Cypress Computer Hardware CYV15G0101EQ User Manual

CYV15G0101EQ  
Multi Rate Video Cable Equalizer  
Pb-free and RoHS compliant  
Features  
Uses Cypress CLEANLink™ technology  
Pin compatible to existing equalizer devices  
Multi rate adaptive equalization  
Operates from 143 to 1485 Mbps serial data rate  
SMPTE 292M, SMPTE 344M, and SMPTE 259M compliant  
Supports DVB-ASI at 270 Mbps  
Functional Description  
The CYV15G0101EQ is a multi rate adaptive equalizer designed  
to equalize and restore signals received over 75Ω coaxial cable.  
The equalizer meets SMPTE 292M, SMPTE 344M, and SMPTE  
259M data rates. The CYV15G0101EQ is optimized to equalize  
up to 350m of Belden 1694A coaxial cable at 270 Mbps and  
typically up to 200m of Belden 1694A coaxial cable at 1.485  
Gbps. The CYV15G0101EQ connects seamlessly to the  
HOTLink II family of transceivers.  
Cable length indicator for HD-SDI and SD-SDI data rates  
Maximum cable length adjustment for HD-SDI and SD-SDI  
data rates  
Carrier detect and mute functionality for HD-SDI and SD-SDI  
data rates  
Equalizer bypass mode  
The CYV15G0101EQ has DC restoration to compensate for the  
DC content of the SMPTE pathological patterns. A cable length  
indicator (CLI) provides an indication of the cable length being  
equalized at HD-SDI and SD-SDI data rates. The maximum  
cable length adjust (MCLADJ) sets the approximate maximum  
cable length to equalize at SD and HD data rates. The  
CYV15G0101EQ’s differential serial outputs (SDO, SDO) mute  
when the approximate cable length set by MCLADJ is reached.  
CD/MUTE is a bidirectional pin that provides an indication of the  
signal present at the equalizer inputs. It also controls muting the  
outputs of the equalizer at HD and SD data rates.  
Seamless connection with HOTLink II™ family  
Equalizes up to 350m of Canare L-5CFB and Belden 1694A  
coaxial cable at 270 Mbps  
Typically equalizes up to 200m of Canare L-5CFB and Belden  
1694A coaxial cable at 1.485 Gbps  
Low power: 160 mW at 3.3V  
Single 3.3V supply  
16-pin SOIC  
Power consumption is typically 160 mW at 3.3V.  
0.18 μm CMOS technology  
Equalizer System Connection Diagram  
CYV15G0101EQ  
Multi Rate  
Cable  
Serial Links  
HOTLink II  
Serializer  
Cable  
Driver  
HOTLink II  
Deserializer  
Copper Cable  
Connections  
Equalizer  
Cypress Semiconductor Corporation  
Document Number: 001-04184 Rev. *E  
198 Champion Court  
San Jose, CA 95134-1709  
408-943-2600  
Revised October 25, 2007  
 
CYV15G0101EQ  
Table 1. Pin Descriptions - CYV15G0101EQ Single Channel Cable Equalizer  
Name  
IO Characteristics Signal Description  
Control Signals  
CLI  
Analog Output  
LVTTL IO  
Cable Length Indicator. CLI provides an analog voltage proportional to the equalized cable  
length. CLI works at both SD-SDI and HD-SDI data rates.  
CD/MUTE  
Carrier Detect or Mute Indicator.  
Output:  
When the incoming data stream is present and the cable length does not exceed that set by  
MCLADJ, the CD/MUTE outputs a voltage less than 0.8V.  
When the incoming data stream is not present or the cable length exceeds that set by  
MCLADJ, the CD/MUTE outputs a voltage greater than 2.8V.  
Input:  
When the CD/MUTE pin is set LOW, the equalizer’s differential serial outputs are not muted.  
When the CD/MUTE pin is set HIGH, the equalizer’s differential serial outputs are muted.  
MCLADJ  
BYPASS  
Analog Input  
LVTTL Input  
Analog  
Maximum Cable Length Adjust. The maximum equalized cable length is set by the voltage  
applied to the MCLADJ input. When the maximum cable length set by MCLADJ is reached,  
CD is driven high and the differential output is muted.  
If MCLADJ functionality is not needed, this pin should be left floating or tied to ground to  
allow maximum equalized cable length.  
MCLADJ works at both SD and HD data rates.  
Equalizer Bypass. When BYPASS is set HIGH, the signal presented at the equalizer’s  
differential serial inputs (SDI, SDI) is routed to the equalizer’s differential serial outputs  
(SDO, SDO) without performing equalization.  
When BYPASS is set LOW, the incoming video data stream is equalized and presented at  
the equalizer‘s serial differential outputs (SDO, SDO).  
In equalizer bypass mode, CD/MUTE is not functional.  
AGC±  
Automatic Gain Control. Place a capacitor of 1 μF between the AGC± pins.  
SDO, SDO  
Differential  
Output  
Differential Serial Outputs. The equalized serial video data stream is presented at the  
SDO/SDO differential serial CML output.  
SDI, SDI  
Differential  
Input  
Differential Serial Inputs. SDI/SDI accepts either a single-ended or differential serial video  
data stream over 75Ω coaxial cable.  
Power  
VCC  
Power  
Gnd  
+3.3V Power.  
GND  
Connect to Ground.  
Document Number: 001-04184 Rev. *E  
Page 3 of 10  
 
