GE Monogram Washer ZBD6605 User Manual

Owners  
Manual  
Chef’s Washer  
ZBD6605  
ZBD6905  
ZBD7005  
ZBD7105  
 
Consumer Information  
Chef’s Washer  
Read this manual carefully. It is intended  
to help you operate and maintain your new  
Chef’s Washer properly.  
If you don’t understand something or need  
more help, there is a list of toll-free consumer  
service numbers included in the back section  
of this manual.  
Before  
using  
your  
Chef’s  
Washer  
Keep it handy for answers to your questions.  
OR  
Visit our Website at: monogram.com  
You can find the model and serial numbers  
at the inside upper left tub flange.  
Before sending in this card, please write these  
numbers here:  
Write  
down the  
model &  
serial  
Model Number  
numbers  
Serial Number  
Use these numbers in any correspondence or  
service calls concerning your Chef’s Washer.  
Immediately contact the dealer (or builder)  
that sold you the Chef’s Washer.  
If you received  
a damaged  
Chef’s Washer  
Before you request service, check the Problem  
Solver in the back of this manual.  
It lists causes of minor operating problems that  
you can correct yourself.  
Save time  
& money  
To obtain service, see the Consumer Services  
page in the back of this manual.  
For customers in Canada:  
If you  
need service  
FIRST, contact the people who serviced your  
appliance. Explain why you are not pleased.  
In most cases, this will solve the problem.  
We’re proud of our service and want you to be  
pleased. If for some reason you are not happy  
with the service you receive, here are steps to  
follow for further help.  
NEXT, if you are still not pleased, write all the  
details–including your phone number–to:  
For customers in the USA:  
Manager, Consumer Relations  
Camco Inc.  
1 Factory Lane, Suite 310  
Moncton, N.B. E1C 9M3  
FIRST, contact the people who serviced your  
appliance. Explain why you are not pleased.  
In most cases, this will solve the problem.  
NEXT, if you are still not pleased, write all the  
details–including your phone number–to:  
Manager, Customer Relations  
GE Appliances  
Appliance Park  
Louisville, KY 40225  
3
 
IMPORTANT SAFETY INSTRUCTIONS  
MESURES DE SÉCURITÉ IMPORTANTES  
WARNING!  
For your safety, the information in this manual  
must be followed to minimize the risk of fire,  
• Do not store or use combustible materials,  
gasoline or other flammable vapors and liquids  
in the vicinity of this or any other appliance.  
• Do not allow children to play inside, on or with  
this appliance or any discarded appliance.  
explosion, electric shock, or to prevent property  
damage, personal injury or loss of life.  
• Do not tamper with controls.  
• Do not abuse, sit on, or stand on the door or  
dish rack of the Chef’s Washer.  
• Do not discard a Chef’s Washer without first  
removing the door or removing the door latch.  
• Do not allow children to play around the Chef’s  
Washer when opening and closing the door due  
to possibility of small fingers being pinched in  
the door.  
AVERTISSEMENT  
!
Pour votre sécurité, veuillez suivre à la lettre les  
directives données dans le présent manuel afin  
de réduire les risques d’incendie, d’explosion ou  
de chocs électriques, et prévenir les dommages  
matériels et les blessures graves ou mortelles.  
• N’entreposez pas et n’utilisez pas d’essence,  
de vapeurs ou de liquides inflammables à  
proximité de cet appareil ou de tout autre  
électroménager.  
• Ne laissez pas les enfants jouer avec le lave-  
vaisselle du chef ni monter dessus. Ne les  
laissez pas s’introduire à l’intérieur de cet  
appareil ou d’un vieil appareil qui ne sert plus.  
• Ne modifiez pas le fonctionnement des  
commandes.  
• Ne montez pas ou ne vous assoyez pas sur la  
porte ou les paniers du lave-vaisselle du chef,  
et ne les utilisez pas de façon abusive.  
• Ne jetez pas un lave-vaisselle du chef sans  
en avoir d’abord enlevé la porte ou enlevez  
le verrou de la porte.  
Ne permettez jamais à des enfants de jouer  
à proximité d’un lave-vaisselle du chef quand  
vous ouvrez ou fermez la porte. Ils peuvent  
se coincer les doigts dans la porte.  
WARNING! RISK OF CHILD ENTRAPMENT  
PROPER DISPOSAL OF THE CHEF’S WASHER  
A junked or abandoned Chef’s Washer is  
dangerous…even if it will sit for “just a  
few days.” If you are getting rid of your old  
Chef’s Washer, please follow the instructions  
below to help prevent accidents.  
Door latch  
keeper  
Before You Throw Away Your Old Chef’s Washer:  
Take off the door of the washing  
compartment or remove the door latch  
keeper (as shown).  
AVERTISSEMENT! RISQUE D’ENFANT MIS AU PIÈGE  
BONNE DISPOSITION DU LAVE-VAISSELLE DU CHEF  
Le lave-vaisselle du chef abandonné ou jeté est  
dangereux...même s’il est abandonné «juste  
pendant quelques jours». Si vous jetez votre  
vieux lave-vaisselle du chef, veuillez suivre les  
instructions suivantes pour prévenir tout  
accident.  
Réceptacle  
à verrou  
Avant de jeter votre vieux lave-vaisselle du chef :  
• Enlevez la porte du compartiment de lavage  
ou enlevez le réceptacle à verrou (comme  
l’indique l’illustration).  
4
 
WATER HEATER SAFETY  
Under certain conditions hydrogen gas may be  
If the hot water has not been used for two  
weeks or more, prevent the possibility of  
damage or injury by turning on all hot water  
faucets and allowing them to run for several  
minutes. Do this before using any electrical  
appliance which is connected to the hot water  
system. This simple procedure will allow any  
built-up hydrogen gas to escape. Since the gas  
is flammable, do not smoke or use an open  
flame or appliance during this process.  
produced in a water heater that has not been  
used for two weeks or more. HYDROGEN  
GAS IS EXPLOSIVE.  
SÉCURITÉ DU CHAUFFE-EAU  
Dans certaines conditions, il peut se former de  
l’hydrogène à l’intérieur d’un chauffe-eau qui  
n’a pas servi pendant deux semaines ou plus.  
L’HYDROGÈNE EST UN GAZ EXPLOSIF.  
Pour réduire les risques de dommages ou de  
blessures lorsque l’eau chaude n’a pas été  
utilisée depuis deux semaines ou plus, ouvrez  
tous les robinets d’eau chaude et laissez l’eau  
couler pendant plusieurs minutes avant  
d’utiliser un appareil électrique raccordé au  
système d’eau chaude. Vous éliminerez ainsi  
l’hydrogène qui pourrait s’y être accumulé.  
Puisqu’il s’agit d’un gaz inflammable, ne fumez  
pas ou n’utilisez pas une flamme nue au cours  
de ce processus.  
5
 
