Frigidaire Cooktop 318200633 User Manual

Electric  
Cooktop  
Welcome .................................. 2  
ImportantSafetyInstructions .. 3-4  
Setting Surface Controls .... 4-7  
Surface Cooking..................... 8  
Care & Cleaning................. 9-10  
Before You Call  
Questions?  
S.o.l.u.t.io.n..s..t.o..................................... 11  
1-800-944-9044 (United States)  
1-800-668-4606 (Canada)  
Common Problems  
Visit the Frigidaire Elements Web Site at:  
Warranty ................................ 12  
READ AND SAVE THESE INSTRUCTIONS  
318200633 (0604) Rev. A  
 
Important Safety Instructions  
Read all instructions before using this appliance.  
Save these instructions for future reference.  
This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all  
instructions given.  
This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.  
This symbol will help alert you to situations that may cause bodily injury or property damage.  
• Remove all tape and packaging wrap before using the  
appliance. Destroy the carton and plastic bags after  
unpackingtheappliance.Neverallowchildrentoplaywith  
packagingmaterial.  
orletclothingorotherflammablematerialstouchtheseareas  
until they have had sufficient time to cool. Among these  
areas are the cooktop and areas facing the cooktop.  
• WearProperApparel.Loose-fittingorhanginggarments  
should never be worn while using the appliance. Do not  
let clothing or other flammable materials contact hot  
surfaces.  
• Proper Installation. Be sure your appliance is properly  
installed and grounded by a qualified technician in  
accordance with the National Electrical Code No. 70 -  
latest edition in the United States, or CSA C22.1, Part 1  
in Canada, and local code requirements. Install only per  
installationinstructionsprovidedintheliteraturepackagefor  
this appliance.  
Never use your appliance for warming or  
heating the room.  
• DoNotUseWaterorFlouronGreaseFires.Smotherthe  
fire with a pan lid, or use baking soda, a dry chemical or  
foam-typeextinguisher.  
Askyourdealertorecommendaqualifiedtechnicianandan  
authorized repair service. Know how to disconnect the  
electricalpowertotheapplianceatthecircuitbreakerorfuse  
box in case of an emergency.  
• Whenheatingfatorgrease,watchitclosely.Fatorgrease  
may catch fire if allowed to become too hot.  
• User Servicing. Do not repair or replace any part of the  
appliance unless specifically recommended in the  
manuals. All other servicing should be done only by a  
qualified technician to reduce the risk of personal injury and  
damage to the appliance.  
• UseOnlyDryPotholders. Moistordamppotholderson  
hot surfaces may result in burns from steam. Do not let  
the pot holders touch hot surface units. Do not use a towel  
or other bulky cloth instead of a pot holder.  
• Do Not Heat Unopened Food Containers. Buildup of  
pressure may cause the container to burst and result in  
injury.  
• Never modify or alter the construction of an appliance  
such as removal of panels, wire covers or any other  
permanent part of the appliance.  
IMPORTANT.Donotattempttooperatethecooktopduring  
a power failure. If the power fails, always turn off the  
cooktop. If the cooktop is not turned off and the power  
resumes,thecooktopwillnotoperateandanerrormessagewill  
be displayed.  
• StorageonAppliance. Flammablematerialsshouldnot  
be stored near surface units. This includes paper, plastic  
andclothitems,suchascookbooks,plasticwareandtowels,  
as well as flammable liquids. Do not store explosives, such  
as aerosol cans, on or near the appliance. Flammable  
materialsmayexplodeandresultinfireorpropertydamage.  
IMPORTANT SAFETY INSTRUCTIONS FOR  
USINGYOUR COOKTOP  
• Know which knob controls each surface unit.  
Do not store items of interest to children in  
the cabinets above the appliance. Children climbing on the  
cooktop to reach items could be seriously injured.  
• Clean the appliance regularly to keep all parts free of  
greasethatcouldcatchfire.Exhaustfanventilationhoods  
and grease filters should be kept clean. Do not allow grease  
to accumulate on hood or filter. Greasy deposits in the fan  
couldcatchfire. Whenflamingfoodunderthehood, turnfan  
on. Refer to hood manufacturer's instructions for cleaning.  
