the system tabs.  
tab by pressing the Up/down direction ( )/(  
)
buttons and pres the button ( ), the autoprogram  
menu will be visualized on the screen. In the  
country tab, select the country of which you  
would like to watch the broadcast in priority by  
pressing the right/left direction buttons ( )/( ).  
Then, start the autoprogram operation by  
pressing the ( ) or ( ) button.  
Enter the Channel tab by pressing the  
movement button ( ) below. Pressing  
the right-left movement buttons ( )/( )  
or ( ) on your remote control, select  
the “S” for cable channels and “C” for  
broadcasts received via the antenna.  
Move onto the program no. tab and  
select the program in which you would  
like to have the Setup made via the  
numerical buttons.  
The channels will automatically be scanned and  
the channels that have broadcast shall started  
to be entered into memory as of the program  
that is selected on the channel settings menu.  
At the same moment, the Auto-program prompt  
menu will be displayed and the mark indicating  
the position in which the Automatic Setting  
function is found will appear. To stop the process  
at any given time, please press the ( ) button.  
The Program table will appear on the screen  
after the automatic search is over.  
You can assign any channel to any program  
number you would like from among program  
numbers that have been stored in the memory  
as described in the part Program Table.  
If the broadcast viewed on the screen is of your  
desired quality, firstly come onto the storing tab  
via the downward movement ( ) button to store  
in the memory the process you have made and  
select it with the ( ) button. The prompt ‘stored’  
shall be briefly displayed.  
The channel will be stored according to the  
program number of your choice. You can tune  
and store in the memory the other channels in  
the same way. In the event that you wish to exit  
the channel settings menu for any reason, simply  
press the ( ) button.  
SETUP  
SYSTEM  
BG  
C - -  
0
CHANNEL  
FINE TUNE  
SEARCH  
PROGRAM NO  
STORE  
P 01  
AUTOPROGRAM  
MENU  
SELECT  
EXIT  
-10-  
Fine Tuning  
If the current channel requires Fine  
SETUP  
Tuning, then select the fine tuning tab  
SYSTEM  
BG  
C - -  
0
by using the downward movement button  
CHANNEL  
FINE TUNE  
SEARCH  
(
) in the Channel Settings menu.  
Using the right-left movement ( )/( )  
buttons on your remote control, adjust  
the broadcast displayed on the screen  
to your desired quality. Under normal  
circumstances, you will not feel the need  
to use the Fine Tuning function. The  
AFC values of your television will  
automatically adjust and lock themselves  
to the channel. However, you might  
need it in case the television transmitters do not  
operate according to the standards. To store in  
the memory the settings you have made, select  
the Store option and press the right button ( ).  
PROGRAM NO  
STORE  
P 01  
AUTOPROGRAM  
MENU  
SELECT  
EXIT  
If you do not know the channel  
number  
Press the MENU button. Move onto the  
channel settings menu by pressing the  
down movement button. Select the  
program in which you would like to  
perform an Installation using the right-  
left movement ( )/( ) or numerical  
buttons. Select the system in which you  
would like to make the search from  
among the system tabs. Enter the  
System tab by pressing the direction  
button ( ) below. Here, your television  
can be set to a single system and you  
can also select from among more than  
one systems via the ( )/( ) buttons.  
(option) Move from here to the channel  
tab via the downward movement button  
SETUP  
SYSTEM  
BG  
C - -  
0
CHANNEL  
FINE TUNE  
SEARCH  
PROGRAM NO  
STORE  
P 01  
AUTOPROGRAM  
MENU  
SELECT  
EXIT  
Program Table  
(
)
Press the  
button. Move onto the  
Program Menu by pressing the downward  
movement button. When you press the  
button ( ), the program table will appear  
on the screen.  
(
). Pressing the ( ) keys on your  
remote control, select 'S' for cable channels and  
'C' for broadcast received from the antenna;  
select the search tab with the downward  
movement button ( ) and scan the channels  
in ascending order with the Right direction button  
Switching the locations of the program  
channels that have already been  
stored:  
Select the program you would like to  
relocate by pressing the upwards-  
downwards ( )/( ) or Right-left direction  
(
(
) and in descending order with the left direction  
) button. If the channel that is found is of your  
desired quality, select the storing tab. Then store  
it in the memory pressing the button ( ).  
