Electro Voice Speaker System PX1152M User Manual

PX1152M  
15” Two-Way Dual  
Manifolded HF  
90° x 45° Full Range  
Loudspeaker System  
Key Features:  
Dual ND2 2Voice Coil, 1Exit Neodymium  
Compression Drivers  
DVX3151 15” LFTransducer with Forced Air  
Cooling  
Very High Sensitivity, 134 dB Maximum SPL  
Ultra-Compact, Low Profile, Multipurpose  
Design  
90° x 45° Coverage Pattern  
600W Continuous (2400W Peak) Power  
Handling  
Passive/BiampSelectable  
Integral Rigging Point for VSA-1 Strong Arm  
Pole Mount forTripod Use  
General Description:  
Technical Specifications:  
The Electro-Voice® PX1152M is a versatile fullrange, 2-  
way floor monitor loudspeaker system that is part of the  
Electro-Voice® Phoenix Series and is intended for high  
output sound reinforcement in a large range of portable  
sound applications. The PX1152M is capable of being  
configured as either passive or biamp, and can be used  
fullrange for stage monitor applications or used with a  
subwoofer as a very compact system with extended low  
frequency capability.  
Freq. Response1 (-3 dB): 70 Hz - 15 kHz  
Freq. Range1 (-10 dB): 50 Hz - 19 kHz  
Rec. Hipass Frequency: 45 Hz  
Axial Sensitivity1: 100 dB (1W/1m)  
Max Calculated SPL1: 134 dB  
Horizontal Coverage: 90°  
Vertical Coverage: 45°  
Power Handling (Passive): 600W Continuous, 2400W Peak  
LF Power Handling (Biamp): 500W Continuous, 2000W Peak  
HF Power Handling (Biamp): 80W Continuous, 320W Peak  
LF Transducer: (1) DVX3151, 15 in. (381mm) Driver  
The PX1152M uses the DVX3151 woofer, a high  
efficiency 15-inch woofer with forced air cooling. Dual  
ND2-16 compression drivers are precisely summed in a  
manifold for increased power handling, maximum SPL,  
and low distortion. The very low distortion 90° x 45° horn  
provides optimal coverage in the PX1152M’s  
configurations. The enclosure is constructed of 18-mm,  
13-ply plywood, using tongue and groove joints and  
EVCoatTM for long term durability.  
HF Transducers: (2) ND2-16, 2 in. (50mm) Diaphragm  
Compression Drivers  
Crossover Frequency: 1400 Hz  
Impedance (Passive): 8 Ohms Nominal  
LF Impedance (Biamp): 8 Ohms Nominal  
HF Impedance (Biamp): 8 Ohms Nominal  
Connectors: (3) Neutrik Speakon NL4's  
Enclosure Material: 18mm Plywood with Black EVCoatTM  
As a stage monitor, the PX1152M provides symetrical left  
and right 60° monitor angles, and NL4 connectors on  
each side of the enclosure for connecting multiple  
monitors. An integrated rigging point allows for  
installation on a truss using the VSA-1 strong arm  
accessory.  
Suspension: Rigging Point for VSA-1 Strong Arm  
Accessory  
Grille: Polyester Powder Coated, 16GA  
Galvanized Steel, with Rotatable Logo  
Dim (H x W x D): 610mm x 442mm x 329mm  
(24.00" x 17.42" x 12.97")  
Net Weight: 25.1 kg (55.3 lbs)  
Shipping Weight: 28.2 kg (62.1 lbs)  
1 Half Space measurement.  
 

Craftsman Brush Cutter 358798260 32cc User Manual
Craftsman Tiller 91729604 User Manual
Cuisinart Toaster TOB 50BC User Manual
Dukane Welder 403570 01 User Manual
Dyna Lite Landscape Lighting T4222 PS User Manual
Everpure Water System CGT 10S User Manual
Extron electronic Stereo Amplifier MDA 3AV RCA User Manual
Fellowes Paper Shredder P 58Cs User Manual
Fender Musical Toy Instrument 2016 Limited User Manual
GE Network Card EPM5200P User Manual