• Do not leave children alone. Children should not be left  
aloneorunattendedintheareawhereanapplianceisin  
use.Theyshouldneverbeallowedtositorstandonanypart  
of the appliance.  
• DO NOT TOUCH SURFACE UNITS OR AREAS NEAR  
THESE UNITS. Surface units may be hot even though they  
are dark in color. Areas near surface units may become hot  
enough to cause burns. During and after use, do not touch,  
Use Proper Pan Size. This appliance is equipped with one  
or more surface units of different sizes. Select utensils  
having flat bottoms large enough to cover the surface unit.  
3
 
Important Safety Instructions  
The use of undersized utensils will expose a portion of the • Do Not Use Decorative Surface Element Covers. If an  
surface heating unit to direct contact and may result in  
ignition of clothing. Proper relationship of utensil to element  
will also improve efficiency.  
element is accidentally turned on, the decorative cover will  
become hot and possibly melt. Burns will occur if the hot  
covers are touched. Damage may also be done to the  
appliance.  
• Utensil Handles Should Be Turned Inward and Not  
ExtendOverAdjacentSurfaceUnits.Toreducetheriskof  
burns, ignition of flammable materials, and spillage due to  
unintentional contact with the utensil.  
FOR CERAMIC-GLASS COOKTOP ONLY  
• Do Not Clean or Operate a Broken Cooktop. If cooktop  
should break, cleaning solutions and spillovers may  
penetrate the broken cooktop and create a risk of electric  
shock. Contact a qualified technician immediately.  
• Never Leave Surface Units Unattended. Boilovers cause  
smoking and greasy spillovers that may ignite, or a pan that  
has boiled dry may melt.  
• Clean Cooktop with Caution. If a wet sponge or cloth is  
used to wipe spills on a hot cooking area, be careful to avoid  
a steam burn. Some cleaners can produce harmful fumes if  
applied to a hot surface.  
• Protective Liners. Do not use aluminum foil to line any part  
oftheappliance.Onlyusealuminumfoilasrecommendedfor  
baking if used as a cover placed on the food. Any other use  
of protective liners or aluminum foil may result in a risk of  
electric shock or fire or short circuit.  
• DoNotPlaceHotCookwareonColdCooktopGlass.This  
could cause glass to break.  
• Glazed Cooking Utensils. Only certain types of glass,  
glass/ceramic, ceramic, earthenware, or other glazed  
utensils are suitable for range top service without breaking  
• Do not slide pan across the cooktop surface. They may  
scratch the cooktop surface.  
due to the sudden change in temperature. Check the • Do Not Let Pans Boil Dry. This may cause permanent  
manufacturer's recommendations for cooktop use.  
damage in the form of breakage, fusion, or marking that can  
affect the ceramic-glass cooktop. (This type of damage is  
not covered by your warranty).  
IMPORTANTSAFETYNOTICE  
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of  
substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn  
customers of potential exposure to such substances.  
Setting Surface Controls  
About the Ceramic Glass Cooktop  
The ceramic cooktop has radiant surface elements located below the surface of the  
glass. The design of the ceramic cooktop outlines the area of the surface element  
underneath. Make sure the diameter of the pan matches the diameter of the element  
outline on the cooktop (See Figs. 1 & 2).  
Heat is transferred up through the surface of the cooktop to the cookware. Only flat-  
bottomcookwareshouldbeused.Thetypeandsizeofcookware,thenumberofsurface  
elements in use and their settings are all factors that will affect the amount of heat that  
willspreadtoareasbeyondthesurfaceelements.Theareassurroundingtheelements  
may become hot enough to cause burns.  
