Delkin Devices Network Card MultiMedia Card to Floppy Disk Adapter User Manual

TM  
FlashPath  
MultiMediaCard to Floppy Disk  
Adapter  
User’s Manual  
For use with Windows 95/98/ME/2000, Windows NT4.0  
and Apple Mac OS 7.5.1+  
Delkin Part No. DDFLSPTH2-AD  
To prevent damage to the module or user, follow these basic handling guidelines:  
Do not drop, bend or dismantle the module.  
Keep cool and dry. Avoid exposure to heat or liquids.  
Avoid dust, excessive vibrations and volatile substances.  
Keep away from electromagnetic sources, such as magnets,  
monitors, speakers and transformers.  
© Copyright Delkin Devices, Inc., All rights reserved. No part of this publication  
may be reproduced in any form, or by any means without prior written permission  
of Delkin Devices, Inc.  
Delkin Devices, and eFilm are registered trademarks of Delkin Devices, Inc. All other brand names, trademarks  
and part numbers are the property of their respective owners. They are used for identification purposes only, andin no  
way imply ownership by Delkin Devices.  
Printed in USA  
MNCA0014 • Rev 1.2  
 
DDFLSPTH2-AD  
FlashPath Floppy Adapter for MultiMediaCard  
Introduction  
Thank you and congratulations on your purchase of the FlashPath Floppy Disk  
Adapter for MultiMediaCard. FlashPath is a convenient way to transfer digital images,  
music, voice and data files between personal computers/laptops, and MultiMediaCard  
compliant digital appliances using a standard 3.5” floppy drive.  
Before using the FlashPath, please take some time to read all instructions and war-  
ranty information. Additional information can be found in the README.TXT included  
Included Components  
FlashPath Adapter  
Driver CD  
Registration Card  
Manual  
Special Handling Instructions  
Keep the adapter free from dust. Store it in its protective case when not in use.  
Never remove the FlashPath from the floppy disk drive while it is being accessed  
(reading, writing, erasing, formatting, etc.). Doing so can corrupt the data and file  
systems stored on the MultiMediaCard.  
General Notes Regarding FlashPath & MultiMediaCard  
FlashPath supports MultiMediaCards of 4MB, 8MB, 16MB, 32MB, 64MB and  
higher capacities as they become available.  
To avoid loss of valuable data, it is recommended that you test the functionality  
and compatibility of all of your equipment before attempting to transfer important  
pictures or files. Test the FlashPath with expendable files.  
To conserve battery power, the FlashPath will power-down if inactive for more  
than five minutes. To reactivate the FlashPath, eject it; then reinsert it. To addi-  
tionally save power, it is recommended that you eject the FlashPath from the flop-  
py disk drive as soon as it is not in use.  
To view data files saved on the MultiMediaCard, based on the type of data, you  
will need specialized software that can view or edit these files (photo editor, word  
processor, etc). Some MultiMediaCard devices use a proprietary format that  
require you to install additional software to view the files. See your device’s  
documentation for more information.  
FlashPath can not function as a start-up disk. Wait for start-up befor insertion.  
Some driver updates may include support for Secure Digital (SD) cards. Since  
there is a physical difference between SD cards and MMC cards, 9-pin connector  
instead of 7-pins, SD cards cannot be used in current adapters. The FlashPath for  
SD card drivers will be backward compatible with FlashPath-MMC adapters.  
Delkin Devices User’s Manual  
Page 1  
 