IMPORTANT SAFETY INSTRUCTIONS  
MESURES DE SÉCURITÉ IMPORTANTES  
PROPER INSTALLATION AND MAINTENANCE  
This Chef’s Washer must be properly installed  
and located in accordance with the Installation  
Instructions before it is used. If you did not  
receive an Installation Instructions sheet with  
your Chef’s Washer, you can receive one by  
• Dispose of discarded appliances and shipping  
or packing material properly.  
• Do not attempt to repair or replace any part  
of your Chef’s Washer unless it is specifically  
recommended in this manual. All other  
servicing should be referred to a qualified  
technician.  
visiting our Website at monogram.com  
.
• Connect to a grounded metal, permanent  
wiring system; or run an equipment-  
grounding conductor with the circuit  
conductors and connect to the equipment-  
grounding terminal or lead of the appliance.  
• To minimize the possibility of electric shock,  
disconnect this appliance from the power  
supply before attempting any maintenance.  
NOTE: Turning the Chef’s Washer off does  
not disconnect the appliance from the power  
supply. We recommend having a qualified  
technician service your appliance.  
• Improper connection of the equipment-  
grounding conductor can result in a risk of  
electric shock. Check with a qualified  
electrician or service representative if you are  
in doubt whether the appliance is properly  
grounded.  
INSTALLATION ET ENTRETIEN APPROPRIÉS  
Avant de l’utiliser, vous devez installer  
correctement ce lave-vaisselle du chef  
conformément aux directives d’installation  
fournies. Si vous n’avez pas reçu une feuille  
de directives d’installation avec votre lave-  
vaisselle du chef, vous pouvez en obtenir un  
exemplaire par visiter notre site Web à l’adress  
monogram.com.  
• Jetez de la façon appropriée les vieux  
électroménagers, ainsi que le matériel  
d’emballage et d’expédition.  
• Ne tentez pas de réparer ou de remplacer  
toute pièce de votre lave-vaisselle du chef,  
à moins que cela ne soit spécifiquement  
recommandé dans le présent manuel. Confiez  
toutes les autres réparations à un réparateur  
qualifié.  
• Cet appareil doit être relié à un système de  
câblage électrique permanent, mis à la terre.  
Sinon, un fil de mise à la terre pour  
appareillage doit être installé et raccordé à la  
borne ou au fil de mise à la terre de l’appareil.  
• Afin de réduire les risques de chocs électriques,  
débranchez toujours l’appareil avant de le  
réparer. REMARQUE : Lorsque vous mettez  
la commande du lave-vaisselle du chef à OFF  
(arrêt), le courant qui alimente l’appareil n’est  
pas coupé. Nous vous recommandons de  
confier la réparation de votre appareil à un  
réparateur qualifié.  
• Un raccordement non approprié du fil  
de mise à la terre pour appareillage peut  
présenter des risques de chocs électriques.  
Si vous doutez de la qualité de la mise à la  
terre de votre électroménager, consultez un  
représentant du Service après-vente ou un  
électricien qualifié.  
6
 
WHEN USING YOUR CHEF’S WASHER  
Use this appliance only for its intended  
• Non-Dishware Items: Do not wash items such  
as electronic air cleaner filters, furnace filters  
and paint brushes in your Chef’s Washer.  
Damage to Chef’s Washer and discoloration  
or staining of Chef’s Washer may result.  
purpose as described in this Owner’s Manual.  
CAUTION:  
Contents washed  
in the Sanitization cycle may be hot to the  
touch. Use care before unloading.  
• Do not touch the heating element during  
or immediately after use.  
• Use only powder, tabs or liquid detergents  
or wetting agents recommended for use in  
a Chef’s Washer and keep them out of the  
reach of children.  
• Do not operate your Chef’s Washer unless  
all enclosure panels are properly in place.  
• Close supervision is necessary if this  
appliance is used by or near children.  
• Locate sharp items so that they are not  
likely to damage the door seal.  
• Load light plastic items so they will not  
become dislodged and drop to the bottom  
of the Chef’s Washer–they might come into  
contact with the heating element and  
be damaged.  
• Load sharp knives with the handles up  
to reduce the risk of cut-type injuries.  
• Do not wash cookware unless marked  
dishwasher safe or the equivalent. For  
plastic items not so marked, check the  
manufacturer’s recommendations.  
READ AND FOLLOW THIS SAFETY  
INFORMATION CAREFULLY.  
SAVE THESE INSTRUCTIONS  
LORSQUE VOUS UTILISEZ VOTRE LAVE-VAISSELLE DU CHEF  
N’utilisez ce lave-vaisselle du chef que pour  
l’usage auquel il est destiné, comme expliqué  
dans le présent Manuel d’utilisation.  
ne portent aucune mention, lisez les  
recommandations du fabricant.  
• Articles divers : Ne lavez pas des articles comme  
les filtres à air électroniques, les filtres de  
fournaise et les pinceaux dans votre lave-vaisselle  
du chef. Ils pourraient endommager le lave-  
vaisselle du chef et décolorer ou tacher la cuve.  
MISE EN GARDE :  
matériaux lavés selon le cycle Sanitization  
peuvent être chauds. Faites attention quand  
vous videz votre machine.  
Les  
• Ne touchez pas à l’élément chauffant pendant  
ou immédiatement après le lavage.  
• N’utilisez que des détergents liquides, en  
poudre ou en pastilles et les produits de rinçage  
recommandés pour lave-vaisselle du chef. Gardez  
tous ces produits hors de portée des enfants.  
• Ne faites pas fonctionner votre lave-vaisselle du  
chef lorsque l’un de ses panneaux est enlevé.  
• Il faut exercer une étroite surveillance lorsque  
vous faites fonctionner le lave-vaisselle du chef  
en présence d’enfants.  
• Placez les articles aiguisés de manière à ce qu’ils  
n’endommagent pas le joint de la porte.  
• Placez les couteaux les poignées vers le haut afin  
de réduire les risques de coupures.  
• Placez les articles légers en plastique de façon  
qu’ils ne bougent pas ou ne tombent au fond de  
l’appareil pendant le lavage. Ils pourraient être  
endommagés s’ils entrent en contact avec  
l’élément chauffant.  
• Ne lavez pas d’articles en plastique dans le  
lave-vaisselle du chef, à moins qu’ils portent la  
mention lavable au lave-vaisselle ou toute mention  
équivalente. Lorsque les articles de plastique  
VEUILLEZ LIRE ET SUIVRE À LA LETTRE  
CES MESURES DE SÉCURITÉ.  
CONSERVEZ CES DIRECTIVES  
7
 
Control Panel – ZBD6605  
Chef’s Washer  
You can locate  
your model  
ZBD6605  
number on the  
inside upper  
tub flange.  
Throughout this  
manual, features  
and appearance  
may vary from  
your model.  
1
2
1. WASH CYCLES Knob–Use to select the desired wash cycle based on dishware and soil level.  
Control  
Settings  
HEAVY DUTY  
For pans or cookware with dried-on or baked-on soils.  
This cycle may not remove some burned-on foods.  
NORMAL WASH For loads of everyday cookware with medium soils. NOTE: For heavily soiled  
cookware, choose NORMAL WASH plus HIGH TEMP water temperature  
option.  
LIGHT WASH  
SPEED WASH  
For lightly soiled cookware.  
For recently used, lightly soiled cookware to be washed in a short time.  
Provides a wash with temperatures of up to 125°F (51°C).  
RINSE ONLY  
For rinsing partial loads that will be washed later. Do not use detergent  
with this cycle.  
2. HEAT OPTIONS Knob–Used to select water temperature and drying options.  
NORMAL  
Provides a wash and rinse with water temperatures up to 125°F (51°C) in  
LIGHT WASH, 135°F (57°C) in the NORMAL WASH cycle and 155°F (68°C)  
in HEAVY DUTY.  
HIGH TEMP.  
SANITIZE  
Provides a wash and rinse with water temperatures up to 160°F (71°C) in  
LIGHT WASH, NORMAL WASH and HEAVY DUTY. Not available for  
SPEED WASH, LIGHT WASH or RINSE ONLY cycles.  
Provides a sanitizing wash and rinse with water temperatures up to 160°F  
(71°C) in LIGHT WASH and 171°F (77°C) in NORMAL WASH and HEAVY  
DUTY. Not available for SPEED WASH or RINSE ONLY cycles. At the end  
of the cycle, the HEAT OPTIONS light will illuminate to indicate that the  
sanitization conditions have been met.  
E
NSF INTERNATIONAL  
Meets NSF Protocol for Performance of Domestic Spray-Type Pots  
and Pans Washing Machines (NSF Protocol P180) Requirements for  
cleaning and sanitization of cookware.  
NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.  
HEAT DRY  
When selected, turns the drying heater on for fast drying. The option will  
extend the cycle by 30 minutes. When this option is NOT selected, the  
fan will turn on to dry your dishes without added heat–energy is saved.  
HEAT DRY is not available on RINSE ONLY.  
8
 