CYV15G0101EQ  
Equalizer Operation  
MCLADJ  
The CYV15G0101EQ is a high speed adaptive cable equalizer  
designed to equalize standard definition (SD) and high definition  
(HD) serial digital interface (SDI) video data streams.  
CYV15G0101EQ equalizer is optimized to equalize up to 350m  
of Canare L-5CFB and Belden 1694A cable at 270 Mbps and  
typically up to 200m of Canare L-5CFB and Belden 1694A cable  
at 1.485 Gbps. The CYV15G0101EQ equalizer contains one  
power supply and typically consumes 160 mW power at 3.3V.  
The multi rate equalizer meets the SMPTE 259M, SMPTE 292M,  
SMPTE 344M, and DVB-ASI video standards. It meets all patho-  
logical requirements for SMPTE 292M as defined by RP198, and  
for SMPTE 259M as defined by RP178. The CYV15G0101EQ  
multi rate cable equalizer is auto adaptive from 143 Mbps to  
1.485 Gbps.  
Maximum Cable Length Adjust (MCLADJ) sets the approximate  
maximum amount of cable to be equalized. When the maximum  
cable length set by MCLADJ is reached, CD is driven high and  
the outputs are muted. MCLADJ works at SD and HD data rates.  
The graph in Figure 2 on page 7 illustrates the voltage required  
at MCLADJ input to equalize various Belden 1694A cable  
lengths for SD and HD data rates. If MCLADJ functionality is not  
needed, this pin should be left floating or tied to ground to allow  
maximum equalized cable length.  
CD/MUTE  
Carrier Detect/MUTE (CD/MUTE) is a bidirectional pin that  
provides an indication of the signal present at the equalizer’s  
input, or it controls the muting of the equalizer’s output. The  
(CD/MUTE) operates for both HD and SD data rates.  
The CYV15G0101EQ equalizer has variable gain and multiple  
equalization stages that reverse the effects of the cable. This  
equalization is achieved by separate regulation of the lower and  
higher frequency components in the signal to give a clean output  
eye diagram. The CYV15G0101EQ has DC restoration to  
compensate for the DC content of the SMPTE pathological  
patterns.  
If CD/MUTE is used as an output and the incoming data stream  
is not present or the cable length exceeds that set by MCLADJ,  
the voltage at the CD/MUTE output is greater than 2.8V. If  
CD/MUTE is used as an output, the incoming data stream is  
present and the cable length does not exceed that set by  
MCLADJ, then the voltage at the CD/MUTE output is less than  
0.8V.  
SDI, SDI  
If CD/MUTE is used as an input and is set LOW, the equalizer  
serial outputs are not muted. If the CD/MUTE is used as an input  
and is set HIGH, then the equalizer serial outputs are muted.  
The CYV15G0101EQ accepts single-ended or differential serial  
video data streams over 75Ω coaxial cable. It is recommended  
to AC couple the SDI and SDI inputs as they are internally biased  
to 1.2V.  
When an invalid signal or a signal transmitted with a launch  
amplitude of less than 500 mV at HD data rates is received, the  
equalizer’s serial outputs are muted.  
SDO, SDO  
The CYV15G0101EQ has differential serial output interface  
drivers that use current mode logic (CML) drivers to provide  
source matching for the transmission line. These outputs are  
either AC coupled or DC coupled to the HOTLink II SerDes  
device.  
BYPASS  
The CYV15G0101EQ has a bypass mode that allows the user to  
bypass the equalizer’s equalization and DC restoration  
functions. When the bypass mode is set HIGH, the signal  
presented at the equalizer’s differential serial inputs (SDI, SDI)  
is routed to the equalizer’s differential serial outputs (SDO, SDO)  
without equalizing.  
CLI  
Cable Length Indicator (CLI) is an analog output that gives an  
output voltage proportional to the equalized cable length. CLI  
gives an approximation of the length of cable at the differential  
serial inputs (SDI, SDI). CLI works at high definition (HD) data  
rates and standard definition (SD) data rates. The graph in  
Figure 3 on page 7 illustrates the CLI output voltage at various  
Belden 1694A cable lengths. With an increase in cable length,  
CLI output voltage decreases.  
When BYPASS is set LOW, the incoming video data stream is  
equalized and presented at the equalizer‘s differential serial  
outputs (SDO, SDO).  
In equalizer bypass mode, CD/MUTE is not functional.  
AGC  
Place a capacitor of 1 μF between the AGC± pins of the  
CYV15G0101EQ equalizer.  
Document Number: 001-04184 Rev. *E  
Page 4 of 10  
 