FlashPath Floppy Adapter for MultiMediaCard  
DDFLSPTH2-AD  
Inserting a MultiMediaCard  
Insert the MultiMediaCard into the FlashPath with the gold contacts facing toward the  
black plastic back and away from the metallic cover. Gently push the card until it is  
flush with the edge of the FlashPath Adapter. (See figure 1)  
Metal face of FlashPath  
Figure 1:  
Insertion slot on notched edge  
Inserting the  
MultiMedia  
Card  
Label side up;  
Contact side down  
Installing new Batteries in FlashPath  
The FlashPath is packaged with batteries pre-installed. When the batteries run out,  
replace them with new ones. Always replace both batteries at the same time.  
1. Place the FlashPath on a flat surface with the black plastic surface facing up.  
2. Gently press down on the battery cover, turning it counter-clockwise until the  
notch on the battery cover aligns with the unlocked position. Lift the cover off.  
Repeat for second battery cover.  
3. Remove the old batteries and replace them with two CR2016 Lithium batteries.  
Make sure that the (+) poles of the batteries face upward. Replace the battery  
covers. (See figure 2)  
Counter-clockwise to unlock  
Clockwise to lock  
Figure 2:  
Installing  
Lithium button  
New  
Batteries  
battery (CR2016)  
Page 2  
Delkin Devices User’s Manual  
 
DDFLSPTH2-AD  
FlashPath Floppy Adapter for MultiMediaCard  
FlashPath for IBM Compatible PCs  
When using FlashPath in an IBM PC system, files may be moved both to and from a  
MultiMediaCard via the FlashPath. It also comes with several utilities.  
PC System Requirements  
IBM-PC or fully compatible desktop or laptop PC.  
System requires 486 (or later) or Pentium processor  
Operating System: Windows 2000/ME/98/95/NT 4.0 (SP3+)  
Standard 3.5” Floppy Disk Drive as drive A: or B:  
FlashPath is not compatible with removable floppy drives or external floppy drives  
(serial, parallel, PC Card or USB).  
FlashPath is not compatible with high-capacity drives such as the LS-120  
SuperDisk Drive.  
Non-Supported Systems:  
RISC based systems (Alpha AXP, MIPS R4x00, or PowerPC)  
Driver Software Installation for Windows 2000/ME/98/95/NT4.0  
Before using the FlashPath, you must install the device drivers located on the  
SPECIAL NOTE FOR NTFS-BASED SYSTEM USERS: Because of the NTFS file  
system security features, it is not possible to boot the system and access the hard  
disk from a standard bootable DOS disk (e/g/ a Windows 98/95 recovery disk.  
Therefore, prior to the installation of FlashPath software to Windows 2000, or any  
system using NTFS, please ensure you have prepared a recovery disk set as detailed  
in Microsoft’s documentation.  
Prior to any software installation always ensure you have backed up your hard drive  
and prepared a recovery disk.  
Figure 3:  
Driver  
Installation  
Menu  
Delkin Devices User’s Manual  
Page 3  
 
FlashPath Floppy Adapter for MultiMediaCard  
DDFLSPTH2-AD  
1. Start Windows and close any other applications during installation.  
2. Insert the Delkin Devices driver CD-ROM. If the CD does not start automatically,  
double click on the CD-ROM drive in My Computer. The CD will open in a driver  
installation application. (See Figure 3)  
3. Click FlashPath-MMC from the list of products on the left.  
4. Verify that your product matches the one pictured on the screen.  
5. Click the button labeled Click Here to Begin Installation and follow the on-screen  
instructions. For best results, allow the drivers to be installed into the default  
locations.  
6. When the installation is complete, reboot your computer.  
NOTE: Setup, by default, copies the FlashPath files to the directory C:\Program  
Files\Smartdisk\FlashMMC or FlashPath for SD It is strongly recommended that  
the files be copied to the default directory.  
Basic Operations for Windows  
With the drivers installed, and your MultiMediaCard inserted into the FlashPath, you  
can now transfer data between the card and your computer/laptop. You can copy, cut  
or paste to or from the FlashPath, delete, move, edit files (using photo editors, word  
processors, etc, based on type of data).  
Zip files may be transferred to and from the MultiMediaCard via the FlashPath,  
however, DO NOT use compression utilities (i.e. Stacker, DriveSpace, etc.) on  
the MultiMediaCard or FlashPath file systems.  
Accessing the FlashPath  
1. Insert the MultiMediaCard into the FlashPath with gold contacts facing the black  
plastic face and away from the metallic cover. (See Figure 1).  
2. Insert the FlashPath, metal side up, into the 3.5” floppy disk drive of the computer  
in the direction of the arrow. (See Figure 4)  
Notched edge  
with MultiMedia  
Card inserted  
Figure 4:  
Inserting the  
FlashPath  
Arrow  
Adapter  
3.5” Floppy Disk Drive  
Metallic face  
of FlashPath  
Page 4  
Delkin Devices User’s Manual  
 