Operation – ZBD6605  
Chef’s Washer  
To start the Chef’s Washer, close the door until it locks in place. To start the last selected cycles,  
press the START button. To select a different cycle, turn the knobs to the desired WASH CYCLE  
and HEAT OPTIONS and press the START button.  
Start a  
wash load  
NOTE: Not all heat options are available for all cycles. If a combination that is not available is  
selected, the lights will flash when the START button is pressed, and the cycle will not start.  
HEAT OPTIONS  
NORMAL  
& HEAT  
DRY  
HIGH  
SANITIZE  
(includes  
HIGH  
TEMP  
TEMP &  
Wash Cycles  
NORMAL  
HEAT DRY HEAT DRY)  
HEAVY DUTY  
NORMAL WASH  
LIGHT WASH  
SPEED WASH  
RINSE ONLY  
To interrupt/pause a cycle, gently open the door just enough to turn off the wash motor. Do not  
fully open the door until the wash action ceases.  
CAUTION: Be careful when opening the door; the hot steam that escapes when the door is  
opened may cause injuries. Stand back as you open the door and allow the steam  
to escape.  
ATTENTION : Faites attention lorsque vous ouvrez la porte. La vapeur brûlante qui  
s’échappe lorsque vous ouvrez la porte pendant un programme de lavage peut  
causer des brûlures. Lorsque vous ouvrez la porte, reculez et laissez la vapeur  
s’échapper de l’appareil.  
To restart the wash process, close the door until it locks in place. There may be a time delay of  
up to a few minutes because the temperature inside your Chef’s Washer needs to stabilize before  
it restarts the wash cycle.  
To cancel the cycle after it has started, press and hold the START/CANCEL button for 3 seconds.  
The Chef’s Washer will start to drain and the cycle indicator lights will flash. At this point a new  
wash cycle can be selected. If a new cycle is not selected, all the Cycle Indicator lights will go out  
after the Chef’s Washer drains completely. If you have selected a new wash cycle, remember to  
add more detergent to the detergent compartment if required.  
9
 
Control Panel – ZBD6905  
Chef’s Washer  
You can locate  
your model  
ZBD6905  
number on the  
inside upper  
tub flange.  
Throughout this  
manual, features  
and appearance  
may vary from  
your model.  
1
2
3
4
5
1. Cycle Status Indicators–This display tells you what is happening while the Chef’s Washer is in  
operation. All of the Cycle Status Indicators will flash on and off if either the door is opened  
during a cycle or if the cycle has been paused. Your wash is complete when the CLEAN light  
is illuminated.  
Control  
Settings  
SENSING  
Displayed when the dishwasher is monitoring temperature and water level  
during fill and drain.  
WASHING  
RINSING  
DRYING  
CLEAN  
Displayed during the prewash and main wash periods.  
Displayed during rinse periods.  
Displayed during the dry period (if SMART DRY is selected).  
Displayed when cycle is complete. Light remains ON until the door is opened.  
2. Cycle Selections–The light on the selected pad will illuminate to indicate which cycle has been  
selected.  
HEAVY DUTY  
For pans or cookware with dried-on or baked-on soils.  
This cycle may not remove some burned-on foods.  
NORMAL WASH For loads of everyday cookware with medium soils. NOTE: For heavily soiled  
cookware, choose NORMAL WASH plus HIGH water temperature option.  
LIGHT WASH  
RINSE ONLY  
For lightly soiled cookware or recently used, lightly soiled cooking  
utensils and cookware to be washed in a short time.  
For rinsing partial loads that will be washed later. Do not use detergent with  
this cycle.  
10  
 
Control Panel/Operation – ZBD6905  
Chef’s Washer  
3. SMART DRY–When selected, sensors detect the presence of rinse aid and the final rinse  
temperature. The drying heater and fan are then turned on for the minimum time to achieve  
optimum drying results, saving energy over conventional heated dry and time over non-heated  
dry. SMART DRY is not available on RINSE ONLY.  
4. WATER TEMP–This button provides extra heat options to increase water temperature for  
optimum performance.  
NORMAL  
This is the default setting–provides a wash and rinse with water temperatures  
up to 125°F (51°C) in the LIGHT WASH, 135°F (57°C) in the NORMAL  
WASH cycle and 155°F (68°C) in HEAVY DUTY.  
HIGH  
This water temp selection provides a wash and rinse with water temperatures  
up to 160°F (71°C) in LIGHT WASH, NORMAL WASH and HEAVY DUTY.  
Use this option for heavily soiled dishes. Cannot be used with RINSE ONLY.  
SANI  
This water temp selection provides a sanitizing wash and rinse with water  
temperatures up to 160°F (71°C) in LIGHT WASH and 171°F (77°C) in  
NORMAL WASH and HEAVY DUTY. Cannot be used with RINSE ONLY.  
At the end of the WASH cycle, the SANI OPTION light will remain illuminated  
to indicate that the sanitization conditions have been met.  
E
NSF INTERNATIONAL  
Meets NSF Protocol for Performance of Domestic Spray-Type Pots  
and Pans Washing Machines (NSF Protocol P180) Requirements for  
cleaning and sanitization of cookware.  
NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.  
5. DELAY START–This option will allow you to delay the start time of any wash cycle except  
RINSE ONLY for up to 6 hours.  
1. Select the delay start time you want by pressing the DELAY START button. Multiple pressing  
will alternate the delay time between 2, 4 or 6 hours and OFF.  
2. The last programmed cycle will automatically be selected. A new cycle and options can also  
be selected. The DELAY START light/lights will flash to indicate time selected.  
3. The flashing Delay Start Indicators show how many hours will elapse before washing begins.  
To start the Chef’s Washer, close the door until it locks in place. The last used cycle will be displayed.  
To begin this cycle, push the START button. To select a different cycle, push the desired Cycle  
Selection and Option buttons, and then press the START button.  
Start a  
wash load  
The door must be closed and latched into place to select a cycle or an option.  
To interrupt/pause a cycle, press the selected cycle button. The Status Indicators will flash.  
CAUTION: Be careful when opening the door; the hot steam that escapes when the door is  
opened may cause injuries. Stand back as you open the door and allow the steam  
to escape.  
ATTENTION : Faites attention lorsque vous ouvrez la porte. La vapeur brûlante qui s’échappe  
lorsque vous ouvrez la porte pendant un programme de lavage peut causer des  
brûlures. Lorsque vous ouvrez la porte, reculez et laissez la vapeur s’échapper  
de l’appareil.  
To restart the wash process, close the door until it locks in place. Re-press the cycle button. There  
may be a time delay of up to a few minutes, because the temperature inside the Chef’s Washer  
needs to stabilize before it restarts the wash cycle. During this time the SENSING light will be on.  
To cancel the cycle after it has started, press and hold the START/CANCEL button for 3 seconds.  
The Chef’s Washer will then drain and the cycle indicator lights will flash. At this point a new wash  
cycle can be selected. If a new cycle is not selected, all the Cycle Indicator lights will go out after the  
Chef’s Washer drains. If you have selected a new wash cycle, remember to add more detergent to  
the detergent compartment if required.  
11  
 
