EV Rider Speaker EVF 1152S 94 User Manual

EVF-1152S/94  
Single 15” Two-Way  
90° x 40° Full-Range  
Loudspeaker System  
Key Features:  
ND2B 2” (51mm) Diaphragm, 1.4” (36mm) Exit  
Pure Titanium Compression Driver  
SMX2151 15” (381mm) LF Transducer with Fully  
Symmetric Drive  
Advanced 4th Order Crossover Network with HF  
Protection  
Coverage Pattern: 90° x 40° Constant  
DirectivityTM 12” Rotatable Waveguide  
101 dB Sensitivity, 134 dB Maximum SPL  
System Rating: 500W Continuous, (2000W Peak)  
Active Rating: LF400W/HF40W Continuous  
(1600W/160W Peak)  
(22) M10 Threaded Suspension Points  
PI Version Available with Gland Nut and Stain-  
less Steel Grille  
General Description:  
Technical Specifications:  
The Electro-Voice® EVF-1152S/94 is a high power, 2-way loud-  
speaker system that can be used in a variety of applications where  
high quality sound reinforcement is required in a compact, light-  
weight package.  
Freq. Response1 (-3 dB): 70 Hz - 14 kHz  
Freq. Range1 (-10 dB): 41 Hz - 18 kHz  
Rec. Hipass Frequency: 45 Hz  
Axial Sensitivity: 101 dB (1W/1m)  
Max. Calculated SPL: 134 dB  
The EVF-1152S/94 utilizes the ND2B, a high output 2” titanium  
compression driver, coupled to a Constant Directivity™ 90° x 40°  
waveguide. The SMX2151 15” woofer used FEA optimization for  
motor, suspension, and electrical design for very low distortion,  
high efficiency, and maximum intelligibility at high SPL levels. The  
crossover uses steep 24 dB/octave slopes with equalization for  
very smooth response in vocal range, linear off-axis response, and a  
protection circuit for long term reliability.  
Horizontal Coverage: 90° (or 40°)  
Vertical Coverage: 40° (or 90°)  
Power Handling: 500W Continuous, 2000W Peak  
LF Transducer: SMX2151, 15 in (381mm) Driver  
HF Transducer: ND2B, 2 in (51mm) Diaphragm  
Compression Driver  
The EVF-1152S/94 features make it ideal for many fixed install appli-  
cations. The trapezoidal enclosure is constructed out of weather re-  
sistant birch, and coated with EVCoatTM for maximum protection from  
the elements. The unique acoustic and rigging design allows for  
vertical and horizontal clusters to be built using any combination of  
loudspeakers from the entire EVF & EVH Series, with 7 horn patterns  
to choose from and an assortment of Low Frequency and subwoofer  
loudspeakers, it gives you the tools to maximize flexibility of system  
design, no matter what the application and budget. The innovative  
input panel provides choice of phoenix style connector (included in  
all standard models) or the ability to add; a dual NL4 type connector  
cover plate or gland nut cover plate (for weatherizing applications).  
An externally accessible jumper selects passive or active operation.  
An available 70.7/100 Volt transformer kit simply mounts to the input  
panel for use in distributed systems. All these features give you the  
flexibility to do a large range of venues with fewer items in inventory  
and quickly support your customer’s requirements.  
Crossover Frequency: 1450 Hz  
Nominal Impedance: 8 Ohms  
Minimum Impedance: 6.0 Ohms  
Connectors: (2) 4 Contact 10  
AWG Phoenix/  
PI Version -  
Gland Nut with  
Included Input  
Panel Cover  
EuroBlock Style  
Screw Terminal  
Enclosure Material: 13 Ply Weather Resistant Birch  
Grille: 16 GA Galva-  
nneal, Powder-  
coat, with Rotat-  
able Logo  
PI Version -  
Stainless Steel  
with Hydropho-  
bic Cloth  
Suspension: (22) M10 Threaded Points  
Dimensions (H x W x D): 30.26” x 18.50” x 18.37”  
(768.6mm x 469.8mm x 466.6mm)  
Net Weight: 70.9 lb (32.1 kg)  
Shipping Weight: 81.2 lb (36.8 kg)  
1 Half Space Measurement.  
 
Engineering Data Sheet  
Polar Plots (1/3 Octave):  
400 Hz  
500 Hz  
1.25 KHz  
3.15 KHz  
8 KHz  
630 Hz  
800 Hz  
1 KHz  
2.5 KHz  
6.3 KHz  
16 KHz  
1.6 KHz  
2 KHz  
4 KHz  
5 KHz  
10 KHz  
12.5 KHz  
20 KHz  
Horizontal = Black  
Vertical = Grey  
 