DDFLSPTH2-AD  
FlashPath Floppy Adapter for MultiMediaCard  
3. The FlashPath can be accessed in the same manner as you would a 3.5” floppy  
disk. For example, double-click the 31/2 Floppy (A:) icon. The initial card  
recognition may take longer with higher capacity cards.  
Transferring Files with the FlashPath  
It is recommended that you copy files to a destination folder on the hard drive  
before accessing them.  
Cameras write image files with generic names (i.e. IMG0001.JPG, IMG0002.JPG,  
IMG0003.JPG, etc.) and begin counting again at 001 when a blank card is  
inserted. When transferring files to a common location, this can result in two or  
more files on your computer having the same name, prompting you to overwrite.  
To avoid overwriting, create a new folder for each transfer session or optionally  
rename the individual picture files.  
After verifying that all the desired files have been copied to your hard drive, the  
original files on the MultiMediaCard can then be deleted.  
FlashPath Utilities for Windows  
FlashPath Status Monitor  
The FlashPath Status Monitor is automatically loaded at startup and can be activated  
by clicking on the Status Monitor icon in the system tray. (See Figure 5)  
Status Monitor icon  
Figure 5:  
The  
FlashPath  
Diskette Mode: No FlashPath or FlashPath without MultiMediaCard.  
Normal Operation: FlashPath fully functional.  
Status  
Monitor  
Low Battery: FlashPath fully functional. Replace batteries soon.  
Battery Critical: Reads disabled. Replace batteries immediately.  
Status Error messages pop-up automatically when you position your cursor over the  
Status Monitor icon. The Status Monitor display will be updated each time the  
FlashPath is accessed.  
Sleeping: Device has entered sleep mode to conserve batteries. To reactivate,  
eject, wait awhile, and reinsert FlashPath.  
Missing MultiMediaCard: MultiMediaCard not detected in FlashPath. To resolve,  
eject FlashPath. Check that MultiMediaCard is inserted and in correct position.  
Reinsert FlashPath.  
System Error messages automatically open when their condition exists. Each error  
message is accompanied by an icon.  
Excessive Bad Spots: The MultiMediaCard has excessive bad spots. Let the  
computer complete reads (if possible) and replace the corrupted card with a new  
one. The corrupted card may need to be reformatted (losing all stored data).  
Sleeping: The same as Status Error message.  
Delkin Devices User’s Manual  
Page 5  
 
FlashPath Floppy Adapter for MultiMediaCard  
DDFLSPTH2-AD  
Missing MultiMediaCard: The same as Status Error message.  
Low Battery: Let computer complete reads, and replace the batteries soon.  
Battery Critical: Complete reads (if possible), and replace both batteries im-  
mediately  
Uninstalling FlashPath for Windows 2000/ME/98/95/NT4.0  
To remove the FlashPath status monitor program and driver.  
1. Go to Start > Settings > Control Panel.  
2. Double-click the Add/Remove Programs icon.  
3. Select FlashPath from the program list and click Add/Remove. Follow the on  
screen instructions. The computer must be rebooted to complete the uninstall.  
Cleaning the FlashPath  
Remove the FlashPath from the floppy disk drive; remove the MultiMediaCard from  
the FlashPath. Use a clean, dry, lint free cloth or cotton swab to wipe off any oil, dust  
or particles in the slot on the front and back of the FlashPath. (See Figure 6)  
If necessary, clean the remainder of the outside of the FlashPath with a clean, lint free  
cloth or paper towel and denatured alcohol.  
Figure 6:  
Cleaning the  
FlashPath  
Page 6  
Delkin Devices User’s Manual  
 
