GE Door 19204 User Manual

GE Model 19204/19218  
Wired Push Button  
This button is not recommended for use on systems which exceed 16 volts.  
Included hardware:  
(2) 3x20mm screws  
Installation  
Push buttons are typically mounted at the same height above the door sill as the  
door knob or handle (between 36” and 44” above the sill).  
Taking out the back cover of the push button:  
1. Locate the two door chime wires emanating from the existing door chime  
circuit.  
2. Test the door chime by touching the two wires together, completing the circuit.  
If the door chime does not sound, check the chime transformer or chime.  
3. Turn off power.  
4. Attach one wire to each of the screw terminals on the back of the button.  
5. Mount the button in the desired location with two (2) screws provided. Install  
according to applicable local electrical codes.  
6. Close the back cover.  
 

Eiki Projector 3970A User Manual
Electro Voice Music Mixer 8108 User Manual
Excalibur electronic Board Games NF 07 User Manual
Finisar Network Card Surveyor User Manual
Fishman Blender Aura User Manual
Frigidaire Air Conditioner FRS09PYC11 User Manual
Frigidaire Dishwasher FGID2474QF User Manual
GE Universal Remote 24991 User Manual
GE Waffle Iron 840101500 User Manual
GE Washer G161 User Manual