CYV15G0101EQ  
Power Up Requirements  
Maximum Ratings  
The CYV15G0101EQ contains one power supply. The voltage  
on any input or IO pin must not exceed the power pin during  
power up.  
Exceeding maximum ratings may shorten the useful life of the  
device. These user guidelines are not tested.  
Storage Temperature.................................. –65°C to +150°C  
Ambient Temperature with  
Power Applied ............................................ –55°C to +125°C  
Operating Range  
Ambient  
Temperature  
Range  
V
CC  
Supply Voltage to Ground Potential................–0.5V to +3.8V  
DC Voltage Applied to Outputs  
in High Z State....................................... –0.5V to V + 0.5V  
Commercial  
0°C to +70°C  
+3.3V ±5%  
CC  
DC Input Voltage .....................................0.5V to V +0.5V  
CC  
Electro Static Discharge (ESD) HBM.......................> 2000 V  
(JEDEC EIA/JESD-A114A)  
Latch Up Current ....................................................> 200 mA  
DC Electrical Characteristics  
Parameter  
Description  
Test Conditions  
Min  
Typ  
3.3  
160  
48  
Max  
3.465  
190  
60  
Unit  
V
[1]  
V
Supply Voltage  
3.135  
125  
38  
CC  
D
P
Power Consumption  
mW  
mA  
V
I
Supply Current  
S
V
Output Common Mode Voltage  
Load = 50Ω  
VCC –  
ΔVSDO/2 = 2.9  
CMOUT  
V
Input Common Mode Voltage  
(Bypass = High)  
1
0
1.4  
2.9  
V
V
CMIN  
Input Common Mode Voltage  
(Bypass = Low)  
V
V
V
CLI DC Voltage (0m)  
2.2  
1.5  
2.65  
1.9  
1.3  
0.72  
2.95  
2.3  
V
V
V
V
V
V
V
[1]  
CLI DC Voltage (No Signal)  
Floating MCLADJ DC Voltage  
[3]  
MCLADJ Range  
0.4  
2.8  
1.02  
CD/MUTE Output Voltage  
Carrier Not Present  
Carrier Present  
CD/MUTE(OH)  
CD/MUTE(OL)  
CD/MUTE  
0.8  
CD/MUTEInputVoltageRequiredto Min to Mute  
2.5  
[1]  
Force Outputs to Mute  
V
CD/MUTEInputVoltageRequiredto Max to Activate  
Force Active  
1
V
CD/MUTE  
Notes  
1. Production test.  
2. Calculated results from production test.  
3. Not tested. Based on characterization.  
Document Number: 001-04184 Rev. *E  
Page 5 of 10  
 
     
CYV15G0101EQ  
AC Electrical Characteristics  
Parameter  
Description  
Test Conditions  
Min  
Typ  
Max  
1485  
1200  
Unit  
Mbps  
mV  
[1]  
Serial Input Data Rate  
143  
V
Input Voltage Swing  
Single-ended, at the transmitter,  
HD data rate  
500  
SDI  
SDI  
V
Input Voltage Swing  
Single-ended, at the transmitter,  
SD data rate  
500  
1200  
mV  
[1]  
ΔV  
Output Voltage Swing  
Differential , 50Ω load  
450  
700  
950  
mV  
UI  
SDO  
p-p  
Output Jitter for Various Cable  
Lengths and Data Rates  
270 Mbps  
0.2  
Belden 1694A: 0-350m  
Canare L-5CFB: 0-350m  
800 mV transmit amplitude  
Equalizer pathological pattern  
1.485 Gbps  
0.25  
UI  
UI  
Belden 1694A: 0-140m  
Canare L-5CFB: 0-140m  
800 mV transmit amplitude  
Equalizer pathological pattern  
1.485 Gbps  
0.3  
Belden 1694A: 140-200m  
Canare L-5CFB: 140-200m  
800 mV transmit amplitude  
Equalizer pathological pattern  
Output Rise/Fall Time  
20% - 80%, HD data rate  
80  
80  
120  
120  
220  
350  
30  
ps  
ps  
ps  
ps  
%
Output Rise/Fall Time  
20% - 80%, SD data rate  
Mismatch in Rise/Fall Time  
HD color bar pattern  
Duty Cycle Distortion  
20  
Overshoot  
10  
Input Return Loss  
-15  
dB  
kΩ  
pF  
Ω
Input Resistance  
Single-ended  
Single-ended  
Single-ended  
2.5  
1
Input Capacitance  
Output Resistance  
50  
Notes  
4. Not tested. Guaranteed by design simulations.  
5. Based on characterization across temperature and voltage with 140m of Belden 1694A cable, transmitting SMPTE Equalizer Pathological Test Pattern.  
6. Based on characterization across temperature and voltage with 350m of Belden 1694A cable, transmitting SMPTE Equalizer Pathological Test Pattern.  
7. Based on characterization at T = 25°C, V = 3.3V  
A
CC  
Document Number: 001-04184 Rev. *E  
Page 6 of 10  
 