DDFLSPTH2-AD  
FlashPath Floppy Adapter for MultiMediaCard  
FlashPath for Macintosh  
The FlashPath access application for Macintosh is a read-only utility for transferring  
data from the MultiMediaCard to the hard drive via the FlashPath. You cannot write  
to, modify, delete files from or format the MultiMediaCard using the FlashPath.  
Formatting on the Mac may make your card unrecognizable to your MMC device.  
Macintosh System Requirements  
Apple Macintosh PowerPC or PowerBook  
System: PowerPC 601 CPU or later (Power Macintosh)  
Hard Drive: 32MB or more, free space  
Operating System: MAC OS 7.5.1 or higher  
Apple 3.5” Internal 1.44MB floppy disk drive  
PowerBook G3 Users: The Floppy Disk Drive must be installed in the right-side  
expansion bay to use FlashPath. FlashPath won’t work in a Floppy Disk Drive  
installed in the left-side expansion bay.  
FlashPath is not compatible with removable floppy drives or external floppy drives  
(serial, parallel, PC Card or USB).  
FlashPath is not compatible with high-capacity drives such as the LS-120  
SuperDisk Drive.  
Non-supported Systems:  
Multiple CPU systems (dual processors).  
PowerMac 8500/180 - B1 running MacOS 7.5.3 rev 2.2  
Centris 650 (68040/16 Mhz) running MacOS 7.6.1  
Quadra 610 (680404/20 Mhz) running MacOS 7.5.3  
iMac  
Software Installation for Macintosh OS 7.5.1+  
Before using the FlashPath, you must install the “Read-MMC-FlashPath” program  
located on the accompanying CD-ROM.  
Prior to any software installation always ensure you have backed up your hard drive  
and prepared a recovery disk.  
1. Insert the Driver CD-ROM, then double-click on the CD icon when it appears.  
Figure 7:  
The FlashPath  
MultMediaCard  
Installer  
Delkin Devices User’s Manual  
Page 7  
 
FlashPath Floppy Adapter for MultiMediaCard  
DDFLSPTH2-AD  
2. Select FlashPath MultiMediaCard from the product list. (See Figure 7)  
3. Click the button labeled Install and follow the on screen instructions. Select  
Restart Computer after installation is complete. Installation will place a  
MMC-Flash icon on the desktop.  
Read-  
Basic Operation for Macintosh  
Make sure no applications other than the Finder are running. The Read-MMC-  
FlashPath utility is time-critical and is designed for single-task usage.  
Before running the Read-MMC-FlashPath application, PC Exchange or File Exchange  
(depending on your computer) in the Control Panels menu of the Apple Menu Items  
must be turned off. They can also be disabled in the Extension Manager. These  
programs may be reactivated when you are done using FlashPath.  
1. Insert a MultiMediaCard into the FlashPath with the gold contacts facing the black  
plastic face and away from the metallic cover. (See Figure 1).  
2. Double-click on Read-MMC-FlashPath icon. Wait until the menu bar switches  
completely to the FlashPath access application.  
3. On the menu bar, go to File > “Import from FlashPath…”.  
4. When prompted, insert the FlashPath, metal side up, into the 3.5” Floppy Disk  
Drive of the computer in the direction of the arrow. (See Figure 4)  
5. Follow the on screen instructions to open the MultMediaCard window. For digital  
photo files: if your camera supports thumbnails, they can be displayed for each  
image. (See Figure 8)  
Figure 8:  
The  
MultiMediaCard  
window  
6. Open the appropriate folder to transfer the images you want to your hard drive.  
Note: Folders cannot be transferred. If you intend to transfer All Files, you must  
open the folder first.  
7. Select All Files (in a folder) or press and hold the Command key while selecting  
only the files you want to transfer.  
8. Click Open and select the hard drive destination for your images.  
9. Click Save to transfer your pictures to the selected destination. (See Figure 9)  
Note: for cards that contain more than one folder, you can go up one folder level  
by selecting the .. \ line.  
Page 8  
Delkin Devices User’s Manual  
 