Fig.1 - 30” Model - Cooktop  
Appearance  
About the Radiant Surface Elements  
expandable  
element  
The element temperature rises gradually and evenly. As the temperature rises, the  
element will glow red. To maintain the selected setting, the element will cycle ON and  
s
p
e
e
d
e
OFF.Theheatingelementretainsenoughheattoprovideauniformandconsistentheat  
l
e
b
e
r
i
d
m
g
e
e
n
ex  
l
p
e
a
m
n
e
d
n
a
t
b
l
e
m
l
e
t
e
e
n
t
during the OFF cycle. For efficient cooking, turn OFF the element several minutes  
ELEMENT ON  
Center  
Rear  
Left  
Front  
Right  
Front  
Left  
Rear  
Right  
Rear  
before cooking is complete. This will allow residual heat to complete the cooking  
process.  
Fig. 2 - 36” Model - Cooktop Appearance  
4
 
Setting Surface Controls  
locations of the surface radiant elements  
Your cooktop is equipped with radiant surface radiant elements with different wattage  
ratings.Theabilitytoheatfoodquickerandinlargervolumesincreasesastheelement  
wattageincreases.  
The radiant surface elements are located on the 30” cooktop as follows:  
- 1 dual 6 to 9 inch radiant element located at the right front position;  
- 1 bridge radiant element located on the left front and rear positions;  
- 1 small 6 inch radiant element located at the right rear position.  
30” cooktop  
The radiant surface elements are located on the 36” cooktop as follows:  
- 1 small 6 inch radiant elements located at the center rear position;  
- 1 dual 5 to 7 inch radiant elements located at the right rear position;  
- 1 dual 6 to 9 inch radiant elements located at the right front position;  
- 1 bridge radiant element located on the left front and rear positions;  
expandable  
element  
s
p
e
e
d
e
l
e
b
e
r
i
d
m
g
e
e
n
ex  
l
p
e
a
m
n
e
d
n
a
t
b
m
l
e
t
e
e
n
t
ELEMENT ON  
Center  
Rear  
Left  
Front  
Right  
Front  
Left  
Rear  
Right  
Rear  
Surface cooking settings  
Use the chart to determine the correct setting for the type of food you are preparing.  
Note: The size and type of cookware used will influence the setting needed for best  
cooking results.  
36” cooktop  
Recommended Settings for Surface Elements  
Setting  
Type of Cooking  
HIGH(HI)  
Start most foods; bring water to a boil and pan broiling.  
MEDIUMHIGH(8-10) Continue a rapid boil; frying, deep fat frying.  
MEDIUM(6) Maintain a slow boil; thicken sauces and gravies; steaming  
vegetables.  
MEDIUM LOW (2 - 4) Keep foods cooking; poaching and stewing.  
LOW(LO) Keep warm, melting and simmering.  
NOTE: PleasereaddetailedinstructionsforceramicglasscooktopcleaningintheGeneralCare&CleaningsectionandBefore  
You Call checklist section of this Use and Care Guide.  
NOTE: Radiant elements have a limiter that allows the element to cycle on and off, even at the HI setting. This helps to prevent  
damage to the ceramic smooth top. Cycling at the HI setting is normal and can occur if the cookware is too small for the radiant  
element or if the cookware bottom is not flat (Refer to page 12 under Selecting Surface Cooking Utensils).  
NOTE: Due to the high intensity of heat generated by the surface elements, the glass surface will turn green when the  
element will be turned off.This phenomenon is normal and the glass will come back to its original white color after it has  
completely cooled down. (White glass cooktops only).  
5
 
Setting Surface Controls  
The electronic surface element control (esec)  
TheElectronicSurfaceElementControl(“ESEC”)featureincludes  
5 digital display windows. The ESEC feature provides a numeric  
digital setting for the 5 radiant surface element positions on the  
cooktop. These settings work the same way as normal knob  
setting indicators work except the settings are displayed in digital  
windows (Figs. 1 thru 4).  