       
CYV15G0101EQ  
Typical Performance Graphs  
(Unless otherwise stated, V  
= 3.3V, T = 25°C)  
CC  
A
Figure 2. MCLADJ Input Voltage vs. Belden 1694A Cable Length at SD-SDI and HD-SDI Data Rates  
2.7  
2.6  
2.5  
2.4  
2.3  
2.2  
2.1  
2
1.9  
1.8  
1.7  
0
50  
100  
150  
200  
250  
300  
350  
CABLE LENGTH (m)  
Figure 3. CLI Output Voltage vs. Belden 1694A Cable Length at SD-SDI and HD-SDI Data Rates  
2.7  
2.6  
2.5  
2.4  
2.3  
2.2  
2.1  
2
1.9  
1.8  
1.7  
0
50  
100  
150  
200  
250  
300  
350  
CABLE LENGTH (m )  
Document Number: 001-04184 Rev. *E  
Page 7 of 10  
 
   
CYV15G0101EQ  
Typical Application Circuit  
Figure 4. Interfacing CYV15G0101EQ to the HOTLink II SerDes  
C D / M U T E  
C L I  
C12  
+3.3V  
+3.3V  
C10  
0.01 μF  
0. 01 μF  
LFI  
RXLE  
SDASEL  
LPEN  
BNC JACK  
RXD7  
RXD6  
RXD5  
RXD4  
RXD3  
RXD2  
RXD1  
RXD0  
RXOP  
RXST2  
RXST1  
RXST0  
RXCLK+  
R16  
1 μF  
1 μF  
C15  
C16  
16  
15  
14  
13  
12  
11  
10  
9
1
2
3
4
5
6
7
8
C D / M U T E  
75Ω  
C L I  
V C C  
V E E  
S D I  
INSEL  
V C C  
V E E  
S D O  
75 Ω  
L2  
Z0  
Z0  
IN1+  
2 Z0  
R18  
S D O  
S D I  
6.4 n H  
IN1  
V E E  
V E E  
M C L A D J  
B Y P A S S  
A G C +  
FRAMCHAR  
RFEN  
A G C  
+
37.4 Ω  
75 Ω  
1 μF  
C11  
RFMODE  
DECMODE  
RXCKSEL  
RXMODE  
RXRATE  
R15  
R14  
CYV15G0101EQ  
RXCLK  
RXCLKC+  
M C L A D J  
CYV15G0101DXB  
Document Number: 001-04184 Rev. *E  
Page 8 of 10  
 
