Eagle Electronics Speaker ET AR504LR B User Manual

User Manual  
Model: ET-AR504LR-BK  
2.1 Soundstage Speakers with Subwoofer  
 
3. Product Overview  
16  
15  
13  
14  
12  
11  
TRE+  
1
TRE-  
RESET  
MUTE  
17  
18  
AUDIO INPUT  
BASS+  
MAST+  
2
3
4
5
6
8
9
BASS-  
MAST-  
AUDIO OUTPUT  
10  
7
POWER SOURCE  
19  
1. Status LED  
7. Power cord  
14. Bass-  
Displays Volume, Treble, Bass, EQ  
Connects to 110V AC outlet  
Decreases bass level  
2. Menu  
8. Audio input 1  
15. Tre+  
Switches functions: Volume, Treble or  
Auxiliary 3.5mm plug  
Increases treble level  
Bass  
9. Audio input2  
16. Tre-  
3. Up arrow  
Standard RCA plug  
Decreases treble level  
Increases volume or adjusts selected  
10. Power switch  
17. Reset  
menu function  
Turns speakers on/oꢀ  
Resets Bass and Treble settings to  
factory default  
4. Down arrow  
11. Mast+  
Decrease volume or adjusts selected  
Increases master volume  
18. Mute  
menu function  
Turns on/oꢀ master volume  
12. Mast-  
5. Left arrow  
Decreases master volume  
19. Battery compartment  
Selects previous menu function  
Insert battery with letter facing up  
13. Bass+  
6. Right arrow  
Increases bass level  
Selects next menu function  
 
4. Product Setup  
1. Connect the 3.5mm end of audio cable  
to your music device.  
2. Connect the RCA end of audio cable  
to back of the system. Only one  
audio input may be used at a  
time.  
AUDIO INPUT  
1
2
OR  
3. Connect the power cord to an  
110V AC outlet.  
AUDIO OUTPUT  
4. Turnonthe powerand slowly  
increase the volume until reaching  
acomfortable level.  
POWER SOURCE  
4
3
5. Adjust treble or bass as needed.  
 
5. Understanding LCD Display  
1. Mute Indicator  
Indicates if the system mute has been  
turned on or oꢀ  
6. Treble Adjustment Indicator  
Indicates if the system is being set to  
Treble Adjustment Mode  
Mute  
CD  
Volume  
Treble  
Bass  
1
2
3
4
5
6
7
8
AUX  
2. CD Input Indicator  
(models with CD input)  
7. Bass Adjustment Indicator  
Indicates if the system is being set to  
Bass Adjustment Mode  
Indicates if the system is currently  
using the CD input  
8. Subwoofer Indicator  
3. Auxiliary Input Indicator  
(models with Aux input)  
Indicates if subwoofer is in use  
Indicates if the system is currently  
using the Aux input  
4. Power On Indicator  
Indicates if the system is turned  
on or oꢀ  
SUB WOOFER  
5. Volume Indicator  
Indicates if the system is being set to  
Volume Adjustment Mode  
 
6. Using Front Panel Controls  
(Volume Bass Treble Equalizer)  
1. The LCD area displays your current selection.  
2. Press the Menu button until you have selected your desired  
function. Press the Up or Down arrow to change the setting  
 
7. Using the wireless Remote  
Adjusting Volume/Mute using Remote Control  
1. Press Mast+ button to increase volume level and Mast- button to decrease volume level.  
2. Press Mute to turn on/off master volume. Press again to resume previous volume level.  
Adjusting Treble/Bass using Remote Control  
1. Press Tre+ button to increase bass level and Tre- button to decrease bass level.  
2. Press Bass+ button to increase volume level and Bass- button to decrease volume level.  
Resetting EQ Levels using Remote Control  
1. Press Reset button to reset all EQ levels to factory default.  
TRE+  
TRE+  
TRE+  
TRE-  
TRE-  
TRE-  
RESET  
MUTE  
RESET  
MUTE  
RESET  
MUTE  
BASS+  
MAST+  
BASS+  
MAST+  
SS+  
ST+  
BASS-  
AST-  
-  
MAST-  
M
Adjusting Volume/Mute using Remote Control  
Adjusting Treble/Bass using Remote Control  
Resetting EQ Levels using Remote Control  
 