Fig. 1  
Fig. 2  
Fig. 4  
The available ESEC Display Settings  
The ESEC control provides various heat levels from Hi (Fig. 2) to  
Lo (Fig. 4) and OFF (Fig. 1). The settings between 9.5 and 3.0  
decrease or increase in increments of .5 (1/2). The settings  
between 3.0 and 1.2 are Simmer settings which decrease or  
increase in increments of .2 (1/5) to Lo (Figure 4; lowest Simmer  
setting) for more precise settings at lower heat levels. Use the  
Recommended Surface Setting Chart to determine the correct  
setting for the kind of food you are preparing.  
.
Fig. 3  
Control knobs shown are typical only.  
Note: The size and type of cookware used will influence  
the setting needed for best cooking results.  
ESEC Power Failure Indicator Message (PF)  
When the range is first plugged in or when the power supply to the range has been interrupted, the ESEC control  
will display the message "PF" (Power Failure; See Fig. 5). After a few seconds the "PF" message will disappear  
from the display.  
Fig. 5  
Fig. 6  
ESEC Error Indicator Message (Er)  
Anerrormessagewillbedisplayed(glowingEr)atpowerup(orafterapowerfailure)ifANYofthesurfacecontrol  
knobs were left in the ON positions (See Fig. 6). If a power failure should occur, be sure to set all of the surface  
control knobs to the OFF position. This will reset the surface controls.  
Once the surface controls have been set to the OFF positions, the surface controls should return to normal  
operation.Ifthesurfacecontrolsdonotfunctionand theErmessageremainsinanydisplayafterfollowingthese  
procedures, contact your authorized servicer for assistance.  
ESEC Hot Element Indicator Message (HE)  
Afterusinganyofthesingle, dualortripleradiantelementpositionsthecooktopwillbecomevery  
hot. Even after turning the control knob to OFF, the cooktop will remain hot for some time. The  
ESEC control monitors the temperature of the cooktop and displays the message “HE” (hot  
element)warningwhenthecooktopisstilltoohottotouch(SeeFig.7).IftheHEmessageappears  
in the window, the control can still be turned ON again for use.  
Fig. 7  
Operating the Single Surface Radiant Elements  
The cooktop has a single radiant surface element located as shown on Figures 8 & 9.  
To Operate the Single Surface Element  
expandable  
element  
1. Place correctly sized cookware on the radiant surface element.  
2. Push in and turn the surface control knob in either direction to the desired setting using  
the ESEC digital display window to verify (Fig. 2). Turn the knob to adjust the setting as  
needed.  
s
p
e
e
d
e
l
e
b
e
r
i
d
m
g
e
e
n
ex  
l
p
e
a
m
n
e
d
n
a
t
b
l
e
m
l
e
t
e
e
n
t
ELEMENT ON  
Left  
Front  
Center  
Rear  
Right  
Front  
Left  
Rear  
Right  
Rear  
3. Start most cooking operations on a higher setting and then turn to a lower setting to finish  
cooking. Each surface element provides a constant amount of heat at each setting. A  
glowing red surface heating area extending beyond the bottom edge of the cookware  
indicates the cookware is too small for the surface heating area.  
4. When cooking has completed, turn the surface control knob to OFF before removing the  
cookware. Note: The surface “Element On” indicator lights will glow when one or more  
elements are turned on. A quick glance at these indicator lights when cooking is finished  
is an easy check to be sure all surface elements are turned off. Also, the HE message will  
appear in the display after turning the control knob to OFF if the cooktop is still hot and  
remain on until the heating surface area has cooled sufficiently.  
Fig. 8  
Fig. 9  
6
 
Setting Surface Controls  
Operating the Dual Surface Radiant  
Elements  
expandable  
element  
30” cooktop is equipped with dual radiant elements at the  
right front position (see Fig. 1). 36” cooktop is equipped  
with dual radiant surface elements located at the right  
front and right rear positions (See Fig 2).  
s
p
e
e
d
e
l
e
b
e
r
i
d
m
g
e
e
n
ex  
l
p
e
a
m
n
e
d
n
a
t
b
l
e
m
l
e
t
e
e
n
t
ELEMENT ON  
Center  
Rear  
Left  
Front  
Right  
Front  
Left  
ear  
Right  
Rear  
To Operate the Dual Surface Element:  
1. Place correctly sized cookware on the dual surface element.  
Fig. 1  
Fig. 2  
2. Push in and turn the control knob counterclockwise (See Figs. 3 & 5) for smaller cookware  
or clockwise (See Figs. 4 & 6) for larger cookware to the desired setting using the ESEC  
digital display window for the desired setting.  
