Cypress Computer Drive CY4632 User Manual

Getting Started with the CY4632 Reference Design Kit  
Contents  
Introduction  
Welcome to the CY4632 WirelessUSB LS Keyboard/Mouse/Bridge Reference Design Kit! This kit includes  
everything you will need to make a wireless keyboard and mouse. Cypress’ new 2.4GHz WirelessUSB LS radio  
system on a chip products have many powerful features that allow creation of never before seen radio  
applications. Agilent’s ADNS-2030 Low Power Optical Mouse Sensor is particularly optimized for wireless mouse  
applications.  
This document is aimed at providing an overview of the kit and a roadmap to guide you to the pieces of  
information that will help you the most.  
The CY4632 Reference Design Kit utilizes PSoC controllers for the RDK Keyboard (CY8C27643-24PVXI) and the  
RDK Mouse (CY8C27443-24PVXI). Please contact your local sales representative for more information on these  
PSoC controllers. For more information on Agilent’s ADNS-2030 Low Power Optical Mouse Sensor, please  
contact your local Agilent sales representative.  
Review of Kit Components  
To make sure that you have everything you should, here is a list of the components that are physically included in  
the kit, along with a brief description:  
Documents  
A few items are included in hardcopy for convenience. Descriptions of these documents (except the  
Welcome Letter) are covered in the Documentation Index section.  
Welcome Letter  
CY4632 Getting Started (this guide)  
CY4632 SW License Agreement  
CYWUSB6934 WirelessUSB LS Datasheet  
CY7C63723 enCoRe Datasheet  
CY8C27443/643 PSoC Datasheet  
Agilent ADNS-2030 Low Power Optical Mouse Sensor Datasheet  
CY4632 RDK Release Notes  
CY4632 RDK Errata  
CY4632 Keyboard FW User’s Guide  
 
 
Getting Started with the CY4632 Reference Design Kit  
Press the bind button on the bridge and then the bind button on the keyboard. The keyboard bind button is  
located on the bottom of the keyboard under the right side foot. Please refer to the CY4632 Keyboard FW User’s  
Guide for more details if you have trouble locating the button. This will bind the keyboard to the bridge. At this  
point, you should be able to type characters with your wireless keyboard.  
Once again, press the bind button on the bridge and then the bind button on the mouse. The mouse bind button is  
located on the bottom of the mouse. Please refer to the CY4632 Mouse FW User’s Guide for more details if you  
have trouble locating the button. This will bind the mouse to the bridge. Your mouse should be fully functional at  
this point.  
WirelessUSB LS Keyboard/Mouse RDK CD-ROM  
The CD-ROM contains electronic versions of the documents, the hardware design files for the PCBs (Gerbers,  
BOMs, schematics and Orcad files), battery level and signal strength application, and the source code and binary  
files for the bridge, keyboard and mouse.  
Directory Structure  
This list goes over the higher-level directory structures and does not completely explore the lower level directories  
or attempt to describe the location of every file.  
|-- Docs  
|
|
“Docs” contains the kit documentation. All items are in Adobe Acrobat  
Portable Document Format (.pdf). If you need the free Acrobat Reader go  
to Adobe’s website at www.adobe.com.  
|
|
Descriptions of these documents are contained in the Documentation Index  
immediately following this section.  
|
|-- Hardware  
“Hardware” contains the design files used in development of the boards in  
the kit. There is a subdirectory for each board. Within those directories you  
will find .pdf schematics, Bill of Materials, Orcad source files, and Gerber  
databases. Designs utilizing the QFN radio package are recommended.  
|
|
|
|
|
|
|
|-- QFN Keyboard  
|-- QFN Mouse  
|-- QFN Microbridge  
|-- SOIC Keyboard  
|-- SOIC Mouse  
|-- SOIC Bridge  
|-- Firmware  
“Firmware” contains the firmware related files.  
|
|
|
|
|
|
|-- Source Code  
“Source Code” contains the source files for each of the RDK boards. The  
“RDK Keyboard” and “RDK Mouse” directories include the application  
source files and the necessary PSoC Designer directories/files. The “RDK  
Bridge” directory includes the enCoRe™ source files.  
|-- RDK Keyboard  
|-- RDK Bridge  
|-- RDK Mouse  
|-- Binaries  
“Binaries” contains a binary image of the firmware for each RDK board.  
|-- Software  
“Software” contains the battery level and signal strength application files. A  
“readme.txt” file describes the steps to install/uninstall the application.  
“Source Code” will contain the battery level and signal strength application  
source fines in the final kit release.  
“Binaries” contains the battery level and signal strength application  
executable(s).  
|
|
|
|
|
|
|-- Source Code  
|
|-- Binaries  
Documentation Index  
A brief description of the documents is given below:  
3
 