8. Optimum Settings  
1. For best reception, always point the remote control at the LCD display area. The re-  
mote control’s effective range is approximately 10ft.  
2. For best tonal fidelity, we recommend setting your audio source to line level output and  
use the speaker to control overall volume level.  
3. For best tonal fidelity, we recommend using the default EQ levels so you hear the music  
at exactly the same way it was recorded. The easiest way to do this is by pressing the  
Reset button located on the remote control.  
4. This speaker system is most efficient when the volume level is set between 30% to 80%.  
You get highest sound quality and minimum distortion within these volume levels.  
5. Place the satellite speakers at least 16 inches from each other. This enhances stereo  
sound effect and perceived sound field.  
6. Provide ample space around the subwoofer unit. It needs enough room to move massive  
amount of air! To further enhance lower frequencies, place the subwoofer unit near walls.  
 
9. Specification  
Total RMS Power:  
35 Watts  
-Satellites:  
10 Watts RMS x 2  
(into 4 ohms, @ <=1% THD)  
15 Watts RMS x 1  
(into 4 ohms, @ <=1% THD)  
70 Watts  
-Subwoofer:  
Total Peak Power:  
• Frequency Response:  
20Hz to 20kHz  
• Drivers:  
-Satellites:  
Dual 3-inch midrange and  
1-inch tweeter with solid wood enclosure  
5.25-inch drivers with solid wood enclosure  
-Subwoofer:  
• Speaker Dimension  
(H x W x D):  
-Satellites:  
4.33” x 9.65” x 4.77”  
6.7” x 11.03” x 10.25”  
-Subwoofer:  
 
10. Regulatory Compliance  
FCC Class B Information  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful in-  
terference in a residential installation. However, there is no guarantee that interference will not occur in a  
particular installation.  
CE Compliance for Europe  
This equipment has been tested and found to comply with the limits for European Council Directive on the  
approximation of the law of the member states relating to electromagnetic compatibility (89/336/EEC) ac-  
cording to EN55022 Class B.  
11. Limited Warranty  
Eagle Tech warrants that the product, in the course of its normal use, will be free from defects in material  
and workmanship for a period of one (1) year. This limited warranty period shall commence on the pur-  
chase date appearing on your purchase receipt. Eagle Tech shall have no liability for any product returned  
if Eagle Tech determines that the product was not purchased from authorized retailers, that the asserted  
defect a) is not present, b) cannot reasonably be rectified because of damage occurring before Eagle Tech  
receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing  
or obliterating labels and opening or removing parts. The foregoing warranty shall extend to repaired or  
replaced products for the remaining of the applicable period of the original warranty or ninety (90) days  
from the date of shipment of a repaired or replaced product, whichever is longer.  
 
12. Contacting Us  
Customer Service  
FAQ  
RMA  
Eagle Tech Computers, Inc.  
17531 Railroad St. Ste D  
City of Industry, CA 91748  
USA  
Phone: 626.956.4040  
Fax: 626.810.4820  
© 2008 Eagle Tech Computers, Inc. All rights reserved. Eagle Tech, the Eagle Tech logo and other Eagle  
Tech marks are owned by Eagle Tech and may be registered. All other trademarks are the property of their  
respective owners.  
 
Eagle Tech Computers, Inc.  
Phone: 626.956.4040  
Fax: 626.810.4820  
 

Electro Voice Portable Speaker EVS 1300 User Manual
Evo Fitness Elliptical Trainer REV 400 User Manual
Extron electronic Stereo Amplifier CVDA 6 EQ MX User Manual
GE Convection Oven PK956BM User Manual
GE Dishwasher PDWT502VII User Manual
Gemini Speaker RS 408 User Manual
GE Monogram Dishwasher ZBD0710 User Manual
GE Nail Gun 6KBU300 Braking Unit User Manual
GE TV Converter Box F485 User Manual
Gigabyte Personal Computer 7VM400AM RZ User Manual