Control Panel – ZBD7005 & ZBD7105  
Chef’s Washer  
You can locate  
your model  
ZBD7005 & ZBD7105  
number on the  
inside upper  
tub flange.  
Throughout this  
manual, features  
and appearance  
may vary from  
your model.  
1
2
3
4
1. Cycle Selections–The light on the selected pad will illuminate to indicate which cycle has been  
selected.  
Control  
Settings  
HEAVY DUTY  
For pans or cookware with dried-on or baked-on soils.  
This cycle may not remove some burned-on foods.  
NORMAL WASH For loads of everyday cookware with medium soils. NOTE: For heavily soiled  
cookware, choose NORMAL WASH plus HIGH water temperature option.  
LIGHT WASH  
RINSE ONLY  
For lightly soiled cookware or recently used, lightly soiled cooking utensils  
and cookware to be washed in a short time.  
For rinsing partial loads that will be washed later. Do not use detergent with  
this cycle.  
2. WATER TEMP–This button provides extra heat options to increase water temperature for  
optimum performance.  
NORMAL  
This is the default setting–provides a wash and rinse with water temperatures  
up to 125°F (51°C) in LIGHT WASH, 135°F (57°C) in the NORMAL WASH  
cycle and 155°F (68°C) in HEAVY DUTY.  
HI TEMP  
SANITIZE  
This water temp selection provides a wash and rinse with water temperatures  
up to 160°F (71°C) in LIGHT WASH, NORMAL WASH and HEAVY DUTY.  
This water temp selection provides a sanitizing wash and rinse with water  
temperatures up to 160°F (71°C) in LIGHT WASH and 171°F (77°C) in NORMAL  
WASH and HEAVY DUTY. This selection cannot be used with RINSE ONLY.  
At the end of the wash cycle, the SANITIZE OPTION light will remain  
illuminated to indicate that the sanitization conditions have been met.  
E
NSF INTERNATIONAL  
Meets NSF Protocol for Performance of Domestic Spray-Type Pots  
and Pans Washing Machines (NSF Protocol P180) Requirements for  
cleaning and sanitization of cookware.  
NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.  
3. SMART DRY–When selected, sensors detect the presence of rinse aid and the final rinse  
temperature. The drying heater and fan are then turned on for the minimum time to achieve  
optimum drying results, saving energy over conventional heated dry and time over non-heated  
dry. SMART DRY is not available on RINSE ONLY.  
12  
 
Control Panel/Operation – ZBD7005 & ZBD7105  
Chef’s Washer  
4. DELAY START–This option will allow you to delay the start time of any wash cycle except  
RINSE ONLY for up to 6 hours.  
Control  
Settings  
• Select the delay start time you want by pressing the DELAY START button. Multiple pressing  
will alternate the delay time between 2, 4 or 6 hours and OFF.  
To start the Chef’s Washer, open the Chef’s Washer door so that the top-of-door controls are  
visible. The last used cycle will be displayed. To begin this cycle, press the START button. To select  
a different cycle, press the desired Cycle Selection and Option buttons, and then press the START  
button. After the door is closed and latched, the selected cycle will begin.  
Start a  
Wash Load  
To interrupt/pause a cycle, gently open the door just enough to turn off the wash motor. Do not  
fully open the door until the wash action ceases.  
WARNING: Do not fully open door while the Chef’s Washer is in operation. Quickly opening  
the door while the Chef’s Washer is operating could result in serious scalding.  
Be careful when opening the door; the hot steam that escapes when the door  
is opened may cause injuries. Stand back as you open the door and allow the  
steam to escape.  
AVERTISSEMENT : N’ouvrez pas complètement la porte lorsque la laveuse fonctionne. Une  
ouverture rapide de la porte lorsque l’appareil est en fonctionnement  
peut entraîner de sérieuses brûlures. Faites attention lorsque vous ouvrez  
la porte; la vapeur brûlante qui s’échappe lors de l’ouverture de la porte  
peut causer des blessures. Tenez vous en arrière lorsque vous ouvrez la  
porte afin de permettre à la vapeur de s’échapper.  
To restart the wash process, close the door until it locks in place. There may be a time delay of  
up to a few minutes because the temperature inside the Chef’s Washer needs to stabilize before  
it restarts the wash cycle.  
To cancel the cycle after it has started, press and hold the START/CANCEL button for 3 seconds.  
The Chef’s Washer will start to drain and the cycle indicator lights will flash. At this point a new  
wash cycle can be selected. If a new cycle is not selected, all the Cycle Indicator lights will go out  
after the Chef’s Washer drains completely. If you have selected a new wash cycle, remember to  
add more detergent to the detergent compartment if required.  
13  
 
Features – ZBD6605, ZBD6905, ZBD7005, ZBD7105  
Chef’s Washer  
You can prevent the beep from sounding when selecting control settings.  
Tone  
1. Press the START/CANCEL and NORMAL WASH buttons together prior to selecting settings.  
Silencing  
(on some  
models)  
2. To have sound again, simply press the START/CANCEL and NORMAL WASH buttons  
together again.  
Your Chef’s Washer has the ability to remember what options you like with NORMAL WASH and  
HEAVY DUTY wash cycle. This means that if you select NORMAL WASH, your Chef’s Washer will  
automatically select the options that you selected last time you washed with the NORMAL WASH cycle.  
You can change the options that have been remembered with a particular wash cycle if you desire.  
Auto  
Memory  
To reduce the possibility of children starting the Chef’s Washer when unattended, a child lockout  
feature can be enabled. Once enabled, each button must be pressed and held for two seconds until  
you hear a BEEP, before the Chef’s Washer will respond. While in this mode, the SENSING and  
CLEAN light will illuminate while the button is pressed.  
Child  
Lockout  
Mode  
(on some  
models)  
This feature can be enabled by pressing both the START/CANCEL and HEAVY DUTY buttons  
together and holding both for two seconds. You will hear three BEEPS when the child lockout  
is enabled.  
The child lockout can be cancelled by pressing the START/CANCEL and HEAVY DUTY together  
and holding both pressed for two seconds until a single BEEP is heard.  
NOTE: Child lockout overrides tone silencing.  
APPROXIMATE CYCLE TIME  
Cycle Chart  
With 120°F Water  
(excluding drying time)  
TEMPERATURE (°F)  
WATER USAGE  
(Gallons)  
Sani  
(on some  
models)  
CYCLES  
Normal  
155  
High  
Normal  
High  
77  
Sani  
HEAVY DUTY  
NORMAL WASH  
LIGHT WASH  
SPEED WASH  
RINSE ONLY  
160  
171  
7.4  
5.0–11.2  
5.0  
70  
50  
30  
23  
11  
84  
80  
63  
135  
145–160 160–171  
94  
125  
135–160  
160  
50  
115–125  
3.8  
1.2  
SOFT WATER  
0–3 grains  
MEDIUM WATER  
3–7 grains  
HARD WATER  
7–12 grains*  
Detergent  
Usage  
CYCLES  
Main Cup  
Auxiliary Cup  
None  
Main Cup  
Full  
Auxiliary Cup Main Cup Auxiliary Cup  
Guide  
HEAVY DUTY  
NORMAL WASH  
LIGHT WASH  
SPEED WASH  
RINSE ONLY  
Full  
Full  
Full  
Full  
Full  
Full  
Full  
Full  
Full  
Full  
Full  
Full  
Full  
(Powder or  
Liquid)  
1
2
None  
Full  
None  
None  
Full  
1
2
None  
Full  
1
2
None  
Full  
Use no detergent  
Use no detergent  
Use no detergent  
*12 grains and up is extremely hard water. A water softener  
is recommended. Without it, lime can build up in the water  
valve. The water valve may stick and flooding could occur.  
NOTE: The above chart is a general guide. Detergent  
amounts should be adjusted depending on the amount  
and type of soil until satisfactory results are achieved.  
14  
 