3. Turn the knob to adjust the setting as needed. Start most cooking operations on a higher setting  
and then turn to a lower setting to finish cooking. Each surface element provides a constant  
amount of heat at each setting. A glowing red surface heating area extending beyond the bottom  
edge of the cookware indicates the cookware is too small for the surface heating area.  
4. When cooking has completed, turn the surface control knob to OFF before removing  
the cookware. Note: The surface “Element On” indicator lights will glow when one or  
more elements are turned on. A quick glance at these indicator lights when cooking is  
finished is an easy check to be sure all surface elements are turned off. Also, the HE  
message will appear in the display after turning the control knob to OFF if the cooktop is  
still hot and remain on until the heating surface area has cooled sufficiently.  
Fig. 3  
Fig. 5  
Fig. 6  
Fig. 4  
Note: See recommended Setting for Surface Element table on page 5.  
Radiant surface elements may appear to have cooled after they have been  
turned OFF. HE (Hot Element) message will turn ON and will continue to glow until the glass  
cooktop has cooled down to a moderate level. The glass surface may still be hot and burns  
may occur if the glass surface is touched before the indicator light has turned OFF.  
Operating the Bridge Radiant Element  
This cooktop is equipped with a "Bridge" surface  
element located at the left front and middle (see  
Figs 7 & 8) positions. The Bridge can be used  
when cooking with rectangular (like a griddle) or  
oval shaped cookware (Fig. 8) The element will  
maintain an even temperature setting across  
both portions of the Bridge. If needed for normal  
Fig. 7  
Fig. 8  
(30" cooktop model shown only)  
Fig. 9  
cookware, the bridge element can work like a  
single element without the Bridge (Fig.7).  
To Operate the Dual Surface Element:  
1. Place correctly sized cookware on the Bridge surface element.  
2. Push in and turn the control knob counterclockwise (See Figs. 5 & 7) to heat the portion of the Bridge element for  
normal shaped cookware or clockwise (See Figs. 6 & 8) for larger or rectangular shaped cookware.  
3. Use the ESEC digital display window for the desired setting. Turn (do not push) the knob to adjust the setting as  
needed. Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. Each  
surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending  
beyond the bottom edge of the cookware indicates the cookware is too small. Please note that not all cookware will fit  
the Bridge element correctly.  
4. When cooking has completed, turn the surface control knob to OFF before removing the cookware. Note: The surface  
Element On” indicator lights will glow when one or more elements are turned on. A quick glance at these indicator  
lights when cooking is finished is an easy check to be sure all surface elements are turned off. Also, the HE message  
will appear in the display after turning the control knob to OFF if the cooktop is still hot and remain on until the heating surface  
area has cooled sufficiently.  
The bridge element may also be used in combination with the left rear single element. Because these element have 2  
different controls, one element can be used to cook while the other element may be used to keep food warm (see Fig. 9).  
7
 
Surface cooking  
Selecting Surface Cooking Cookware  
Cookware should have flat bottoms  
thatmakegoodcontactwiththeentire  
surface heating element. Check for  
flatness by rotating a ruler across the  
bottomofthecookware(SeeFigure1).  
Besuretofollowtherecommendations  
forusingcookwareasshowninFigure  
2.  
Note: The size and type of cookware  
used will influence the setting needed  
for best cooking results.  
Figure 1  
Figure 2  
Cookware Material types  
Thecookwarematerialdetermineshowevenlyandquicklyheatistransferredfromthesurfaceelementtothepanbottom. The  
most popular materials available are:  
ALUMINUM - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists  
staining & pitting). If aluminum pans slide across the ceramic glass cooktop, they may leave metal marks which will resemble  
scratches. Remove these marks immediately.  
COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic glass (see Aluminum above).  
STAINLESS STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.  
CAST IRON - A poor heat conductor however will retain heat very well. Cooks evenly once cooking temperature is reached.  
Not recommended for use on ceramic cooktops.  
PORCELAIN-ENAMEL on METAL - Heating characteristics will vary depending on base material. Porcelain-enamel coating  
must be smooth to avoid scratching ceramic cooktops.  
GLASS - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it may scratch the glass.  
8
 
Ca(rCele&aninCglCehaanrti)ng  
Cleaning Various Parts of Your Cooktop  
Beforecleaninganypartofthecooktop, besureallcontrolsareturnedOFFandthecooktopisCOOL. REMOVESPILLOVERS  
AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING WILL REDUCE THE NUMBER OF MAJOR  
CLEANINGLATER.  
Surfaces  
How to Clean  
Aluminum (Trim Pieces)  
Use hot, soapy water and a cloth or paper towel. Dry with a clean cloth.  
Painted and Plastic  
Control Knobs, Body Parts,  
andDecorativeTrim  
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar  
and water. Follow by rinsing the area with clean water; dry and polish with a soft cloth.  
Glass cleaners may be used if sprayed on a soft cloth first. DO NOTsprayliquidsdirectly  
onthecontrolpadanddisplayarea.Donotuselargeamountsofwateronthecontrolpanel  
- excess water on the control area may cause damage to the appliance. Do not use other  
liquidcleaners,abrasivecleaners,scouring pads,orsomepapertowels-theywilldamage  
the finish.  
ControlPanel  
Wipe the control panel clean after each use. Before cleaning the control panel, turn all  
controls to OFF and remove the control knobs. To remove, pull each knob straight off the  
shaft.Cleanusinghot,soapywaterandacloth.Besuretosqueezeexcesswaterfromthe  
cloth before wiping the panel; especially when wiping around the controls. Excess water  
in or around the controls may cause damage to the appliance. To replace knobs after  
cleaning,lineuptheflatsidesofboththeknobandtheshaft;thenpushtheknobintoplace.  
Stainless Steel, Chrome  
(brushed)  
DecorativeTrimCooktop  
Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and  
a cloth. Do not use cleaners with high concentrations of chlorides or chlorines. Do  
notuseharshscrubbingcleaners. Onlyusekitchencleanersthatareespeciallymadefor  
cleaning stainless steel. Always be sure to rinse the cleaners from the surface as bluish  
stains may occur during heating that cannot be removed.  
Ceramic-Glass  
See Ceramic-Glass Cooktop in this Owner's Guide.  
Cooktop  
9
 
Care & Cleaning  
Ceramic Glass Cooktop Cleaning & Maintenance  
Consistent and proper cleaning is essential to maintaining your Ceramic glass cooktop  
Prior to using your cooktop for the first time, apply the recommended CERAMA BRYTE® Cleaning Creme to the ceramic  
surface. Cleanandbuffwithanonabrasiveclothorpad. Thiswillmakecleaningeasierwhensoiledfromcooking. Thespecial  
cooktop cleaning cream leaves a protective finish on the glass to help prevent scratches and abrasions.  
Sliding aluminum or copper clad bottom pans on the cooktop can cause metal markings  
onthecooktopsurface.Thesemarksshouldberemovedimmediatelyafterthecooktop  
hascooledusingthecooktopcleaningcream.Metalmarkscanbecomepermanentifnot  
removed prior to future use.  
Cookware(castiron,metal,ceramicorglass)withroughbottomscanmarkorscratchthe  
cooktopsurface. Donotslideanythingmetalorglassacrossthecooktop. Donotuse  
yourcooktopasacuttingboardorworksurfaceinthekitchen. Donotcookfoodsdirectly  
on the cooktop surface without a pan. Do not drop heavy or hard objects on the glass  
cooktop, or they may crack it.  
Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL.  
DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can  
chemically damage the ceramic glass surface.  