Repeat the same procedure also for the other  
channels by selecting the program number of  
your choice from among the program no. tab.  
buttons ( )/( ). Press the “GREEN”  
colored button. The cursor on the selected  
program will blink.  
the other program to which you would like  
to relocate it with the Upwards-downwards  
(
)/( ) or Right-left direction buttons  
If there is need to perform Manual Fine Tuning  
on the current channel or to name the current  
channel, refer to the related parts.  
( )/( ). Finish the relocation process by  
pressing the “GREEN” colored button. The  
channel in the first program number you  
selected has been moved to your second  
selected program number and the  
channels between both program numbers  
have been shifted to the initially selected  
program number.  
-11-  
Deleting a program that has been  
To name the programs  
The channels names might be  
stored:  
automatically displayed on the programs  
in the table via ATS, yet the channel  
number might also be displayed instead  
of the channel name.  
Select the program you would like to delete  
by pressing the upwards-downwards  
(
)/( ) or Right-left direction buttons  
You can assign your program or  
programs of choice the names that have  
a maximum of five characters. Select  
the program you are about to name by  
pressing the Upwards-downwards  
( )/( ). Press the “blue” colored button.  
The blue buton on the menu will blink for  
approval. You may perform the deletion  
process by pressing the “Blue” button or  
you may abort the deletion process by  
(
)/( ) or Right-left direction buttons  
( )  
pressing the button  
.
( )/( ). Press the “Yellow” button. An  
empty space appears beside the  
channel for which you would like to  
specify name information. Here, choose  
the letter, number or sign that you would  
like using the Up-down direction  
Once you pres the “Blue” button, the  
selected program has been deleted and  
all the following channels have been  
transferred to the previous program  
number.  
(
)/( ) buttons. For the second  
character, press the Right-left button ( )/( ) and  
select the letter, number or sign you would like  
PROGRAM TABLE  
again by the Upwards-downwards ( )/(  
)
P 00  
P 05 TRT1  
P 06 SHOW  
P 07  
P 10  
P 11  
P 12  
P 13  
P 14  
P 01  
buttons. After entering all the characters, store  
the name you have written in the memory by  
pressing the button “Yellow”.  
P02 TRT1  
P03 TRT1  
P04 TRT1  
P 08  
P 09  
To write names for any of the other programs,  
simply repeat the above procedure. In the event  
that you wish to exit the application, simply press  
the ( ) button.  
SKIP  
MOVE  
NAME  
DELETE  
OK  
MENU  
SELECT  
BACK  
If the program is not renamed, then the channel  
number of that program shall be automatically  
displayed.  
Changing the order of a program that  
has been stored in memory:  
The settings on your new television:  
Setting up the Sound Menu  
In the event that you do not wish to come  
across certain programs while navigating  
through the channels using the  
You may perform the sound setting using the “  
VOL+” or “VOL-“ buttons on your television or  
the ( ), ( ) buttons on your remote control.  
You can perform the other sound settings by  
entering the Sound menu. For this purpose,  
press the MENU ( ) button on your remote  
control. Select the sound menu tab ( ) using  
the direction button. You can select in this menu  
whichever you would like for performing a process  
from among the titles.  
(
)/(  
) buttons, then you can use  
that function. Select the program to be  
hidden by pressing the upwards-  
downwards ( )/( ) or Right-left direction  
buttons ( )/( ). Press the “Red”colored  
button. The information name of the  
program to be skipped shall appear in red.  
You may perform this procedure for more  
than one programs. To see the skipped  
program, directly enter the program  
number via the numbering buttons. To  
cancel the program skipping process,  
press once again the “Red” colored button.  
SOUND  
VOLUME  
BALANCE  
SOUND TYPE  
SOUND MODE  
AVL  
MONO  
NORMAL  
OFF  
EQUALIZER  
HEADPHONE  
MENU  
SELECT  
EXIT  
-12-  
Balance: To adjust the sound balance between  
the right and left loudspeakers to the desired  
level, select the balance tab by using the  
downward direction ( ) button. Using the  
right/left direction ( )/( ) buttons, adjust the  
balance.  