Using the Chef’s Washer  
Chef’s Washer  
The entering water must be at least 120°F  
(49°C) and not more than 150°F (66°C), for  
effective cleaning and to prevent dish damage.  
Check the water temperature with a candy or  
meat thermometer. Turn on the hot water  
faucet nearest the Chef’s Washer, place  
the thermometer in a glass and let the water  
run continuously into the glass until the  
temperature stops rising.  
Water  
Temperature  
A rinse agent improves dry performance,  
reduces spots and prevents new film buildup  
on your dishes, glasses, flatware, cookware  
and plastic.  
• If rinse agent spills, wipe it up immediately.  
It can keep your detergent from working.  
Use a Rinse  
Agent  
If after washing you notice cloudy spots,  
streaks or water marks on the glassware, and  
the rinse agent dispenser is not empty, it may  
be necessary to increase the dispenser settings.  
To do so, remove the cap and using a butter  
knife, rotate the indicator arrow to a higher  
number. Replace the cap when done.  
Fill the rinse agent chamber by rotating the  
round cap counterclockwise and remove. Fill  
chamber to maximum level. Replace and lock  
the cap into place.  
To check if rinse agent is needed: a solid black  
indicator indicates sufficient rinse agent; a clear  
indicator indicates a low level and requires  
adding more rinse agent.  
If glasses appear smeared or there is foam  
present on the bottom of the glasses or the  
bottom of the machine, select a lower dosage  
number.  
• A full dispenser should last about one month.  
For softened water, reduce dispenser setting.  
Light level indicator  
Adjust to higher or lower number  
Use only detergent specifically made for use in  
dishwashers. Keep your powdered detergent  
fresh and dry. Don’t put powder detergent into  
the dispenser until you’re ready to wash dishes.  
When using automatic dishwashing detergent  
tabs, place one tab in the main cup and close.  
Detergents  
Be sure the Cycle Status Indicators (on some  
models) are not lit before adding detergent.  
Otherwise, the detergent cup will not close and  
latch properly. Add detergent, then close the  
main cup.  
The amount of detergent to use depends on  
whether your water is hard or soft. With hard  
water, you need extra detergent. With soft  
water, you need less detergent.  
NOTE: To open detergent cup after it has been  
Protect your dishes and Chef’s Washer by  
contacting your water department and asking  
how hard your water is. Twelve or more grains  
is extremely hard water. A water softener is  
recommended. Without it, lime can build up  
in the water valve, which could stick while open  
and cause flooding. Too much detergent with  
soft water can cause a permanent cloudiness  
of glassware, called etching.  
closed, push the lever latch inward.  
Main compartment  
Auxiliary  
compartment  
Lever  
To open the detergent compartment, push the  
lever latch inward.  
15  
 
Loading the Racks  
Chef’s Washer  
This Chef’s Washer is designed for dishwasher-safe gourmet cookware.  
The upper rack is for small bowls and pans. This is  
also a secure place for dishwasher-safe plastics.  
Upper Rack  
Because bowls and casserole dishes come in various  
sizes, after loading, slowly push in the rack to make sure  
they will clear the top of the Chef’s Washer.  
The upper rack is also good for all kinds of oddly-  
shaped utensils. Saucepans, mixing bowls and other  
items should be placed face down.  
Make sure small plastic items are secure so they can’t  
fall onto the heating element.  
The upper rack can be raised or lowered to  
provide extra room for different sized items.  
Empty the upper rack. Remove the rail pegs  
in the front of the rack runners by squeezing  
and lifting the top of the peg, then slide the  
Re-insert the rack in the chosen position and  
replace the pegs. Check that the spray arm is  
free to rotate.  
Adjusting  
Upper Rack  
Height  
rack out.  
Lift peg from  
rack runner  
Re-adjust  
upper rack  
Squeeze  
Take care not to obstruct the rotation of the  
spray arm under the upper rack or cover the  
water collector in the center of the upper rack.  
Upper  
Wash  
Tower  
16  
 
Put flatware in the removable basket with fork and knife handles up to protect your hands. Place  
spoons in the basket with handles down. Mix knives, forks and spoons so they don’t nest together.  
Distribute evenly. Small plastic items, such as measuring spoons and lids from small containers,  
should go in the bottom of the silverware basket with silverware on top.  
Silverware  
and Utensil  
Basket  
Flip-down covers can be lowered to secure lightweight items from the effects of the vigorous wash  
action. The slots in the covers can be used to separate silverware.  
Don’t let any item extend through bottom  
When loading the lower rack, do not load tall platters  
or trays in the front left corner. They may prevent  
detergent cup from opening during the wash cycle.  
Lower Rack  
The lower rack is best used for large trays, saucepans  
and cookware. There is 15clearance for tall items.  
Large items such as broiler pans and racks should go  
along the sides. Load platters, pots and bowls along  
the sides, in corners or in the back. The soiled side  
of items should face down or the center of the rack.  
Fold-down tray dividers provide flexibility for extra  
large and hard-to-fit items.  
The tray dividers may be left in the up position or  
folded down to customize the lower rack.  
Tray Divider  
17  
 
Care and Cleaning  
Chef’s Washer  
To clean the control panel, use a lightly dampened cloth, then dry thoroughly. To clean the  
exterior painted panels, use a good appliance polish wax.  
Exterior  
Interior  
Never use sharp objects, scouring pads or harsh cleaners on any part of the Chef’s Washer.  
Use stainless steel cleaner on stainless steel panel. You can order Stainless Steel Magic # WX10X15  
through GE Parts in the USA, by calling 800.626.2002. In Canada, call 1.888.880.3030.  
The stainless steel tub can be cleaned with Stainless Steel Magic or a similar product using  
a clean, soft cloth.  
Use stainless steel cleaner on stainless steel panel. You can order Stainless Steel Magic # WX10X15  
through GE Parts in the USA, by calling 800.626.2002. In Canada, call 1.888.880.3030.  
Wipe the rubber door seals occasionally, including the seal at the bottom of the door.  
If your Chef’s Washer is left in an unheated place during the winter, ask a service technician to:  
1. Cut off electrical power to the Chef’s Washer. Remove fuses or trip circuit breaker.  
2. Turn off the water supply and disconnect the water inlet line from the water valve.  
3. Drain water from the water inlet line and water valve. (Use a pan to catch the water.)  
4. Reconnect the water inlet line to the water valve.  
Protect  
Against  
Freezing  
5. Remove the filters from the tub bottom and use a sponge to soak up water.  
An air gap protects your Chef’s Washer against  
The Air  
Gap  
Two types  
of air gaps  
water backing up into it if a drain clogs. The air  
gap is not a part of the Chef’s Washer. It is not  
covered by your warranty. Not all plumbing  
codes require air gaps, so you may not have one.  
The air gap is easy to clean.  
1. Turn off the Chef’s Washer and lift off the  
chrome cover.  
2. Unscrew the plastic cap and clean with  
a toothpick.  
Check the air gap any time your Chef’s Washer  
isn’t draining well.  
18  
 
