Dynex Switch DX GB8PRT User Manual

DX-GB8PRT_10-1124_QSG_V1.eps  
1
10/299/2010  
1:05::26 PM  
V1  
FINAL  
FOR PRINT  
Congratulations on your purchase of the DX-GB8PRT Dynex 8-Port  
Gigabit Ethernet Switch. The DX-GB8PRT provides increased speed and  
backbone connections to make Gigabyte a reality.  
Installing the switch  
1 Connect the power adapter to the switch and power outlet.  
Power cord  
Safety Notices  
Power  
• Do not use this product near water, for example, in a wet basement  
or near a swimming pool.  
Switch  
outlet  
• Avoid using this product during an electrical storm. There may be a  
remote risk of electric shock from lightning.  
• Do not place heavy objects on the switch.  
• Allow room for adequate ventilation.  
2 Connect the PC(s) and other device(s) to the switch.  
DX-GB8PRT  
8-Port Gigabit Ethernet Switch  
Package contents  
PC  
Switch  
Network  
storage  
DX-GB8PRT Dynex 8-Port Gigabit Ethernet Switch  
Quick Setup Guide  
3 Connect the switch to the Internet.  
Features  
Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p  
standards  
Internet  
Eight 10/100/1000M RJ45 ports  
Supports IEEE 802.1p QoS  
Support Green Ethernet technology to implement power saving  
features. (In Low Power Idle mode, up to 66.22% of the power can be  
saved.)  
Internet  
Modem  
Router  
Switch  
4 Install complete connection.  
Internet  
Supports IEEE 802.3x flow control for full-duplex mode and  
backpressure for half-duplex mode  
Non-blocking switching architecture that forwards and filters  
packets at full wire-speed for maximum throughput  
8K entry MAC address table of the DX-GB8PRT with auto-learning  
and auto-aging  
Network  
storage  
Switch  
Router  
PC  
Modem  
Supports for Jumbo frames of up to 15 KB  
LED indicators for monitoring power, link, and activity  
LED indicators  
When the switch is plugged in and receiving power, the LED indicators  
respond as follows:  
Components  
Front panel  
LED  
Status  
Indication  
Power  
On (green)  
Off  
Power on  
No device is connected to the corresponding port.  
A 10/100 Mbps device is connected to the corresponding port.  
On (orange)  
Link/Act Flashing (orange) A 10/100 Mbps device is transmitting or receiving data  
Ports 1-8  
through the corresponding port.  
Power LED  
LEDs 1-8  
Back panel  
A 1000Mbps device is connected to the corresponding port.  
On (green)  
A 1000Mbps device is transmitting or receiving data through  
the corresponding port.  
Flashing (green)  
Power port  
Ports 1-8  
QUICK SETUP GUIDE  
 

Esoteric CD Player SA 50 User Manual
FieldServer Computer Drive FS 8704 12 User Manual
Fisher Price Baby Accessories R9949 User Manual
FMI Indoor Fireplace FMH26TN User Manual
Fundex Games Games Bunco User Manual
GarrettCom Switch Magnum ST80 User Manual
GE Washer WWA8810M User Manual
Gianni Industries Door DG 5 User Manual
Gitzo Camcorder Accessories GT1531 User Manual
Global Machinery Company Saw MPS184M User Manual