Note: You can choose the equalizer options  
directly using the ( ) button on your remote  
control.  
You can exit the Equalizer display by pressing  
the ( ) button at any given time.  
EQUALIZER  
MUSIC  
SPORTS  
CINEMA  
SPEECH  
USER  
Sound type: The program you watch might be  
stereo or in two different languages. Using the  
Right/left direction buttons ( )/( ) in this menu,  
you can select Mono/Stereo or Dual-I/Dual-II  
language.  
120 500 1.5  
5
10  
Hz Hz kHz kHz kHz  
CHANGE  
SELECT  
MENU  
BACK  
Sound mode: If you would like to add some  
depth to the sound of the broadcast you are  
watching, select Spatial effect option with the  
( ) button. For products with the Dolby virtual  
specification, you may select the Dolby Virtual  
option.  
Picture Set up:  
PICTURE  
BRIGHTNESS  
CONTRAST  
COLOUR  
AVL:Television transmitters have different sound  
levels. This can be noticed from the different  
volume levels that can be heard while switching  
from one program to another. Using the right/left  
direction ( )/( ) buttons, switch it to On. The  
AVL (Automatic Volume Limiting) function  
maintains the same sound level as you switch  
from program to program. Select the option Off  
to cancel it.  
Headphones: By connecting the headphone  
unit to your television you can listen to the  
program sounds independently from your  
television. To turn up and down the headphone  
sound level, you can adjust the sound level by  
using the Right-left movement ( )/( ) buttons  
in the Sound tab. When you want to hear the  
sound from the headphone only, just press the  
SHARPNESS  
COLOUR TEMPERATURE NORMAL  
MENU  
SELECT  
EXIT  
Enter the Image menu by pressing  
MENU  
the button ( ) on your remote control.  
Using the upwards/downwards  
direction buttons ( )/( ), you can  
select whichever setting title you would  
like and adjust their levels with the  
Right/left direction ( )/( ) buttons.  
The picture brightness, contrast, color  
intensity and Sharpness levels can all  
be adjusted according to your desire.  
(
) button on your remote control.  
The changes you have made in the  
image settings shall be stored in the  
memory with no need for further  
operation.  
Equalizer: Selecting the Equalizer tab in the  
Sound menu, press the right movement ( )  
button. The equalizer setting function will be  
displayed. Using the right/left movement, up/down  
direction buttons, you may select one of the  
options which enhance the sound effect  
depending on the feature of the program you  
watch, which are exclusively pre-programmed  
and unchangeable for Music, Sports, Movies  
and Speech and in which you can totally adjust  
the personal option.  
DNR: You may reduce the interference  
and noise formed in the image by  
using this feature. Set it to On to  
activate the feature.  
To adjust the user option, select the personal  
option and press the right arrow button. You  
can adjust the frequency levels with the ( )and  
(
) buttons. You can select 120Hz, 500Hz,  
1.5KHz, 5KHz and 10KHz frequency bands with  
( ) and ( ) buttons. Storing the adjustment levels  
in memory press the ( ) button to exit the user  
option. You may exit the equalizer menu by  
pressing again the ( ) button.  
-13-  
Automatic  
Smart picture: You can select one of the non-  
adjustable default settings in the  
memory (Picture Mode) by pressing  
the “ “ button on your remote control.  
Soft, Natural and Rich are default  
values; the user, however represents  
the values you saved in memory.  
Some movie channels might  
broadcast in the 16:9 format. If  
you would like to see this format  
automatically, then select  
AUTOMATIC. In that case, the  
mark AUTO 16:9 appears on  
your screen.  
16:9  
Picture Format: You can visualize the  
broadcast picture you watch in this  
Please use this setting for  
watching the broadcasts in wide  
screen DVD, wide screen  
picture video cassette or 16:9  
format. Since various screen  
formats such as 16:9, 14:9, 20:9  
etc. are used, black stripes  
might be formed on the lower  
and upper parts of the screen.  
option in a format of your choice. You  
can visualize them in the Automatic,  
16:9 14:9, Subtitle, Letterbox and 4:3  
formats. The picture format or 16:9 or  
4:3 formats can be selected in the  
COMP/HDMI/PC modes. Besides, the picture  
will appear in the 16:9 format when the PIP is  
on or while in the positions TXT-TXT/MIX. You  
can perform the same process via the ” “ format  
selection button found on your remote control  
without entering the picture menu. In that case,  
the prompt 16:9 or 4:3 appears in the centre of  
the screen.  