Periodically, remove and clean the spray arms  
to make sure that none of the nozzles have  
become blocked.  
Removing  
and Cleaning  
the Spray  
Arms and  
Glass Trap  
Pull up to remove  
To remove the lower spray arm, grasp the  
center of the spray arm and pull upward; it will  
unclip. When replacing, make sure the spray  
arm is fully seated and spins.  
The plastic cone on the underside of the  
spray arm can be detached by unscrewing it  
counterclockwise.  
To remove the upper spray arm, carefully  
unscrew the spray arm from the plastic tower.  
To achieve this, hold the inner tower steady  
and unscrew the spray arm clockwise. To  
replace the spray arm, carefully screw the spray  
arm counterclockwise onto the inner tower.  
Rotate counterclockwise  
to remove cone  
To clean the upper and lower spray arms,  
rinse them under running water and make  
sure spray nozzles are clear.  
The glass trap is located in the stainless steel  
filter at the base of your Chef’s Washer. The  
glass trap is used to collect larger food items  
and other foreign objects, which may be too  
big to pass through the drain pump. For best  
wash performance, check the glass trap  
occasionally.  
Rotate counterclockwise and  
lift to remove glass trap  
To remove the glass trap, twist counterclockwise,  
rotate the glass trap and lift. To clean the glass  
trap, empty and rinse thoroughly. To replace,  
reverse these steps, making sure the glass trap  
locks into place.  
19  
 
Care and Cleaning  
Chef’s Washer  
In addition to the glass trap, your Chef’s  
Washer has three fine filters–  
The Wash  
Filters  
a two piece round perforated stainless steel  
filter located in the base of the Chef’s Washer.  
a finer micro-mesh filter located under the  
stainless steel filter.  
Grip filter and lift  
to remove  
a super fine filter located below the lower  
spray arm.  
Perforated stainless  
steel filter  
Remove the stainless steel filter by first twisting  
and removing the glass trap. Lift out the  
stainless steel filter.  
Micro-mesh filter  
Attached to the underside of this filter is the  
micro-mesh filter. To remove the micro-mesh  
filter, squeeze the two clips above the stainless  
steel filter to release the micro-mesh.  
To remove the super fine filter, remove the  
lower spray arm. Grasp the super fine filter  
around the outer edges. Remove by pulling  
upward; it will unclip. Unscrew the tower  
counterclockwise. The right half of the stainless  
steel filter can now be removed.  
Squeeze clips to remove  
micro-mesh filter  
To clean filters, place under running water  
and gently brush with a soft bristled brush.  
Be careful not to deform filters while cleaning,  
as this may prevent them from being properly  
re-installed.  
Pull super fine  
filter up to remove  
The super fine filter is self-cleaning; there is  
no need to clean it. This filter need only be  
removed if you want to remove the right half  
of the stainless steel filter.  
Replace your filters in the reverse order,  
starting with the right half of the stainless  
steel filter. Then screw in the tower. Replace  
the super fine filter over the tower by pressing  
firmly on the outer edge until it clips into  
place and reposition the lower spray arm.  
Reconnect the micro-mesh filter to the left  
half of the stainless steel filter prior to  
Lift stainless steel  
filter to remove  
replacing it back into the Chef’s Washer. Then  
replace the glass trap. Ensure that all filters  
are replaced correctly for best results.  
20  
 
For best performance, check the water fill level of your  
Chef’s Washer.  
Water Fill  
Level  
Maximum level  
Once the Chef’s Washer is fully connected, run it through  
a complete RINSE ONLY (on some models) cycle to  
ensure it is emptying and filling correctly. For low water  
pressure situations, run the RINSE ONLY (on some  
models) cycle 3 times. Halfway through the final RINSE  
ONLY (on some models) cycle, pause the Chef’s Washer  
and check the water level inside the Chef’s Washer. If the  
water level is not above the minimum water level (marked  
on the lower spray support tower), increase the fill level.  
Minimum level  
Continue to press the  
START/CANCEL button until the  
desired indicator is illuminated.  
1. Ensure the Chef’s Washer is not running through a  
cycle. Depress the WATER TEMP button for ten  
seconds until the second buzzer sounds.  
Cycle Status  
Indicators  
Fill time  
2. Press the START/CANCEL button to select fill time,  
SENSING  
WASHING  
RINSING  
DRYING  
CLEAN  
55 seconds  
60 seconds  
65 seconds  
75 seconds  
85 seconds  
as per chart (65 seconds is the factory setting).  
3. To test time, press DELAY START. The Chef’s Washer  
will start filling. Listen for the Chef’s Washer to  
complete filling. Once filled, the fill level must be  
checked to ensure fill time is correct.  
4. Once complete, press the WATER TEMP button to  
exit fill time mode.  
21  
 
Before You Call For Service  
Chef’s Washer  
PROBLEM  
POSSIBLE CAUSE  
WHAT TO DO  
Questions?  
Use this  
problem  
solver  
Chef’s Washer  
will not run  
Door not properly  
closed  
Press door until it clicks shut.  
Door is opened during  
the cycle when the water  
is hot  
Relatch door. Wait a few minutes; Chef’s  
Washer will start automatically after the  
temperature stabilizes.  
Child Lockout Mode  
is selected  
Press and hold desired button for two  
seconds to activate. See Child Lockout Mode  
section for more details.  
Fuse is blown, or the  
Reset the circuit breaker.  
circuit breaker tripped  
Replace fuse or reset circuit breaker.  
Remove any other appliances from the circuit.  
Power supply not  
connected  
Check that the Chef’s Washer is plugged in  
and the switch is on.  
Unusual noises  
Some of the sounds you  
will hear are normal:  
• Detergent cup opening  
• Water draining out of  
the tub after touching a  
keypad or starting a cycle  
Utensils are not secure in Make sure everything is secured in  
the rack or something  
small has dropped into  
the rack  
Chef’s Washer.  
Foreign material in  
the sump  
Clean the filters/foreign objects cover.  
Reposition the dishes.  
Detergent left in  
dispenser cups  
Dishes are blocking the  
detergent cups  
Water will not pump  
out of the tub  
Disposer knock-out plug Remove knock-out plug.  
has not been removed  
Drain is clogged  
Clean air gap (if applicable).  
If the Chef’s Washer drains into a disposer,  
run disposer to assure it is draining properly.  
Check to see if your kitchen sink is draining  
well. If not, you may need a plumber.  
Suds in the tub  
Correct detergent was  
not used  
Use only automatic dishwasher detergents  
to avoid sudsing.  
To remove suds from the tub, open the  
Chef’s Washer and let suds evaporate. Add  
1 gallon of cold water to the tub.  
For 7000 series models:  
Pump out water by pressing the NORMAL  
WASH button, then press start.  
Close the door until it locks into place.  
Wait for one minute, then carefully  
open the door and hold down the  
START/CANCEL button for three seconds.  
22  
 