 
Getting Started with the CY4632 Reference Design Kit  
Getting Started with the CY4632 Reference Design Kit  
Location: Printed and in the top-level directory  
File Name: CY4632 Getting Started.pdf  
Description: Introduction to the development kit contents - this document.  
Cypress Software License Agreement  
Location: Printed and in Docs directory  
File Name: CY4632 SW License Agreement.pdf  
Description: This document provides the standard Cypress license for use of materials supplied in the  
development kit.  
CYWUSB6934 WirelessUSB LS Datasheet  
Location: Printed and in the Docs directory  
File Name: CYWUSB6934 WirelessUSB LS Datasheet.pdf  
Description: This is the document that describes the WirelessUSB LS Radio. The datasheet is focused primarily  
on the hardware aspects of the design, but do cover a general overview of the part. Cypress always maintains the  
latest documents on its website for download, so it’s worth a periodic check during the design process to see if  
there are updated datasheets available. Go to www.cypress.com and look under “WirelessUSB”.  
CY7C63723 enCoRe Datasheet  
Location: Docs directory  
File Name: CY7C63723 enCoRe Datasheet.pdf  
Description: This is the datasheet for the CY7C63722/23/43 enCoRe™ USB Combination Low-Speed USB &  
PS/2 Peripheral Controller.  
CY8C27443/643 PSoC Datasheet  
Location: Docs directory  
File Name: CY8C27443 PSoC Datasheet.pdf  
Description: This is the datasheet for the CY8C27143/243/443/543/643 PSoC™ Controller devices.  
Agilent’s ADNS-2030 Low Power Optical Mouse Sensor Datasheet  
Location: Docs directory  
File Name: ADNS-2030 Datasheet.pdf  
Description: This is the datasheet for the Agilent ADNS-2030 Low Power Optical Mouse Sensor.  
CY4632 Reference Design Kit Release Notes  
Location: Printed and in the Docs directory  
File Name: CY4632 RDK Release Notes.pdf  
Description: This Release Notes document focuses explicitly on the development kit materials. It covers any last  
minute information that relates to deviations from functionality explained in the documentation.  
CY4632 Reference Design Kit Errata  
Location: Printed and in the Docs directory  
File Name: CY4632 RDK Errata.pdf  
Description: This document covers any known RDK errata.  
CY4632 Keyboard Firmware User's Manual  
Location: Docs directory  
File Name: CY4632 Keyboard FW User’s Guide.pdf  
Description: This is a detailed reference that describes the RDK Keyboard firmware.  
4
 
Getting Started with the CY4632 Reference Design Kit  
CY4632 Bridge Firmware User's Manual  
Location: Docs directory  
File Name: CY4632 Bridge FW User’s Guide.pdf  
Description: This is a detailed reference that describes the RDK Bridge firmware.  
CY4632 Mouse Firmware User's Manual  
Location: Docs directory  
File Name: CY4632 Mouse FW User’s Guide.pdf  
Description: This is a detailed reference that describes the RDK Mouse firmware.  
CY4632 WirelessUSB Software User's Manual  
Location: Docs directory  
File Name: CY4632 WirelessUSB SW User’s Guide.pdf  
Description: This document describes the software source code modules used to communicate with the  
WirelessUSB LS RDK Bridge to obtain current radio parameters and battery level information for the attached  
WirelessUSB devices (RDK Keyboard and RDK Mouse).  
CY4632 Protocol Library  
Location: Docs directory  
File Name: CY4632 Protocol Library.pdf  
Description: This is a detailed reference that describes the KBM RDK Protocol Library.  
WirelessUSB LS Theory of Operation  
Location: Docs directory  
File Name: WirelessUSB Theory of Operation.pdf  
Description: This document describes the theory of operation with the LS radio.  
WirelessUSB LS 1-Way HID Networks  
Location: Docs directory  
File Name: WirelessUSB 1-Way HID Networks.pdf  
Description: This document describes 1-Way HID Networks with the LS radio.  
Preliminary WirelessUSB LS 2-Way HID Systems  
Location: Docs directory  
File Name: Preliminary WirelessUSB LS 2-Way HID Systems.pdf  
Description: This document describes 2-Way HID Systems with the LS radio.  
WirelessUSB Calculating Battery Life  
Location: Docs directory  
File Name: WirelessUSB Calculating Battery Life.pdf  
Description: This document describes how to calculate projected battery life for LS HID designs.  
WirelessUSB LS Interference Avoidance  
Location: Docs directory  
File Name: WirelessUSB LS Interference Avoidance.pdf  
Description: This document describes how WirelessUSB LS technology avoids the interference caused by  
narrowband signals.  
WirelessUSB Managing Power  
Location: Docs directory  
5
 