4:3  
Use this setting to watch the  
broadcasts in the 4:3 format.  
Since the use of certain functions in order to change  
the picture sizes for collective display or commercial  
purposes (modifying the height and width etc.) will be  
deemed an infringement of the picture copyrights, penal  
procedure can be carried out as required by the relevant  
laws.  
Tint: When NTSC video is entered via Scart,  
you may make the Colour Tone setting. The tint  
option is not seen in the menu when you have  
not entered such type of a video. When a NTSC  
video is connected via the Scart, this option  
becomes active and it is viewed in the menu.  
Features  
Wide Screen Display  
The TV can be visualized in different formats  
FEATURES  
according to the broadcast made. Pressing (  
)
button, selecet the features Letterbox, Subtitle,  
Automatic, 16:9 ,14:9 and 4:3. Attention  
Please: When the MENU button is pressed, the  
menu will change as it is visualized on the screen.  
This condition ensures that the menus do not  
extend beyond the borders of the visualized  
parts of the screen.  
LANGUAGE  
TIMER  
ENGLISH  
OFF  
CHILD LOCK  
MENU  
SELECT  
EXIT  
14:9  
This is the movie format.  
MENU  
Press the button  
(
)
on your remote  
Letterbox  
control. Select the features menu tab  
using the direction button ( ). You can  
select from among the titles in this menu  
for which you would like to perform a  
process using the Upwards/Downwards  
While watching a ‘’Letter box  
formatted’’ film / video cassette,  
this setting will eliminate or  
minimize the black stripes on  
the background by zooming in  
the picture and without diffusing  
it.  
direction  
(
)/(  
)
buttons.  
Subtitle  
If the subtitles are transmitted  
in the ‘’letterbox formatted’’  
broadcast, then this setting will  
push the picture upwards in  
order to ensure the entire written  
text to be visualized.  
-14-  
Menu language: Selecting the Menu  
language tab, press the right movement  
Note: The Zoom mode does not operate while  
there is a PIP picture in the screen and in the  
COMP/HDMI/PC inputs. The Zoom mode is  
aborted once the program has been switched,  
Teletext is entered or PIP is activated.  
OK/  
FREEZE  
(
)
button. The menu languages shall  
appear in the menu in order, select your  
desired language using the Right-left  
movement buttons ( )/( ). Press the  
(
)
FREEZE: You may freeze the program picture  
button. All the setting displays of your  
television will be visualized in the  
language that you selected.  
you are watching thanks to this feature.  
For this purpose, press the ( ) button  
OK/  
FREEZE  
on your remote control while there are  
no menus on the screen. The program  
picture will freeze until the same button  
is pressed for the second time.  
Child lock : If this feature is turned On,  
the program that is found is locked, the  
image and sound is off, the locked  
program is skipped while zapping  
Note: The Freeze feature also freezes PIP  
screen while there is a PIP picture on the screen.  
programs with the (  
)/(  
) buttons.  
Using the PIP (Picture in Picture) feature;  
Timer: Your television deploys the feature of  
being able to be turned off at the end of a period  
of time that you detected and to be turned on  
again after a time you designated. To ensure  
that your television turn off at the end of your  
desired time period, select the timer tab. Select  
your desired period of time with the numerical  
buttons. Determine the time for turning on in the  
same way. Enter in the program no. tab the  
channel from which you would like the TV to be  
turned on. At the end of the time you specified,  
your television will automatically switch to stand-  
by. It switches to the selected program at the  
end of that time while the TV is on.  
Press the ( ) button on your remote  
control. The PIP screen appears on the  
PIP SEL.  
screen. According to the selected source,  
a window will be opened inside the main  
picture and a sub-screen will be  
displayed.  
