Extron electronic Network Router Demonstration Kit User Manual

Setup Guide for AVTracDemonstration Kit  
The AVTrac Demonstration Kit shows how the AVTrac system meets customers' application needs. The kit components  
can be unpacked from the carrying box as shown in the figures below. To repack the kit, reverse the steps.  
The illustrations below show the US version of the AVTrac Demonstration kit. The International and Universal  
models are similar in size and packaging, but contain a single AC outlet, which may be connected to double insulated  
power cable, or flex conduit without wires.  
N
If the box is to be reused, remember to save  
the packing foam.  
N
Pre-cut  
Carpet Pieces (2)  
This kit is for demonstration  
W
purposes only. The AC power module is not  
wired to distribute power and must not be  
connected to an electrical power source.  
1.  
Remove carpet pieces.  
2.  
Remove top foam and foam  
covering side ramps.  
Connectivity Box (1)  
End Ramps (2)  
3.  
Remove side and end ramps.  
AC Conduit (1)  
Side Ramps (2)  
4.  
Remove track pieces and  
connectivity box with AC  
conduit.  
Carpet Finish  
Cover Track (1)  
Rubber finish  
Cover Track (1)  
Base Track (1)  
68-1530-01  
Rev. B 02 09  
 

Eclipse Fujitsu Ten Car Stereo System CD3100 User Manual
First Alert Smoke Alarm SA320CN User Manual
Fisher Price High Chair W4120 User Manual
Ford Automobile 2010 E 150 User Manual
Fujitsu Printer FTP 633MCL400 User Manual
Garmin Automobile Accessories 190 01771 00_0A User Manual
Gemini CD Player CD 4700 PRO II User Manual
Gitzo Camcorder Accessories G1227G User Manual
Gitzo Camcorder Accessories G1320 User Manual
Gitzo Camcorder Accessories G2220 User Manual