Top Load Washer
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
27"
(686 mm)
251/2"
(648 mm)
ETW4100S, ETW4400V, ETW4400W
Electrical: A 120 volt, 60 Hz., AC only,
42"
(1067 mm)
15- or 20-amp, fused electrical supply is required.
A time-delay fuse or circuit breaker is recommended.
It is recommended that a separate circuit serving
only this appliance be provided.
RECESSED AREA OR CLOSET INSTALLATION
DRAIN SYSTEM OPTIONS
For closet installation, with a door, the minimum ventilation openings in
the top and bottom of the door are required. Louvered doors with
equivalent air ventilation openings are acceptable.
Wall standpipe drain system
3"
(76 mm)
Floor drain system
48 in.2
14" max.
(356 mm)
(310 cm2)
19"
(483 mm)
24 in.2
(155 cm2)
Minimum diameter for a wall or floor standpipe drain: 2" (51 mm).
Minimum carry-away capacity: 17 gal (64L) per minute. Top of standpipe
must be at least 39" (991 mm) high; install no higher than 96" (2.4 m)
from bottom of washer. A sump pump system is required for higher
installations.
4"
(102 mm)
1"
(25 mm)
0"
3"
(0 mm)
(76 mm)
Laundry tub drain system
Minimum capacity: 20 gal (76 L). Top of laundry tub must be at least
39" (991 mm) above floor; install no higher than 96" (2.4 m) from
bottom of washer.
Floor drain system
Floor drain systems require a Siphon Break Kit (Part No. 280129)
and additional drain hose (Part No. 3357090). Minimum siphon break:
28" (711 mm) from bottom of washer. Additional hoses might be needed.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10200890-D-ES
06/2009
|