PROBLEM  
POSSIBLE CAUSE  
WHAT TO DO  
Questions?  
Use this  
problem  
solver  
Suds in the tub (cont.)  
For all other models:  
Pump out water by closing the door until  
it locks into place.  
Press the NORMAL WASH button, then  
press start.  
Wait for one minute, then press and hold  
down the START/CANCEL button for  
three seconds. Repeat if necessary.  
Too much rinse agent used • Remove any spilled rinse aid.  
Reduce rinse aid setting.  
For soft water, rinse aid may be unnecessary.  
Dishes and flatware  
not clean  
Improper rack loading  
Filter or spray arms dirty  
Make sure large dishware does not block  
the detergent dispenser or the wash arm.  
Assure silverware is not blocking spray arm.  
Clean filters and spray arms according to  
instructions on page 20.  
Inlet water temperature  
is below 120°F  
Run tap until water is hot, prior to starting  
Chef’s Washer cycle.  
• Raise the water heater temperature to 120°F.  
Depending on model, use WATER TEMP  
HIGH or WATER TEMP SANI option if  
suitable for dish load.  
Air gap is clogged  
Clean the air gap.  
Water pressure is  
temporarily low  
Turn on a faucet. Is water coming out more  
slowly than usual? If so, wait until pressure  
is normal before using your Chef’s Washer.  
Water leaks through  
door handle  
Opening door during  
cycle without pausing  
machine first  
Pause the cycle before opening the door.  
Follow instructions for interrupting the  
cycle for your specific model.  
23  
 
Before You Call For Service  
Chef’s Washer  
PROBLEM  
POSSIBLE CAUSE  
WHAT TO DO  
Questions?  
Use this  
problem  
solver  
Black or gray marks  
on dishes  
Aluminum utensils have  
rubbed against dishes  
• Remove marks with a mild, abrasive cleaner.  
Dishes do not dry  
HEAT/SMART DRY  
not selected  
• Depending on model, select HEAT DRY  
or SMART DRY.  
Rinse agent dispenser  
is empty  
• Check the rinse agent dispenser.  
Chef’s Washer is paused  
To restart the wash cycle, press the selected  
wash button.  
Low inlet water  
• Run tap until water is hot prior to starting  
Chef’s Washer cycle.  
• Assure inlet water temperature is at  
least 120°F.  
• Depending on your model, select WATER  
TEMP HIGH & HEAT DRY or WATER  
TEMP SANI and HEAT DRY options.  
Chef’s Washer won’t start Door not properly closed • Press door until it clicks shut.  
Door opened during cycle • Re-latch door. Wait a few minutes; Chef’s  
when water is hot  
Washer will restart automatically.  
Child Lockout mode  
is selected  
• Press and hold desired button for two  
seconds. See Child Lockout mode section  
for models ZBD6905, ZBD 7005 and ZBD 7105.  
Power supply not connected • Check that Chef’s Washer is plugged in and  
switch is on.  
All cycle status indicators Door not properly closed • Press door until it clicks shut.  
flashing or beeping every  
30 seconds (on ZBD6905,  
ZBD 7005 and ZBD 7105)  
Chef’s Washer is paused  
To restart the wash cycle, press the selected  
wash button.  
Motor starts but water  
doesn’t enter Chef’s  
Washer (flashing POTS  
LIGHT) (on models  
ZBD 6905, ZBD 7005  
and ZBD 7105)  
Water supply valve  
turned off  
• Open water supply valve.  
Program taking too  
long or not advancing  
properly  
Low inlet water temperature • Run tap until water is hot prior to starting  
Chef’s Washer cycle.  
• Allow time to heat water (up to one hour).  
• Check inlet water temperature.  
• Connect to hot water supply.  
24  
 
PROBLEM  
POSSIBLE CAUSE  
WHAT TO DO  
Questions?  
Use this  
problem  
solver  
Water does not empty  
out of Chef’s Washer  
(flashing RINSE ONLY  
light) (on models  
ZBD6905, ZBD7005 and  
ZBD7105)  
Outlet blocked  
• Check garbage disposal and air gap  
for blockage.  
• Check outlet hose for kinks and sharp bends.  
Chef’s Washer continues Faulty fill valve  
to drain indefinitely  
• First, turn off water supply valve, then turn  
off circuit breaker and call for service.  
Yellow color on dishes  
and glassware  
Water has iron or other  
mineral content  
• A special filter in the water supply line is  
the only way to correct this problem.  
Contact a water softener company.  
White film on glasses;  
tea and coffee stains  
Hard water  
Try progressively increasing the Rinse Aid  
setting to 6. See the Rinse Agent section.  
Repeated use of Sani  
• Discontinue use of Sani option.  
Brown spots or pitting  
of stainless steel;  
tarnishing of silver  
Consistently low water  
level in Chef’s Washer  
• Check that operating water level is between  
the MIN. and MAX. indicators on lower  
spray arm support tower. See Care and  
Cleaning section.  
Electrolysis following  
contact with other metals  
• Wash scratched or worn pieces by hand.  
Polish silverware with a silver-plate cleaner.  
Detergent thrown over the • Load detergent properly. See Using the  
cutlery or saucepans  
Chef’s Washer section.  
Light goes out  
• Call for service.  
25  
 
Consumer Services  
monogram.com  
Chef’s Washer  
With the purchase of your new Monogram appliance, receive the  
assurance that if you ever need information or assistance from GE,  
we’ll be there. All you have to do is call–toll-free!  
®
Whatever your question about any Monogram major appliance, GE Answer Center  
GE Answer  
Center®  
information service is available to help. Your call–and your question–will be answered  
promptly and courteously. And you can call any time. GE Answer Center service is open  
®
24 hours a day, 7 days a week.  
In the USA:  
800.626.2000  
OR  
Visit our Website at: monogram.com  
In Canada, call 1.888.880.3030.  
A GE consumer service professional will provide expert repair service, scheduled at a time  
that’s convenient for you. Many GE Consumer Service company-operated locations offer you  
service today or tomorrow, or at your convenience (7:00 a.m. to 7:00 p.m. weekdays, 9:00 a.m.  
to 2:00 p.m. Saturdays). Our factory-trained technicians know your appliance inside and out–  
so most repairs can be handled in just one visit.  
In-Home  
Repair Service  
In the USA:  
800.444.1845  
In Canada:  
1.888.880.3030  
GE offers Braille controls for a variety of GE appliances, and a  
brochure to assist in planning a barrier-free kitchen for persons  
with limited mobility.  
For Customers  
With Special  
Needs…  
Consumers with impaired hearing or speech who have access to a  
TDD or a conventional teletypewriter may call 800.TDD.GEAC  
(800.833.4322) to request information or service.  
In the USA:  
800.626.2000  
You can have the secure feeling that GE Consumer Service will still be there after your  
warranty expires. Purchase a GE contract while your warranty is still in effect and you’ll  
receive a substantial discount. With a multiple-year contract, you’re assured of future  
service at today’s prices.  
Service Contracts  
In the USA:  
800.626.2224  
In Canada:  
1.888.880.3030  
Individuals qualified to service their own appliances can have parts or accessories sent directly  
to their home. The GE parts system provides access to over 47,000 parts…and all GE Genuine  
Renewal Parts are fully warranted.  
Parts and  
Accessories  
User maintenance instructions contained in this manual cover procedures intended to be  
performed by any user. Other servicing generally should be referred to qualified service  
personnel. Caution must be exercised, since improper servicing may cause unsafe operation.  
In the USA:  
800.626.2002  
In Canada:  
1.888.880.3030  
26  
 