Dimension Drawings:  
End View  
Front View  
Side View  
Rear View  
EVF-1152S/94 Part Numbers  
• PRD000208-001 EVF-1152S/94-BLK, 90° x 40°, Black Finish  
• PRD000208-002 EVF-1152S/94-WHT, 90° x 40°, White Finish  
• PRD000208-003 EVF-1152S/94-PIB, 90° x 40°, Black Finish,  
Weather Resistant  
• PRD000208-004 EVF-1152S/94-PIW, 90° x 40°, White Finish,  
Weather Resistant  
• PRD000208-005 EVF-1152S/94-FGB, 90° x 40°, Black Finish,  
Weather Resistant Fiberglass  
CAUTION  
This EVF Loudspeaker should be suspended overhead  
only in accordance with the procedures and limitations  
specified in the EVF/EVH Users Manual and possible  
manual update notices. This system should be suspended  
with certified rigging hardware by an authorized rigging  
professional and in compliance with local, state, and fed-  
eral overhead suspension ordinances.  
• PRD000208-006 EVF-1152S/94-FGW, 90° x 40°, White Finish,  
Weather Resistant Fiberglass  
Performance Match  
Accessories  
• PRD000199  
• PRD000200  
• PRD000201  
• PRD000202  
• PRD000203  
• PRD000204  
• PRD000205  
• PRD000206  
• PRD000207  
• PRD000209  
• PRD000210  
• PRD000211  
• PRD000212  
• PRD000213  
• F.01U.076.843  
• F.01U.076.844  
• D170469  
EVF-1122S/64, 60° x 40° Coverage  
EVF-1122S/66, 60° x 60° Coverage  
EVF-1122S/94, 90° x 40° Coverage  
EVF-1122S/96, 90° x 60° Coverage  
EVF-1122S/99, 90° x 90° Coverage  
EVF-1122S/126, 120° x 60° Coverage  
EVF-1152S/43, 40° x 30° Coverage  
EVF-1152S/64, 60° x 40° Coverage  
EVF-1152S/66, 60° x 60° Coverage  
EVF-1152S/96, 90° x 60° Coverage  
EVF-1152S/99, 90° x 90° Coverage  
EVF-1121S, 12” Bass Element  
EVF-1151S, 15” Bass Element  
EVF-1181S, 18” Bass Element  
CPS2.9, 120V Power Amplifier, 2 x 900W  
CPS2.12, 120V Power Amplifier, 2 x 1200W  
CPS4.5, 120V Power Amplifier, 4 x 500W  
CPS4.10, 120V Power Amplifier, 4 x 1000W  
• ACC000084-000 CDNL4, Cover Plate, Dual NL4  
• ACC000085-000 CSG, Cover Plate, Single Gland Nut  
• ACC000086-000 CDG, Cover Plate, Dual Gland Nut  
• ACC000087-000 TK-150, 70V Transformer, 150W  
• ACC000089-001 HRK-1B, Horiz. Rigging Kit, EVF, Black  
• ACC000089-002 HRK-1W, Horiz. Rigging Kit, EVF, White  
• ACC000090-001 HRK-2B, Horiz. Rigging Kit, EVF-SUB, Black  
• ACC000090-002 HRK-2W, Horiz. Rigging Kit, EVF-SUB, White  
• ACC000091-001 HRK-3B, Horiz. Rigging Kit, EVH, Black  
• ACC000091-002 HRK-3W, Horiz. Rigging Kit, EVH, White  
• ACC000092-001 VRK-1B, Vert. Rigging Kit, EVF, Black  
• ACC000092-002 VRK-1W, Vert. Rigging Kit, EVF, White  
• ACC000093-001 VRK-2B, Vert. Rigging Kit, EVF-SUB, Black  
• ACC000093-002 VRK-2W, Vert. Rigging Kit, EVF-SUB, White  
• ACC000094-001 VRK-3B, Vert. Rigging Kit, EVH, Black  
• ACC000094-002 VRK-3W, Vert. Rigging Kit, EVH, White  
• D170466  
U.S.A. and Canada only. For customer orders, contact Customer Service at:  
800/392-3497 Fax: 800/955-6831  
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:  
+ 49 9421-706 0 Fax: + 49 9421-706 265  
Electro-Voice®  
12000 Portland Avenue South, Burnsville, MN 55337  
Phone: 952/884-4051, Fax: 952/884-0043  
Other Internatonal locations. For customer orders, Contact Customer Service at:  
+ 1 952 884-4051 Fax: + 1 952 887-9212  
For warranty repair or service information, contact the Service Repair department at:  
800/685-2606  
© Bosch Communications Systems  
04/2009  
For technical assistance, contact Technical Support at: 866/78AUDIO  
Part Number LIT000342094 Rev A  
Specifications subject to change without notice.  
 

Clarion CD Player DXZ865MP User Manual
Compaq Network Card AA RNG2A TE User Manual
Craftsman Automobile Parts 87550242 User Manual
Crate Amplifiers Speaker System G1600XL User Manual
Curtis DVD Player DVD6019 B User Manual
Curtis Home Theater System DVD1073 User Manual
Dacor Microwave Oven AMTK27 User Manual
Earthquake Sound Car Speaker EQ8S8 User Manual
Extron electronic Network Card MTP 15HD RSA User Manual
Fundex Games Games Sea Battle User Manual