You can return to PAP mode by pressing the  
button ( ) again. You can return to the normal  
mode by pressing the ( ) button in the PAP  
mode.  
TIMER  
CLOCK  
13:47  
- - : --  
- - : --  
P 01  
ON TIME  
To change the source on the PIP screen in the  
PIP or PAP mode, you may use the up/down  
OFF TIME  
PROGRAM NO  
(
)/( ) direction buttons.  
Note1: All the sources can be selected in the  
PIP while there is TV or AV on the screen.  
However, only TV/AV can be watched while there  
is COMP/HDMI/PC on the main screen.  
Note2: The PIP source information available in  
the TV/AV mode and the PIP source information  
available in the COMP/HDMI/PC mode are the  
same. Hence, the PIP source also changes once  
the main screen has been switched from TV/AV  
to COMP/HDMI/PC.  
0-9  
MENU  
BACK  
ZOOM: To activate this option, press the button  
(
) on your remote control while  
ZOOM  
watching a program picture. During the  
zooming process, the image is zoomed  
out in three stages in a centre-oriented  
way. To move up/down ( )/( ) or  
right/left ( )/( ) on the picture in this  
position, press the ( ) button on your  
remote control. Then, press the key for  
the direction in which you would like to  
move. In the event that you wish to exit  
the Zoom mode for any reason, simply  
press the ( ) button. By pressing the  
( ) button, you may return to the normal  
mode after the three stages.  
PIP Position:  
With this option, you can change the  
position in which the PIP window is  
PIP POS.  
visualized on the screen. For this  
purpose, you may change the PIP  
Position by pressing the Right/Left  
direction ( )/( ) buttons after pressing  
the  
button while there is a PIP picture on  
OK/  
FREEZE  
the screen.  
MENU  
-15-  
In order to switch your television to the teletext  
broadcast, please press the ( ) button in a  
program that has teletext broadcast. To switch  
back to the television broadcast, press the same  
button.  
Once you have switched to the teletext broadcast,  
the index page will initially be visualized (Page  
100). In this page, the titles of the topics in that  
teletext broadcast and the initial page numbers  
do appear.  
PIP Dimension:  
With this option, you may zoom in and  
zoom out the PIP window size. For this  
purpose, you may change the PIP size  
PIP SIZE  
by pressing the ( ) button while there  
is a PIP picture on the screen.  
Page selection  
PAT Mode:  
While watching a broadcast on your  
television, you can enter the PAT (Picture  
and teletext) mode pressing the (  
button on your remote control. Thanks  
to this feature, you can also follow the  
teletext broadcast if there is also a teletext  
broadcast in the program that is being watched.  
To abort this mode, press again the ( ) button  
found on your remote control.  
PAT  
To be able to view the page you would  
like on the screen, type in the number  
0
)
of that page using the numerical keys.  
You can see the number you have  
9
entered on the left side of the upper  
title tab.  
When you would like to skip the pages  
one by one, you can go to the next  
page pressing the ( ) key and to the  
previous page pressing the ( ) key.  
Flickering of the picture can occur in PIP, PAP  
and PAT modes.  
i
To return to the Index page, press the  
button ( ).  
Teletext viewing button (MIX) in the TV  
picture  
By pressing this button, you can watch  
the teletext information and the TV  
TEXT/  
MIX  
broadcast on top of one another and  
Teletext  
together. In this way, the channel’s  
teletext information service can be  
Being one of the most prominent services of  
broadcasting today, Teletext renders using the  
TV more fruitful.  
viewed while the channel’s regular  
TEXT/  
MIX  
broadcast is carried on. To return to the  
Teletext broadcast, press the key ( ),  
to return to the TV broadcast, pres the  
key ( ).  
Teletexts means in short the transmission of  
various updated information along with the TV  
broadcast in the form of texts and graphics.  
To be able to receive a quality teletext broadcast,  
a good antenna system and a broadcast that is  
not weak, with no reflections and interference  
from other channels are required. Even in a very  
clear reception, it is normal for some characters  
or tabs to be lost. Such conditions will  
automatically be improved in a short time under  
normal circumstances.  