DDFLSPTH2-AD  
FlashPath Floppy Adapter for MultiMediaCard  
Figure 9:  
The  
Destination  
window  
Operational Notes  
While the FlashPath is compatible with the widest possible variety of cards, file formats  
and computers, some incompatibilities may arise. The FlashPath is compatible with all  
MultiMediaCards that follow the specifications regulated and certified by the  
MultiMediaCard Association.  
A corrupt file on your MultiMediaCard can cause a device failure or system crash  
when transferring files to your computer. Recovery programs such as Scandisk  
can be used to detect and repair most disk errors. It may also be necessary to re-  
format the card, which will erase all files stored on the card. Some of the causes  
of file corruption are:  
!
!
!
Unsteady power supply while transferring files, such as a low camera battery  
or improperly connected reader.  
Card removed from reader or camera, or any other type of interruption while  
transfering or accessing files.  
Improperly formatted card.  
MultiMediaCards can be verified by placing them back in the camera and using the  
cameras picture viewing option to see if the files are intact.  
System errors while using the FlashPath, such as system hangs, can usually be  
resolved by simply re-booting (after removing the FlashPath). Serious or recurring  
malfunctions may reqire a re-installation of the FlashPath drivers.  
Mac: In some instances, a disk icon will be left on the Desktop when a transfer  
operation is canceled. This can usually be dragged to the Trash while the Read-  
MMC-FlashPath Utility is still open. The Utility can then be closed.  
Delkin Devices User’s Manual  
Page 9  
 
FlashPath Floppy Adapter for MultiMediaCard  
DDFLSPTH2-AD  
Troubleshooting  
This is a basic “common” troubleshooting list. If your problem isn’t solved by those  
listed, Please visit our web site http://www.delkin.com for FAQs and current information  
on compatibility issues as well as the latest software drivers. Or see the back page for  
contacting Tech Support.  
CAUSE  
SYMPTOM  
SOLUTION  
Eject the FlashPath, wait a  
second and reinsert it.  
The FlashPath isn’t being  
recognized by the computer  
Or  
The card was accessed before  
it was recognized by the  
system.  
I’m getting “The disk in drive A  
is not formatted” error.  
Eject the FlashPath, wait a  
second and reinsert it.  
The FlashPath has gone into  
sleep mode.  
Recheck that the MultiMedia  
Card is properly inserted.  
The MultiMidiaCard isn’t  
inserted in the proper direction  
or isn’t inserted fully.  
Check that batteries are  
installed correctly.  
The batteries are not loaded or  
are loaded in the wrong  
direction.  
The batteries are depleted.  
Install new batteries.  
The driver sofware may not  
have been properly installed,  
or system wasn’t restarted  
after installation.  
Reboot the computer. If you  
get the same results, reinstall  
the driver software.  
Some anti-virus programs  
interfere with FlashPath  
functions.  
Disable anti-virus scans during  
COPY, CREATE, RANAME, or  
similar operations. In some  
cases, you may need to  
temporarily disable all anti-  
virus software while using  
FlashPath.  
Error writing to the FlashPath,  
or can’t format the MultiMedia  
Card in the FlashPath.  
On Macintosh systems,  
FlashPath is read-only.  
Use your MultiMidiaCard digital  
device to format or delete files.  
The current FlashPath does  
not have the nine-pin connec-  
tor required to access Secure  
Digital cards.  
You will need an approved  
Secure Digital device to  
access SD cards. The  
FlashPath-MMC is designed  
for MultiMediaCards.  
The FlashPath works with  
MultiMediaCards, but does not  
seem to recognize SD  
(Secure Digital) cards.  
Page 10  
Delkin Devices User’s Manual  
 