Cleaning Recommendations for the Ceramic Glass Cooktop  
For light to moderate soil:  
Apply a few drops of CERAMA BRYTE® Cleaning Creme directly to the cooktop. Use a paper towel or a Multi-  
Purpose No Scratch Scrub Sponge to clean the entire cooktop surface. Make sure the cooktop is cleaned  
thoroughly, leaving no residue. Do not use the sponge you use to clean the cooktop for any other purpose.  
For heavy, burned on soil:  
First, clean the surface as described above. Then, if soils remain, carefully scrape soils with a metal razor blade  
scraper, holding scraper at a 30 degree angle to the surface. Remove loosened soils with  
cooktop cleaning cream and buff surface clean.  
Damage to the ceramic glass cooktop may occur if you use any scrub pad  
other than a Multi-Purpose No Scratch Scrub Sponge.  
Plastic or foods with a high sugar content:  
These types of soils need be removed immediately if spilled or melted onto the ceramic  
cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur if  
not removed immediately. After turning the surface elements OFF, use a razor blade  
scraperorametalspatulawithamittandscrapethesoilfromthehotsurface(asillustrated).  
Allow the cooktop to cool, and use the same method for heavy or burned on soils.  
Do not use the following on the ceramic glass cooktop:  
• Do not use abrasive cleaners and scouring pads, such as metal and some nylon  
pads. They may scratch the cooktop, making it more difficult to clean.  
• Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as  
they may etch or discolor the cooktop.  
• Donotusedirtysponges,clothsorpapertowels,astheycanleavesoilorlintonthe  
cooktop which can burn and cause discoloration.  
Special Caution for Aluminum Foil and Aluminum Cooking Utensils  
Aluminum foil: Use of aluminum foil will damage the cooktop. Do not use under any  
circumstances.  
Aluminumutensils:Sincethemeltingpointofaluminumismuchlowerthanthatofother  
metals, care must be taken when aluminum pots or pans are used. Pans that boil dry may  
permanently damage cooktop by breaking, fusing to, or marking it.  
10  
 
Before you call  
Solutions to Common Problems  
OCCURRENCE  
POSSIBLECAUSE/SOLUTION  
Entire cooktop does not  
operate.  
(1)Housefusehasblownorcircuitbreakerhastripped.Check/resetbreakerorreplacefuse.Ifthe  
problem is a circuit overload, have this situation corrected by a qualified electrician. (2) Service  
wiringnotcomplete. Contactinstallationagentordealer. (3)Poweroutage. Checkhouselightsto  
be sure. Call local electric company.  
Surface element does not  
heat.  
(1)Nopowertoappliance.Check/resetbreakerorreplacefuse.Iftheproblemisacircuitoverload,  
or improper connection of the armored cable supplied with the appliance, have this situation  
correctedbyaqualifiedelectrician.(2)Toolowheatsetting.Turncontroltoaslightlyhighersetting  
until element comes on. (3) Incorrect control is on. Be sure to use correct control for the element  
to be used.  
Surface element too hot or  
not hot enough.  
(1) Incorrect control setting. Raise or lower setting until proper amount of heat is obtained. Dial  
markings are an indicator of relative heat settings and will vary slightly. (2) Lightweight or warped  
pans being used. Use only flat, evenly balanced, medium or heavyweight cookware. (3) Voltage  
is incorrect. Be sure appliance is properly connected to the specified power source. (4) Use only  
flat bottom, evenly balanced, medium or heavyweight cookware. Pans having a flat bottom heat  
betterthanwarpedpans.Cookwarematerialaffectsheating.Heavyandmediumweightpansheat  
evenly. Because lightweight pans heat unevenly, foods may burn easily.  
Food not heating evenly.  
(1)Impropercookware.Selectflat-bottomedcookwareofapropersizetofitelement.(2)Incorrect  
control setting. Raise or lower setting until proper amount of heat is obtained.  
Scratches or abrasions on  
ceramicglasscooktop  
surface.  