Warranty for customers in the USA  
Chef’s Washer  
YOUR MONOGRAM CHEF’S WASHER WARRANTY  
Staple sales slip or cancelled check here. Proof of original purchase  
date is needed to obtain service under warranty.  
ONE-YEAR  
WHAT IS  
Any part of the Chef’s Washer which fails due to a defect in materials or workmanship. During  
this full one-year warranty, GE will also provide, free of charge, all labor and in-home service to  
replace the defective part.  
COVERED  
From the Date  
of the Original  
Purchase  
Second Year  
Any part of the Chef’s Washer which fails due to a defect in materials or workmanship. During  
this second-year limited warranty, you will be responsible for any labor or in-home service costs.  
Five Years  
The Chef’s Washer rack, if it should rust, or the electronic control module, if it should fail due  
to a defect in materials or workmanship. During this five-year limited warranty, you will be  
responsible for any labor or in-home service costs.  
Lifetime  
The stainless steel tub or door liner, if it fails to contain water due to a defect in materials or  
workmanship. During this full lifetime warranty, GE will also provide, free of charge, all labor  
and in-home service to replace the defective part.  
This warranty is extended to the original purchaser and any succeeding owner for products  
purchased for ordinary home use in the 48 mainland states, Alaska, Hawaii and Washington, D.C.  
Proof of original purchase date is needed to obtain service under the warranty.  
All warranty service will be provided by our Factory Service Centers or by our authorized  
®
Customer Care servicers during normal working hours.  
Should your appliance need service, during warranty period or beyond, call 800.444.1845.  
• Service trips to your home to teach you how  
to use the product.  
• Damage to the product caused by accident,  
fire, floods or acts of God.  
WHAT IS NOT  
COVERED  
• Improper installation, delivery or  
maintenance.  
• Incidental or consequential damage caused by  
possible defects with this appliance.  
• Replacement of house fuses or resetting  
of circuit breakers.  
• Cleaning or servicing of the air gap device in  
the drain line.  
• Failure of the product if it is abused, misused, • Damage after delivery.  
or used for other than the intended purpose  
or used commercially.  
Some states do not allow the exclusion or limitation of incidental or consequential damages,  
so the above limitation or exclusion may not apply to you. This warranty gives you specific legal  
rights, and you may also have other rights which vary from state to state. To know what your  
legal rights are in your state, consult your local or state consumer affairs office or your state’s  
Attorney General.  
Warrantor: General Electric Company, Louisville, KY 40225.  
27  
 
Warranty for customers in Canada  
Chef’s Washer  
YOUR MONOGRAM CHEF’S WASHER WARRANTY  
Staple sales slip or cancelled check here. Proof of original purchase  
date is needed to obtain service under warranty.  
ONE-YEAR  
WHAT IS  
Any part of the Chef’s Washer which fails due to a defect in materials or workmanship. During  
this full one-year warranty, GE will also provide, free of charge, all labor and in-home service to  
replace the defective part.  
COVERED  
From the Date  
of the Original  
Purchase  
Second Year  
Any part of the Chef’s Washer which fails due to a defect in materials or workmanship. During  
this second-year limited warranty, you will be responsible for any labor or in-home service costs.  
Five Years  
The Chef’s Washer rack, if it should rust, or the electronic control module, if it should fail due  
to a defect in materials or workmanship. During this five-year limited warranty, you will be  
responsible for any labor or in-home service costs.  
Lifetime  
The stainless steel tub or door liner, if it fails to contain water due to a defect in materials or  
workmanship. During this full lifetime warranty, GE will also provide, free of charge, all labor  
and in-home service to replace the defective part.  
This warranty is extended to the original purchaser and any succeeding owner for products  
purchased for ordinary home use in Canada. Proof of original purchase date is needed to obtain  
service under the warranty.  
All warranty service will be provided by our Factory Service Centers or by our authorized  
®
Customer Care servicers during normal working hours.  
Should your appliance need service, during warranty period or beyond, call 1.888.880.3030.  
• Service trips to your home to teach you how  
to use the product.  
• Damage to the product caused by accident,  
fire, floods or acts of God.  
WHAT IS NOT  
COVERED  
• Improper installation, delivery or  
maintenance.  
• Incidental or consequential damage caused by  
possible defects with this appliance.  
• Replacement of house fuses or resetting  
of circuit breakers.  
• Cleaning or servicing of the air gap device in  
the drain line.  
• Failure of the product if it is abused, misused, • Damage after delivery.  
or used for other than the intended purpose  
or used commercially.  
Some provinces do not allow the exclusion or limitation of incidental or consequential damages,  
so the above limitation or exclusion may not apply to you. This warranty gives you specific legal  
rights, and you may also have other rights which vary from province to province. To know what  
your legal rights are in your province, consult your local or provincial consumer affairs office.  
Warrantor: Camco Inc., 1 Factory Lane, Suite 310, Moncton, N.B. E1C 9M3.  
28  
 
Notes  
Chef’s Washer  
29  
 
Notes  
Chef’s Washer  
30  
 
o d a y M a i l T t a n t I m p o r  
e g i s t r a t i o n O w n e r s h i p R  
o d u c t C o n s u m e r P r  
G E A p p l i a n c e s  
Place  
1st Class  
Letter  
Stamp  
Here  
General Electric Company  
Warranty Registration Department  
P.O. Box 32150  
Louisville, KY 40232-2150  
31  
 
Consumer Product Ownership Registration  
Dear Customer:  
Thank you for purchasing our product and thank you for placing your confidence in us. We are proud to  
have you as a customer!  
Follow these three steps to protect your new appliance investment:  
Complete and mail  
your Consumer  
After completing this  
registration, write your  
model and serial  
numbers in this manual.  
You will need this  
information should you  
require service. The  
service number in the  
USA: 800.444.1845. In  
Canada: 1.888.880.3030.  
Read your “Owner’s  
Manual” carefully.  
It will help you  
operate your new  
appliance properly.  
Product Ownership  
Registration today.  
Have the peace of mind  
of knowing we can  
contact you in the  
unlikely event of a  
safety modification.  
1
2
3
Important: To ensure that your product is registered, mail the separate product registration card.  
If the separate product registration card is missing, fold and mail the form below. No envelope is needed.  
FOLD HERE  
Consumer Product Ownership Registration  
Product  
Dishwasher  
Model  
Serial  
Miss  
Mr. Ms. Mrs. ꢀ  
First  
Name  
Last  
Name  
Street  
Address  
Apt. #  
Zip  
Code  
City  
State  
Date Placed  
In Use  
Month  
Phone  
Day  
Year  
Number  
Monogram®  
General Electric Company  
Louisville, KY 40225  
TAPE CLOSED  
165D4700P239  
49-5913-2  
0616400354 01-03 JR  
Printed in Australia  
 

EAW Speaker System AX364 User Manual
Edelbrock Automobile Accessories 29135 User Manual
Electro Voice Portable Speaker EJ1 X User Manual
Electro Voice Portable Speaker E V ELEVEN A User Manual
Evolution Technologies Automobile Parts 45GX2 User Manual
Extron electronic Switch ECP 1000 User Manual
Firstech LLC Remote Starter CS 600 User Manual
GE Monogram Refrigerator 36 User Manual
GE Range CGS980SEMSS User Manual
Giant Septic System MP4130HTC User Manual