Page enlargement button (DOUBLE)  
Using this button, you can watch the top  
half of the teletext page in the enlarged  
format. To be able to view the bottom  
half of the page as enlarged, press again  
the same button. Once you press the ( ) button  
for the third time, the page will be restored to its  
normal size.  
Accession to the Teletext mode  
Stop Button (HOLD)  
In a channel that does not have the  
Some information is laid out by the  
broadcasting agency in multiple pages  
and it is broadcast in the automatic cycle  
mode. For example, on a text of four  
pages, the pages are indicated  
Teletext feature, if you are to press the  
TEXT/  
MIX  
(
)
button, the message “NO  
TELETEXT UNAVAILABLE” will appear  
on the screen.  
-16-  
with the figures 01, 02,03 and 04 on the bottom  
of the page. To view one of these pages longer,  
press the ( ) button. When you press the same  
button again, the cycle continues.  
Note: The fastext feature is not available for all  
the teletexts broadcasts. It is determined by the  
broadcasting agency whether it is to be broadcast  
or not.  
Sub page button (SUB)  
If any agency that performs teletext  
broadcasting broadcasts the sub pages  
of any teletext page, the page numbers  
starting with 01 appear on the bottom  
of the screen. Using the ( ) button, you  
can switch to the sub pages. In that  
case, the tab 'sub page’ is visualized  
External equipment  
connection:  
You can connect to your television many compatible  
sound and picture devices.  
5
AV inputs: Press the ( ) button on the RC. The  
Source menu will be visualized on the screen in  
which the access mode can be selected. Here,  
you can select whichever input you would like.  
inside "red -" and "green +" frames. You can  
select the sub pages pressing the "RED" and  
"GREEN" buttons. You can abort the same page  
by pressing again the same button.  
TV: While in the AV modes, move onto this option  
and press the ( ) button for switching to the TV  
mode.  
UPDATE Button  
This button is designed so that you do  
not wait for searching the page and  
AV1: To watch the picture of the broadcast device  
connected to the Scart1, move onto this option  
switch to the television picture while  
looking for your desired page in the  
teletext broadcast. You may switch to the  
television picture by pressing the ( ) button  
while Teletext is looking for your desired page.  
Once the page you would like has been found,  
the number of that page appears on the screen.  
and press the button ( ). (You can watch via  
this Scart if there is a RGB output from the device  
with which you made a connection).  
AV2: To watch the picture of the broadcast device  
connected to the Scart2, move onto this option  
and press the button ( ). (You can watch via  
this Scart if there is a RGB output from the device  
with which you made a connection).  
Question - answer button (REVEAL)  
Sometimes, a teletext page contains a  
?
hidden answer such as a game or a  
S-VHS: To watch the picture of the broadcast  
device connected using the S-Video input, move  
onto this option and press the button ( ).  
riddle. To disclose the hidden answer,  
press the button ( ).  
Clock  
AV3: To watch the picture of the broadcast device  
connected using the RCA (Cinch) input, move  
onto this option and press the button ( ).  
The Clock function of the ( ) button;  
when you would like to find out the time  
while watching any television channels,  
pres the button ( ). In that case, a clock  
will appear on the up right corner of the screen.  
You can erase the time information off the screen  
by pressing the same button.  
PC: To be able to watch the monitor image in  
the PC mode, move onto this option and press  
the ( ) button.  
HDMI: To be able to watch the image when a  
connection is made via the HDMI socket, this  
option must be selected.  
Fastext  
The colored buttons on the remote control device  
are for the fastext feature.  
YPBPBR (Component Input): To be able to  
watch the image when a connection is made via  
the this socket, this option must be selected.  
When you select any page, the titles on various  
subjects might be visualized on the screen in  
four different colors or inside colored frames  
(red, green, yellow and blue).  
By pressing the button pertaining to the relevant  
color on the remote control, you can access the  
subject of your choice without waiting.  
-17-  
Headphones  
High definition - HD ready  
Your television can receive high-  
The headphones must have an impedance  
of between 8 and 32 ohms and have a 3.5  
mm stereo jack plug. Plug the headphone  
jack into the headphone socket of the TV.  
definition signals (HDTV) You can  
connect the input sources (HDTV  
set-top box or HDTV DVD player)  
to the (HDMI) socket (digital HDTV signal).  
