Coleman Camping Equipment 2000000437 User Manual

TM  
3
HELIOS X  
MODEL 2000000437  
Before you begin  
Parts and Components  
Description  
Read all instructions before set up.  
• Select a level campsite clear of rocks, branches, and other hard  
or sharp objects, to install your tent.  
WARNING: Keep clear of overhead power lines.  
• Do not set up your tent under trees.  
• For best results in windy conditions, position end of tent into  
the wind.  
• Enlist the help of at least one other person to assist you when  
it is time to assemble the tent.  
Part Number  
5010000521  
5010000523  
5010000522  
5010000525  
Main Poles, Red (2)  
Cross Poles, Silver (2)  
Vestibule Poles, Gold (2)  
Rainfly, Orange  
To Set Up Tent  
Fig. 1  
Red Trim on Sleeve  
1. Unfold tent and spread out on a  
clean, level surface with the doors  
facing the desired direction. (Fig. 1)  
2. Stretch corners of tent until floor is  
taut then hammer stakes through  
loops on web straps to secure.  
(Fig. 1A )  
1B  
Cutout in Red Sleeve  
Silver  
Cross Pole  
Red, Shock-corded  
Main Poles  
Door  
Door  
3. Assemble two red main poles and  
two silver cross poles by interlocking  
the shock-corded poles.  
4. Insert red main poles through  
sleeves with red trim in top of tent  
forming an “X” as shown. (Fig. 1)  
5. Insert silver cross poles through  
sleeves with silver trim in top of tent.  
NOTE: Make sure the silver  
Silver Trim on Sleeve  
Silver, Shock-corded  
Cross Poles  
1A  
poles pass through the cutouts in the  
red trimmed sleeves and under the  
red main poles. (Fig. 1 & 1B)  
6. Insert one end of red main pole  
into first grommet in web straps  
at front corner of tent.  
(Fig. 2 & 2A)  
7. Go to opposite end of red main  
pole and gradually apply pressure  
to the pole forming an arch.  
Insert the end of pole into first  
grommet at the back corner of  
tent. (Fig. 2 & 2A)  
2B  
Door  
8. Repeat for second red main pole.  
9. Insert one end of silver cross  
pole into grommet in web strap  
at side of tent. (Fig. 2 & 2B)  
10. Go to opposite end of silver  
cross pole and gradually apply  
Stake through  
loop  
pressure to the pole forming an  
arch. Insert the end of pole into  
the grommet at other side of  
tent. (Fig. 2)  
2C  
Stake through  
loop  
Red Main  
Pole in first  
grommet  
Fig. 2  
11. Repeat for second silver cross  
pole forming an “X”. (Fig.2)  
2A  
12. Attach frame clips along edges of tent to red and silver poles. (Fig. 2 & 2B)  
13. Clip plastic hooks, located on both sides of tent, to secure silver cross poles together as shown. (Fig. 2 & 2C)  
14. Stretch sides of tent until floor is taut then hammer stakes through loops on web straps to secure.  
(continued on other side)  
 

Conair Carpet Cleaner GS33 User Manual
Craftsman Sander 17227673 User Manual
Curtis Digital Photo Frame DPF768 User Manual
Earthquake Sound Speaker Kompressor User Manual
Electro Voice Microphone RE200 User Manual
Estate Range TEP315VQ User Manual
Euro Pro Convection Oven TO292H User Manual
Faber Ventilation Hood INCA SMART User Manual
GE Air Conditioner AZ22E09DP User Manual
Global Machinery Company Glue Gun DEC005GG User Manual