CYV15G0101EQ  
Ordering Information  
Operating  
Range  
Ordering Code  
Package Name  
Package Type  
CYV15G0101EQ-SXC  
SZ16.15  
Pb-free 16-Pin 150 Mil SOIC  
0 to 70°C  
Package Dimension  
Figure 5. 16-Pin (150 Mil) SOIC S16.15  
0). ꢀ )$  
$)-%.3)/.3 ). ).#(%3;--= -).ꢅ  
-!8ꢅ  
2%&%2%.#% *%$%# -3ꢋꢁꢀꢆ  
ꢁꢅꢀꢈꢁ;ꢇꢅꢂꢀꢁ=  
ꢁꢅꢀꢈꢊ;ꢇꢅꢃꢂꢊ=  
0!#+!'% 7%)'(4 ꢁꢅꢀꢈGMS  
ꢁꢅꢆꢇꢁ;ꢈꢅꢂꢉꢆ=  
ꢁꢅꢆꢉꢉ;ꢄꢅꢀꢃꢊ=  
0!24 ꢌ  
3ꢀꢄꢅꢀꢈ  
34!.$!2$ 0+'ꢅ  
3:ꢀꢄꢅꢀꢈ ,%!$ &2%% 0+'ꢅ  
ꢀꢄ  
ꢁꢅꢁꢀꢁ;ꢁꢅꢆꢈꢉ=  
ꢁꢅꢁꢀꢄ;ꢁꢅꢉꢁꢄ=  
8 ꢉꢈ²  
ꢁꢅꢇꢂꢄ;ꢃꢅꢂꢁꢉ=  
ꢁꢅꢇꢃꢇ;ꢃꢅꢃꢂꢆ=  
3%!4).' 0,!.%  
ꢁꢅꢁꢄꢀ;ꢀꢅꢈꢉꢃ=  
ꢁꢅꢁꢄꢂ;ꢀꢅꢊꢆꢊ=  
ꢁꢅꢁꢁꢉ;ꢁꢅꢀꢁꢆ=  
ꢁꢅꢁꢈꢁ;ꢀꢅꢆꢊꢁ=  
ꢁꢅꢁꢁꢊꢈ;ꢁꢅꢀꢃꢁ=  
ꢁꢅꢁꢁꢃꢂ;ꢁꢅꢆꢉꢃ=  
ꢁꢅꢁꢀꢄ;ꢁꢅꢉꢁꢄ=  
ꢁꢅꢁꢇꢈ;ꢁꢅꢂꢂꢃ=  
"3#  
ꢁ²^ꢂ²  
ꢁꢅꢁꢀꢇꢂ;ꢁꢅꢇꢈꢁ=  
ꢁꢅꢁꢁꢉ;ꢁꢅꢀꢁꢆ=  
ꢁꢅꢁꢁꢃꢂ;ꢁꢅꢆꢉꢃ=  
ꢁꢅꢁꢀꢃꢆ;ꢁꢅꢉꢂꢊ=  
51-85068-*B  
Document Number: 001-04184 Rev. *E  
Page 9 of 10  
 
CYV15G0101EQ  
Document History Page  
Document Title: CYV15G0101EQ Multi Rate Video Cable Equalizer  
Document Number: 001-04184  
ISSUE  
DATE  
ORIG. OF  
CHANGE  
REV.  
ECN NO.  
DESCRIPTION OF CHANGE  
New preliminary datasheet  
**  
389196  
394763  
431556  
504487  
SEE ECN  
SEE ECN  
SEE ECN  
SEE ECN  
BCD  
BCD  
BCD  
FRE  
*A  
*B  
*C  
Updated preliminary datasheet for release to the internet  
Changed AC and DC parameters  
Updated AC and DC parameters. Changed datasheet status from  
preliminary to final  
*D  
*E  
514998  
SEE ECN  
SEE ECN  
FRE  
Fixed typo in diagrams on page 2  
1396423  
UKK/AESA  
Updated AC and DC electrical characteristics and pin description of  
MCLADJ and CD.  
© Cypress Semiconductor Corporation, 2007. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any  
circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical,  
life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical  
components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems  
application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.  
Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign),  
United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of,  
and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress  
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without  
the express written permission of Cypress.  
Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not  
assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where  
a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer  
assumes all risk of such use and in doing so indemnifies Cypress against all charges.  
Use may be limited by and subject to the applicable Cypress software license agreement.  
Document Number: 001-04184 Rev. *E  
Revised October 25, 2007  
Page 10 of 10  
PSoC Designer™, Programmable System-on-Chip™, and PSoC Express™ are trademarks and PSoC® is a registered trademark of Cypress Semiconductor Corp. All other trademarks or registered  
2
trademarks referenced herein are property of the respective corporations. Purchase of I C components from Cypress or one of its sublicensed Associated Companies conveys a license under the  
2
2
2
Philips I C Patent Rights to use these components in an I C system, provided that the system conforms to the I C Standard Specification as defined by Philips. HOTLink II is a trademark of Cypress  
Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations. All products and company names mentioned in this document may  
be the trademarks of their respective holders.  
 

Cornelius Beverage Dispenser TP01070 User Manual
Cortelco Telephone ez TOUCH User Manual
Craftsman Tiller 917 299751 User Manual
Craftsman Trimmer 35879101 User Manual
Dell Server E05S User Manual
Desa Ventilation Hood VDVC36BH User Manual
Dyson Vacuum Cleaner DC37 User Manual
Euro Pro Food Processor KP81E User Manual
GE Air Conditioner AZ85E18DAC User Manual
Gitzo Camcorder Accessories G1548 User Manual