Specifications  
Specifications  
DD MFG Part Number:  
Compatible Cards:  
Compatible OS:  
DDFLSPTH2-AD  
MultiMediaCard up to 128MB capacity  
Windows 95/98/2000/ME/NT4.0 and Apple Mac  
OS 7.5.1+  
Host Interface:  
Transfer Rate:  
Internal 3.5” (1.44MB) floppy disk drive  
*Approximately 100 KB/s sustained Read,  
50 KB/s sustained Write.  
Batteries:  
CR2016 (x2) Lithium  
Dimensions:  
90mm (W) x 94mm (L) x 3.3mm (H)  
1.23 oz. (Incl. Card & battery)  
FCC B, CE  
Weight:  
Certifications:  
Operational Environment:  
Temp: +10 to +40°C  
Humidity: 20% to 80% (non-condensing)  
*Transfer rates will vary between different media and computer systems.  
 
ONE YEAR PRODUCT WARRANTY  
Delkin Devices, Inc. (DDI) warrants that this product has been thoroughly tested  
and is free from defects in material and workmanship. This warranty is expressly  
limited to product repair, modification, or replacement, at the sole discretion of DDI.  
The maximum liability for any aspect of this warranty will be limited to an amount  
not exceeding the original product purchase price.  
This warranty is contingent upon proper use of the product in the application for  
which it is intended and does not cover any product that has been modified, mis-  
used, neglected or subjected to unusual physical stress. DDI will not repair or  
replace products that fail solely because their estimated ‘life’ has expired.  
The defective product must be returned to DDI. All shipping costs/ shall be the  
responsibility of the purchaser. State and local laws may apply.  
You will need a Return Merchandise Authorization (RMA) number before you return  
the product. Please contact DDI for assistance in getting an RMA number.  
Disclaimer  
Except as provided herein, there are no express or implied warranties of mer-  
chantability or fitness for a particular purpose. Under no circumstances will DDI be  
liable in any way for any damages, including but not limited to lost revenue, lost  
wages, or any other incidental or consequential damages arising from the use of or  
inability to use this product.  
The warranty set forth above is exclusive and no other warranty, whether written or  
oral, is expressed or implied.  
Delkin reserves the right to change specifications of hardware, software and  
instructions without notice.  
Delkin Devices does not extend warranty to batteries. If batteries are supplied with  
the product, it is as a convenience only, and as such, are covered by the battery  
manufacturer’s warranty.  
100% COMPATIBLE GUARANTEE  
All Delkin Devices products are 100% guaranteed compatible with OEM machines  
for which they are designed.  
TECHNICAL SUPPORT  
Delkin Devices can provide technical assistance with installation of a Delkin  
Devices product. Any phone/e-mail charges are the responsibility of the purchaser.  
CONTACTING DELKIN DEVICES  
For Technical Support or Warranty information you can contact Delkin Devices by:  
• phone at 858-391-1234 (9:00AM to 5:00PM PST Mon-Fri)  
• e-mail at [email protected].  
• on the web at http://www.delkin.com  
 

Closet Maid Outdoor Storage 12075 User Manual
Compaq Network Router mar345 User Manual
Conair Hair Clippers GMT302ACS User Manual
Cooper Lighting Landscape Lighting 50 400W User Manual
Cuisinart Oven TOB 195 User Manual
Cyber Acoustics MP3 Docking Station CA 461 User Manual
Ducane HVAC Air Conditioner EC1P User Manual
Fisher Price Baby Toy 77492 User Manual
Gardena Trimmer THS 400 User Manual
Geemarc Telephone AMPLI1100 User Manual