AREA
250-1000W
CML SQUARE
MH/HPS
ARCHITECTURAL AREA LUMINAIRE
A
B
C
D
E
Fixture
A
B
C
D
E
CML (in.)
14
356
3 1/2
89
19 1/4
489
22
559
6 or 14
152 or 356
S
(mm)
NOTE: In all flat glass configurations only.
STREETWORKS™
IP55 RATED
HOUSING
ORDERING INFORMATION
SAMPLE NUMBER: CML40MN3VSGBKL
Formed aluminum housing
has interior-welded seams for
structural integrity and is finished
in premium TGIC polyester powder
coat paint. U.L. listed and CSA
certified for wet locations. IP55
rated.
PRODUCT
FAMILY1
CML=CML
LAMP
WATTAGE2 M=Metal Halide
25=250W
LAMP TYPE
VOLTAGE 5
2=120V
DISTRIBUTION
LENS TYPE
COLORS
OPTIONS +
1F=Type I MCO (Horizontal)
2F=Type II MCO (Horizontal)
FG=Flat Glass (add as suffix/ ACCESSORIES
S=High Pressure 0=208V
SG=Sag Glass must specify) 9
(See Below)
Square 40=400W
Sodium
4=240V
7=277V
8=480V
9=347V
2S=Type II Segmented (Horizontal) 6
3F=Type III MCO (Horizontal)
WH=White
75=750W3
BK=Black
AP=Grey
BZ=Bronze
DP=Dark Platinum
GM=Graphite Metallic
91=1000W4
3S=Type III Segmented (Horizontal) 6
4S=Type IV Segmented (Horizontal) 6
BALLAST TRAY
Ballast tray is securely mounted
and inter-locked to housing interior
for cooler operation. Tray features
toolless removal capability for ease
of maintenance and replacement.
W=Multi-Tap wired 120V 5S=Type V Segmented (Horizontal) 6
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
FT=Forward Throw (Horizontal)
AR=Area Round (Vertical)
AS=Area Square (Vertical)
3V=Type III (Vertical)
RW=Rectangular Wide (Vertical) 7
SL=Spill Light Eliminator (Horizontal) 8
BALLAST
Long-life core and coil ballast.
REFLECTOR
Standard rotatable and
OPTIONS + ACCESSORIES [ Must be listed in the order shown and separated by a dash]
interchangeable optics allow for an
easy field retrofit with respective
sag and flat glass doors for areas
with restrictive lighting ordinances
such as “Dark Sky”.
OPTIONS (add as suffix)
ACCESSORIES (order separately. add color as suffix)
MA1004-XX=14" Arm for Square Pole 12
MA1005-XX=6" Arm for Square Pole
MA1017-XX=Single-arm Tenon Adapter for
2 3/8" O.D. Tenon
MA1018-XX=2 @ 180° Tenon Adapter for
2 3/8" O.D. Tenon
MA1019-XX=3 @ 120° Tenon Adapter for
2 3/8" O.D. Tenon
1=Single Fuse (120, 277, or 347V)
2=Double Fuse(208, 240, or 480V)
EM=Quartz Restrike with Delay
(Also Strikes at Cold Start)
MA1006-XX=Direct Mount Kit for Square Pole
MA1007-XX=14" Arm for Round Pole 12
DOOR
4=NEMA Twistlock Photocontrol Receptacle MA1008-XX=6" Arm for Round Pole
Formed aluminum door has
heavy-duty hinges, captive retaining
screws and is finished in premium
TGIC polyester powder coat paint.
Q=Quartz Restrike (Hot Restrike Only)
MA1009-XX=Direct Mount Kit for Round Pole
MA1010-XX=Single-arm Tenon Adapter for
3 1/2" O.D. Tenon
MA1011-XX=2 @ 180° Tenon Adapter for
3 1/2" O.D. Tenon
MA1012-XX=3 @ 120° Tenon Adapter for
3 1/2" O.D. Tenon
MA1013-XX=4 @ 90° Tenon Adapter for
3 1/2" O.D. Tenon
MA1014-XX=2 @ 90° Tenon Adapter for
3 1/2" O.D. Tenon
MA1015-XX=2 @ 120° Tenon Adapter for
3 1/2" O.D. Tenon
MA1029-XX=Wall Mount Bracket with 10" Arm
(Specify color)
MA1045-XX=4 @ 90° Tenon Adapter for
2 3/8" O.D. Tenon
MA1048-XX=2 @ 90° Tenon Adapter for
2 3/8" O.D. Tenon
MA1049-XX=3 @ 90° Tenon Adapter for
2 3/8" O.D. Tenon
EHS-XX=External House Side Shield
OA1016=Photocontrol–Multi-Tap
OA1027=Photocontrol–480V
OA1201=Photoelectric Control, 347V NEMA Type
HS=House Side Shield 10
EHS=External House Side Shield
AIR=Arm Included for Round Pole11
AIS=Arm Included for Square Pole11
VS=Vandal Shield
(Arm Mount Only, 400W Maximum)
L=Lamp Included
LENS
Convex tempered glass lens or flat
glass.
GASKET
Standard one-piece extruded EPDM
gasket ensures a bug proof
installation and is backed by IP55
rating.
MA1016-XX=3 @ 90° Tenon Adapter for
3 1/2" O.D. Tenon
OPTIONAL COLORS [ Other finish colors available. Consult your Cooper Lighting representative]
WH
BK
AP
BZ
DP
GM
White
Black
Grey
Bronze
Dark Platinum
Graphite Metallic
NOTES: 1 Arm not included. See options and accessories. 2 Mogul-base lamp socket. 3 750W Pulse Start for vertical mount only. 4 Requires reduced envelope BT-37 lamp on Metal Halide or ED-37 on HPS. 5 Standard with CWA
ballast. 6 Maximum wattage on segmented optical distributions is 400W. 400W Metal Halide lamp must use reduced envelope ED-28 lamp. 7 RW optic not available with flat glass. 8 Must use reduced envelope lamp.
Not available in 1000W HPS. 9 Other finish colors available, including a full line of RAL color matches. Consult your Cooper Lighting Representative. 10 House side shields available on 2F, 3F, FT, 2S, 3S, 4S distributions
only, and all vertically lamped optics when specified with sag lens. 11 Provided with 11 1/2" arm. 12 Required when mounting fixtures at 90° increments (Arm EPA 0.62).
SHIPPING DATA
Approximate Net Weight:
79 lbs. (36 kgs.)
86 STREETWORKS Outdoor Lighting Solutions
Cooper Lighting
|