Delfield Refrigerator SAR1S G User Manual

®
Project __________________________________  
Item ____________________________________  
Quantity ________________________________  
CSI Section 11400  
Delfield  
Approved _______________________________  
Date ____________________________________  
Specification Line®  
Self-Contained Glass Door Shallow Reach-In Refrigerator  
Models  
One section Two section Three section  
SSR1S-G  
SSR2S-G  
SSR3S-G  
Stainless exterior and interior glass full door  
SSR1S-GH  
SAR1S-G  
SAR1S-GH  
SMR1S-G  
SMR1S-GH  
SSR2S-GH  
SAR2S-G  
SAR2S-GH  
SMR2S-G  
SMR2S-GH  
SSR3S-GH  
SAR3S-G  
SAR3S-GH  
SMR3S-G  
SMR3S-GH  
Stainless exterior and interior glass half door  
Stainless exterior and aluminum interior glass full door  
Stainless exterior and aluminum interior glass half door  
Stainless front aluminum exterior and interior glass full door  
Stainless front aluminum exterior and interior glass half door  
Standard Features  
Options &  
Accessories  
Stainless steel interior and exterior (SS)  
Stainless steel exterior, aluminum interior (SA)  
Aluminum interior and exterior, stainless front  
(SM)  
Security (prison) package  
Incandescent light  
Door field rehingability  
Additional shelves  
Tray slides  
Stainless steel back  
Laminate on front, sides and back  
Bottom mount electrical  
Stainless steel banking strip  
Heat shield end  
Stainless steel kick plate  
Laminate kick plate  
4stainless steel utility base  
230-50-1 electrical  
220-60-1 electrical  
Built in door locks with heavy duty strikes  
Pressure relief valve is standard to prevent  
door vapor lock  
Exterior digital thermometer with high/low  
temperature alarm  
Easy to use electronic control  
Easy access “flip upshroud  
Three wire shelves per section - SA/SS  
standard with chrome plated shelves and SM  
standard with epoxy coated shelves  
10attached cord and plug on 115V units  
6adjustable stainless steel legs  
Stainless steel breaker strips  
High density foamed in place environmentally  
friendly, Kyoto Protocol Compliant, Non ODP  
(Ozone Depletion Potential), Non GWP (Global  
Warming Potential) polyurethane keeps  
energy costs low  
Energy savings door heater switch  
Two year parts & labor warranty  
Five year compressor warranty  
SSR1S-G  
Specifications  
Exterior: SS and SA models shall have corrosion resistant stainless  
steel exterior cabinet sides, front and shroud. SM models shall have  
corrosion resistant aluminum on exterior cabinet sides and will have  
stainless front and shroud. All units shall have the upper shroud  
hinged with a gas assist stay open feature to provide easy access to  
the refrigeration system.  
along vertical dimension of the door. Door gaskets are magnetic and  
mount to the door, snapping in place and removable with out tools.  
Keyed door lock is mounted to the door. Lock engages into a heavy  
duty strike mounted to the cabinet face.  
Refrigeration system: All components are mounted to the exterior  
of the cabinet ceiling, outside the food zone and are assembled  
as one piece and can be removed as one piece. Environmentally  
friendly R404A refrigerant is used. The system has the capability  
of maintaining between 27ºF and 40ºF in heavy use food service  
operations. Refrigerant is metered using a highly responsive  
thermostatic expansion valve. System is controlled using Delfield’s  
ACT-Advanced Control Technology electronic temperature control,  
which provides improved pull down times, reduces compressor  
cycling and longer compressor life with lower energy consumption.  
Interior: Cabinet interior shall be corrosion resistant stainless steel  
(SS models) or heavy gauge aluminum (SA and SM models). Bottom  
and top surfaces shall be die stamped to provide radius corners and  
recessed floor. Three wire shelves are provided per section, SA/SS  
standard shelves are chrome plated, SM standard shelves are epoxy  
coated. Shelves rest on clips which are adjustable on 1increments  
on stainless steel pilasters affixed to the cabinet interior. Pilasters are  
removable without tools for cleaning. Mounted to the interior ceiling,  
the interior fluorescent light is controlled automatically through a  
switch mounted in the hinge assembly to protect against breakage.  
Door openings are protected with heavy gauge stainless steel  
breaker strips. An air duct shall be mounted to the ceiling assuring  
low velocity, even air movement throughout the cabinet interior.  
Control system uses adaptive defrost to assure evaporator coil is free  
of ice and is operating at optimum efficiency. Evaporator condensate  
is eliminated using an energy efficient hot gas system.  
Electrical: Standard electrical on one and two section units shall  
be 115V, 60 Hz single phase. A 10cord and plug is supplied and  
attached to a junction box mounted on the exterior top of the  
cabinet. Three section units shall be 115/208-230 and will require  
hardwire connections.  
Doors: Double paned tempered thermopane glass. Constructed with  
a combination of extruded aluminum and PVC. Each door has two  
edgemount, self-closing, cam lift style hinges. Doors can be removed  
from the cabinet without the use of tools. Door handle is continuous  
980 S. Isabella Rd.  
Mt. Pleasant, Michigan 48858  
Fax: 800-669-0619  
Phone: 800-733-8948 or 989-773-7981  
 

Conair Trimmer GMT175R User Manual
Craftsman Pressure Washer 9197627 User Manual
Crown Audio Microphone GLM 100 User Manual
Dixon Lawn Mower 13782 0503 User Manual
Dynacord Music Mixer 1000 3 User Manual
Dynaudio Speaker IP 24 User Manual
Feiyue Sewing Machine FY811 User Manual
Fisher Price Hiking Equipment G8684 User Manual
Fisher Price Video Games R4567 User Manual
Furuno Battery Charger BC 6158 User Manual