(1)Coarseparticles(suchassaltorsand)arebetweencooktopandutensil.Besurecooktopsurface  
andbottomofutensilsarecleanbeforeuse.Smallscratchesdonotaffectcookingandwillbecome  
lessvisiblewithuse.(2)Cleaningmaterialsnotrecommendedforglassceramiccooktophavebeen  
used.SeeCeramic-GlassCooktop sectioninthisOwner'sGuide.(3)Cookwarewithroughbottom  
hasbeenused.Useflat-bottomed,smoothutensils.SeeSelectingSurfaceCookingUtensilsin  
thisOwner'sGuide.  
Metal marks on ceramic  
glasscooktopsurface.  
(1)Slidingorscrapingofmetalutensilsoncooktopsurface.Donotslidemetalutensilsoncooktop  
surface. Use a mildly abrasive cleanser to remove marks.  
Brownstreaksandspecks  
on ceramic glass cooktop  
surface.  
(1) Boilovers have cooked onto surface. Use razor blade scraper to remove soil. See Ceramic-  
Glass Cooktop section in this Owner's Guide. (2) Cleaning materials not recommended for  
ceramic-glasscooktophavebeenused. Userecommendedcleanersandcleaningmethod. See  
Ceramic-Glass Cooktop section in this Owner's Guide.  
Areas of discoloration on  
ceramicglasscooktop  
surface.  
(1)Mineraldepositsfromwaterandfood.Wetsurfacewithwaterandsprinkleonacooktopcleaning  
creme.Scrubwithacleandamppapertoweluntilthestaindisappears.Wiperemainingpasteaway,  
then apply a small amount of cooktop cleaning creme and polish with a clean paper towel. Use  
cookwarewithclean, drybottoms. See Ceramic-GlassCooktop sectioninthisOwner'sGuide.  
11  
 
Major Appliance Warranty Information  
Your appliance is covered by a one year limited warranty. For one year from your original date of  
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be  
defective in materials or workmanship when such appliance is installed, used and maintained in  
accordance with the provided instructions.  
Exclusions  
This warranty does not cover the following:  
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.  
2. Product that has been transferred from its original owner to another party or removed outside the USA or  
Canada.  
3. Rust on the interior or exterior of the unit.  
4. Products purchased "as-is" are not covered by this warranty.  
5. Food loss due to any refrigerator or freezer failures.  
6. Products used in a commercial setting.  
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances  
not in ordinary household use or used other than in accordance with the provided instructions.  
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.  
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards,  
shelves, etc., which are not a part of the appliance when it is shipped from the factory.  
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or  
knobs, handles, or other cosmetic parts.  
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip  
charges, or mileage expense for service calls to remote areas, including the state of Alaska.  
12. Damages to the finish of appliance or home incurred during installation, including but not limited to  
floors, cabinets, walls, etc.  
13. Damages caused by: services performed by unauthorized service companies; use of parts other than  
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or  
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.  
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES  
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT  
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,  
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE  
LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE  
YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH  
AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS  
WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR  
LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS  
MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY  
ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.  
If You Need  
Service  
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period  
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.  
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone  
numbers below.  
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances  
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp.  
Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under  
this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as  
described or illustrated are subject to change without notice.  
USA  
Canada  
1.800.944.9044  
Electrolux Major Appliances  
North America  
1.800.668.4606  
Electrolux Canada Corp.  
5855 Terry Fox Way  
P.O. Box 212378  
Augusta, GA 30907  
Mississauga, Ontario, Canada  
L5V 3E4  
 

FEIN Power Tools Vacuum Cleaner 9 55 13 User Manual
Field Controls Air Conditioner CAC 120 User Manual
FireplaceXtrordinair Indoor Fireplace 44 DV XXL EF User Manual
Fisher Paykel Cooktop CT280 User Manual
Fisher Price Motorized Toy Car L3938 User Manual
Fluke Home Safety Product Ti20 User Manual
Fluke Ventilation Hood 68X Series User Manual
FujiFilm Digital Camera 16162434 User Manual
Gemini CD Player CD 2000X User Manual
Gemini Stereo Amplifier GXA 1600 User Manual