This ensures that you can view digital HDTV  
programmes, even if they are copy-protected  
(HDCP High-Definition Copy Protection).  
SCART SOCKET  
External equipment connection:  
VCR/VCD  
In order to be able to connect an external  
device, your TV is equipped with 7 inputs  
including antenna input as follows:  
DVD/PVR  
1-Antenna input  
2-VGA input  
3-HDMI input  
4-YUV component input  
5-S-VHS input  
6-SCART input  
7-RCA input  
DECODER  
You can connect your external device  
supporting the suitable inputs to your TV via  
these inputs.  
CAMCORDER  
By pressing the ( ) button on your  
AV  
remote control, select the input AV1,  
AV2 to which you connected your  
device.  
VIDEO GAME  
INPUT  
Your LCD television can also be used as a PC  
monitor since it also enables VGA inputs at the  
same time.  
PC Connection:  
Connect the D-Sub15 connector to the PC-IN  
input behind your television using a suitable  
cable (not supplied with your television).  
Using again a suitable cable, you can also listen  
to the sound from your PC by connecting the  
sound output of your PC to the PC AUDIO-IN  
input behind your television.  
R
L
VIDEO  
Transition to the PC mode  
For your LCD-TV to pass to the monitor (PC)  
mode, press the ( ) on your remote control.  
To switch back from the PC mode to the TV  
mode, use the ( ) button on your remote control.  
-18-  
Switching to the HDMI mode  
PC Accession Setting  
Connect it to the HDMI input behind your TV  
using connector located on your PC or your  
digital video-transmission device and a suitable  
cable (not supplied with the TV).  
In the PC mode, enter the picture setting menu  
by pressing either the ( ) or Green ( ) button.  
In order to make the necessary adjustments in  
this menu, you can use the Right-left, Up-down  
Note1: To be able to watch an image in the  
HDMI mode, it is necessary that your computer  
be equipped with a HDMI supported screen card.  
direction ( )/( ) ( )/( ) buttons on your remote  
control.  
Here, you can not only make the brightness and  
contrast settings, you can also make the following  
settings related to the monitor.  
You may see on the screen the resolution  
information by pressing the “ ” button.  
If a DVD source is connected to the HDMI input  
via an appropriate cable connector, the sound  
in the PC AUDIO IN is emitted out of the  
loudspeaker.  
X. Position: Horizontal position setting  
Y. Position: Vertical position setting  
Clock Frequency: This is the pixel clock  
frequency. User can norrow down or enlarge the  
display by selecting a desired value.  
Note2: To connect a RGB-supported external  
device to your television, it is necessary that you  
use a RGB supported Scart cable. If your external  
device is supported in that case, you can set the  
output as RGB.  
Phase: Using the right/left direction ( )/(  
)
keys, you can ensure that the colors and shapes  
are exactly consolidated on the PC image.  
Note3: It is necessary that the decoder device  
be equipped with a tuner so that you can connect  
a decoder through a RCA connection.  
Picture Format: You can select the PC image  
in the 16:9, 4:3, Subtitle, Letterbox, Panorama  
or Automatic formats.  
HDCP support: Your set supports HDCP feature.  
To use this feature, you must set up a connection  
to your TV set’s HDMI video port and select  
HDMI by pressing the AV key on your remote.  
You can perform the same process via the format  
selection button found on your remote control  
without entering the picture menu.  
Automatic configuration: The most  
suitable geometric settings in accordance with  
the entry mode are configured by this function.  
For this application, simply select the Automatic  
Position tab and press the ( ) button.  
You can make the ZOOM and PIP processes in  
the PC mode as described in the above parts.You  
can adjust the sound of the source you have  
connected to the Audio-In input behind yout TV  
using the buttons ( )/( ), you can make it ( ).  
Connecting a Video recorder device and a digital satellite receiver  
ANT IN  
Scart 1 TV IN/OUT  
Scart 2 AUXIN  
Scart Socket  
ANT OUT  
Antenna  
socket  
DIGITAL SATALLITE RECEIVER  
VIDEO RECORDER  
BEHIND THE TELEVISION  
-19-  
Help and tips  
The television does not function  
Make sure that the power cable of the television  
is connected to the network and the power on  
-off switch is turned on.  