Getting Started with the CY4632 Reference Design Kit  
File Name: WirelessUSB Managing Power.pdf  
Description: This document describes how WirelessUSB technology helps minimize power consumption and how  
system design considerations play a key role in maximizing battery life.  
WirelessUSB Maximizing Range  
Location: Docs directory  
File Name: WirelessUSB Maximizing Range.pdf  
Description: This document describes three main areas of focus for maximizing range in systems that utilize  
WirelessUSB LS technology.  
WirelessUSB LS Radio Module FCC Testing and Verification  
Location: Docs directory  
File Name: WirelessUSB LS Radio Module FCC Testing.pdf  
Description: This document gives a brief overview of the legal issues governing the manufacture and sale of  
wireless products intended for unlicensed operation in the United States and Canada.  
WirelessUSB LS Radio Module ETSI Testing  
Location: Docs directory  
File Name: WirelessUSB LS Radio Module ETSI Testing.pdf  
Description: This document gives a brief overview of the legal issues governing the manufacture and sale of  
wireless products intended for unlicensed operation in the European Union.  
Preliminary WirelessUSB LS Printed Circuit Board Layout Guidelines  
Location: Docs directory  
File Name: Preliminary WirelessUSB LS PCB Layout Guidelines.pdf  
Description: This document provides guidelines for printed circuit board design using the CYWUSB6932/34.  
Preliminary WirelessUSB LS Micro Bridge Printed Circuit Board Layout Guidelines  
Location: Docs directory  
File Name: Preliminary WirelessUSB LS Micro Bridge PCB Layout Guidelines.pdf  
Description: This document provides guidelines for a microbridge printed circuit board design.  
WirelessUSB Firmware Tips and Tricks  
Location: Docs directory  
File Name: WirelessUSB Tips and Tricks.pdf  
Description: This document provides tips and tricks for firmware when using the CYWUSB6932/34.  
Development Tools  
The PSoC and enCoRe™ development tools are not provided in this kit. Check the Cypress/Cypress  
Microsystems website www.cypress.com for availability.  
Additionally, the WirelessUSB LS KBM RDK is compatible with the WirelessUSB Listener tool available with the  
CY3632 WirelessUSB Development Kit.  
Compliance Testing  
Although most developers are fairly comfortable with the challenges of the hardware and software design  
process, there is one aspect that is often neglected until late in the design process: compliance testing. These are  
the USB and emissions compliance tests for the bridge, keyboard and mouse.  
6
 
 
Getting Started with the CY4632 Reference Design Kit  
First of all, start planning for it early on. For USB, there are compliance workshops (“PlugFests”) run by the USB  
Implementer’s Forum approximately once per quarter, but they can fill up quickly. Check the USB-IF website  
(www.usb.org) for the date of upcoming compliance workshops and reserve a spot early. Also, don’t forget that  
there is a checklist (available on the web) that must be filled out ahead of time and brought with you. This is also  
a common oversight. The alternative to PlugFest is to use an approved test house to obtain your certification, but  
there will of course be a cost for this.  
It is important to understand the different types of USB compliance testing that exist, and how the design of an  
USB device is impacted. To make certain that you have the most up to date information it is highly recommended  
that you check the USB-IF website for current compliance policies.  
Emission testing may also be performed by approved test house(s). Specific emission tests requirements  
depend on which countries the final product may be sold.  
Support  
Hopefully this document has been successful in giving you the guidance that you need to begin work on your  
design. The last thing to cover is how to get help when you need it. Almost everything that you need should be  
included in the materials in this kit. If you can’t find it, or if the information you are looking for just isn’t here, then  
it’s time to get help. There are a few places to go, depending on your preferences or the type of help that you  
need.  
First of all, check the web for updates. We have a section for Development Kits that will probably contain general  
kit items, but there are also sections for Application Notes, Software Downloads, and other types of content. All of  
these types of content should be accessible by starting under the Product Family of WirelessUSB.  
Next is the Cypress Knowledge Base. This is an on-line system that has a collection of frequently asked  
questions and answers. Look for it under www.cypress.com/support and search for your topic.  
If you don’t find what you need in the Knowledge Base, then you can submit a question on-line through our Case  
Management System. You can also access this system from www.cypress.com/support. Enter your question and  
our Applications Engineering team will get back to you with a response. They usually follow up within 24 hours,  
although some cases may take longer depending upon the nature of the question.  
In addition, it is possible to reach Applications Engineering by phone. Dial (800)-541-4736 or (408)-943-2600 and  
enter 8 for support.  
Also please keep your Cypress Sales Representative and Field Applications Engineer informed. Your local FAE  
may be able to provide on-site assistance to help you resolve your problem. If nothing else, they can serve as  
liaison to the internal factory resources to manage requests for assistance.  
For technical assistance with the Agilent ADNS-2030 sensor, visit www.agilent.com/semiconductors or call:  
Americas/Canada: +1 (800) 235-0312 or (408) 654-8675  
Europe: +49 (0) 6441 92460  
China: 10800 650 0017  
Japan: (+81 3) 3335-8152  
Taiwan: (+65) 6755 1843  
7
 
 

Contec Network Card FX DS 110 PCC User Manual
Cooper Lighting Landscape Lighting GMA25SWWAR User Manual
Craftsman Snow Blower 88170 User Manual
Cub Cadet Lawn Mower SLT1550 SLT1554 User Manual
Earthquake Sound Car Amplifier T1000W 2 User Manual
Edirol Computer Keyboard PC 50 User Manual
Electro Voice Microphone CH230WX User Manual
EverFocus Security Camera EDH 5240 User Manual
FieldServer Computer Drive FS 8700 15 User Manual
Flymo Lawn Mower 350 Plus User Manual