No sound  
Temporary sound mute might be on. Try  
pressing the mute button.  
Is the sound turned down?  
A headphone might have been connected  
to the television.  
Low picture quality  
Is the antenna cable connected?  
If you are using a satellite antenna, has the  
antenna been adjusted to receive broadcast  
in the best way?  
The remote control does not function  
Try replacing the batteries.  
Be careful that there are no obstructions  
between the remote control and television.  
Be careful that the antenna is far from devices  
that emit electromagnetic waves. (Neon  
lights, loudspeakers etc.)  
Try changing the direction of the external  
antenna. High buildings and mountains might  
lead to the appearance of a faded picture or  
a double picture.  
If your device does not work despite all of  
these  
If your television does not work properly even  
though you tried the above mentioned solutions,  
try turning it on and off again.  
If you cannot start your television even though  
you have applied all the written methods, refer  
to the dealer or authorized service from where  
you purchased the product.  
Never attempt to repair yourself a non-operating  
device.  
The picture quality might be affected when  
two external devices are connected. Try  
disconnecting one of the devices.  
Try making a fine tuning.  
No picture  
Is the antenna connected correctly?  
Is there any damage on the antenna cable?  
Are the plugs on the antenna cable  
connected correctly?  
Are you sure that you have pressed the  
correct key on the remote control?  
Symptoms  
No picture and sound  
No sound, picture available  
No picture, sound available  
Low quality picture  
Foggy picture  
Double picture  
Line on the picture  
Distorted picture  
Distorted broadcast on some channels  
Horizontal lines exist  
Vertical fluttering in the picture  
Weak color  
No color  
The remote control does not function  
TV does not respond to the commands  
Fluttering in the teletext  
-20-  
Technical specifications chart  
SCREEN SIZE  
Panel type  
32”  
32”, 16:9 Active  
matrix TFT  
Sound output  
2x7 W Min.  
Power  
145 W  
1,5 W  
consumption  
Stand-by power  
consumption  
Teletext page  
12  
General technical specifications  
Power supply  
AC:............................................................................230V 50 Hz  
Program memory: ..................................................100  
RF Antenna input: ..................................................75 Ohm (Co-axial)  
Loudspeaker impedance: .....................................8 Ohm  
Sound systems: ......................................................Mono/Stereo/Nicam  
Batteries...................................................................2xUM - 4, IEC R03 or AAA 1.5V  
Received channels: ................................................VHF (Band I channel 2-4)  
..................................................................................VHF (Band III channel 5-12)  
..................................................................................UHF (Channel 21-69)  
..................................................................................Cable TV (S1-S20/S21-S41)  
Received broadcasting systems................................PAL BG  
PAL SECAM BG  
PAL SECAM BG DK/DK’  
PAL SECAM BG LL’  
PAL I  
Note: Your television has been manufactured in accordance with your country by selecting from  
among the above mentioned broadcasting systems and this system cannot be changed by the user  
except the case described below: In countries where BG/DK and BG/LL’ broadcasts are done (BG  
or DK / BG and LL’). For further information, see the settings part about your television.  
Environmental note  
This product has been made from high-quality parts and materials which can be re-used and recycled.  
Therefore, do not throw the product away with normal household waste at the end of its life. Take it  
to a collection point for devices. This is indicated by this symbol on the product, in the operating  
manual and on the packaging.  
Please find out about collection points operated by your local authority.  
Help protect the environment by recycling used products.  
Note: This is a Class A product. During operation the device can cause radio interference. In this case  
the user may have to remedy this. Please contact your specialist dealer.  
-21-  
ATW.801  

HP Hewlett Packard MX50 User Manual
Hitachi C1459FN User Manual
Hitachi 35UX60B, 35TX10B User Manual
EVGA Hydro Copper GTX 480 User Manual
Electrolux ICON E36EC65ESS User Manual
Electrolux CSIG 317 User Manual
Dell Computer Monitor U2211H User Manual
Black Decker CTO800 User Manual
BenQ FP73G User Manual
Asus Z87M Plus Manual Z87MPLUS User Manual